an almost blind conversion from readl_relaxed
to our newly introduced intc_readl().
While at that, also remove some hardcoded
register addresses.
Signed-off-by: Felipe Balbi <balbi@xxxxxx>
---
arch/arm/mach-omap2/irq.c | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index 0772a3db..0fe790c 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -41,11 +41,13 @@
#define INTC_MIR_CLEAR0 0x0088
#define INTC_MIR_SET0 0x008c
#define INTC_PENDING_IRQ0 0x0098
+#define INTC_PENDING_IRQ1 0x00b8
+#define INTC_PENDING_IRQ2 0x00d8
+#define INTC_PENDING_IRQ3 0x00f8
#define INTC_ILR0 0x0100
#define OMAP2_IRQ_BASE OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE)
#define OMAP3_IRQ_BASE OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE)
-#define INTCPS_SIR_IRQ_OFFSET 0x0040 /* omap2/3 active interrupt offset */
#define ACTIVEIRQ_MASK 0x7f /* omap2/3 active interrupt bits */
#define INTCPS_NR_ILR_REGS 128
#define INTCPS_NR_MIR_REGS 3
@@ -191,26 +193,26 @@ static inline void omap_intc_handle_irq(void __iomem *base_addr, struct pt_regs
u32 irqnr;
do {
- irqnr = readl_relaxed(base_addr + 0x98);
+ irqnr = intc_readl(INTC_PENDING_IRQ0);
if (irqnr)
goto out;
- irqnr = readl_relaxed(base_addr + 0xb8);
+ irqnr = intc_readl(INTC_PENDING_IRQ1);
if (irqnr)
goto out;
- irqnr = readl_relaxed(base_addr + 0xd8);
+ irqnr = intc_readl(INTC_PENDING_IRQ2);
#if IS_ENABLED(CONFIG_SOC_TI81XX) || IS_ENABLED(CONFIG_SOC_AM33XX)
if (irqnr)
goto out;
- irqnr = readl_relaxed(base_addr + 0xf8);
+ irqnr = intc_readl(INTC_PENDING_IRQ3);
#endif
out:
if (!irqnr)
break;
- irqnr = readl_relaxed(base_addr + INTCPS_SIR_IRQ_OFFSET);
+ irqnr = intc_readl(INTC_SIR);
irqnr &= ACTIVEIRQ_MASK;
if (irqnr) {
--
1.8.4.GIT
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
