Re: [PATCH] Allow MUSB DSPS to use "force host" mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 11/22/2013 04:55 PM, Mark Jackson wrote:
> The IDDIG input pin is normally used to determine the USB mode
> (i.e. HOST or DEVICE).
> 
> On some systems (e.g. AM335x) leaving this pin floating allows
> the USB mode to be set via software.

So you have a board where musb is used only as host or only as device
and the ID pin not on ground or 3.3V?
What are the side effects? I remember correctly Bin wanted to avoid
settings this if it could be avoided.

Sebastian
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux