This patch will register bq24150a charger in RX-51 board data.
So finally charging battery on Nokia N900 (RX-51) working
automatically without any proprietary Nokia bits in userspace.
Signed-off-by: Pali Rohár <pali.rohar@xxxxxxxxx>
---
arch/arm/mach-omap2/board-rx51-peripherals.c | 17 ++++++++++++++++-
1 file changed, 16 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 70fcaff..95e6638 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -25,6 +25,7 @@
#include <linux/gpio_keys.h>
#include <linux/mmc/host.h>
#include <linux/power/isp1704_charger.h>
+#include <linux/power/bq2415x_charger.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <linux/platform_data/mtd-onenand-omap2.h>
#include <linux/hsi/hsi.h>
@@ -1275,6 +1276,16 @@ static struct aic3x_pdata rx51_aic3x_data2 = {
.gpio_reset = 60,
};
+static struct bq2415x_platform_data rx51_bq24150a_platform_data = {
+ .current_limit = 100, /* mA */
+ .weak_battery_voltage = 3400, /* mV */
+ .battery_regulation_voltage = 4200, /* mV */
+ .charge_current = 650, /* mA */
+ .termination_current = 100, /* mA */
+ .resistor_sense = 68, /* m ohm */
+ .notify_device = "isp1704",
+};
+
static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = {
{
I2C_BOARD_INFO("tlv320aic3x", 0x18),
@@ -1302,7 +1313,11 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = {
{
I2C_BOARD_INFO("tpa6130a2", 0x60),
.platform_data = &rx51_tpa6130a2_data,
- }
+ },
+ {
+ I2C_BOARD_INFO("bq24150a", 0x6b),
+ .platform_data = &rx51_bq24150a_platform_data,
+ },
};
static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_3[] = {
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
