Hi Ramesh Guptha, Thanks a lot for your response. We can check this PRCM section. After reading IVA2_CM and MPU_CM registers, I want to know how to calculate the clock speeds. Since this procedure/formula will already be known, can you please let me know? Regards, Kishore. -----Original Message----- From: Ramesh Gupta Guntha [mailto:grgupta77@xxxxxxxxx] Sent: Wednesday, January 14, 2009 2:31 PM To: Krishna Kishore Cc: linux-omap@xxxxxxxxxxxxxxx Subject: Re: OMAP3430 clock settings Hi Krishna, On 1/14/09, Krishna Kishore <krishna.kishore@xxxxxxxxxx> wrote: > We need to find this out during runtime. Which register to read and > how to > know the clock settings of DSP, ARM and L3? Please refer to PRCM and Interconnect sections of the TRM, you may be interested in IVA2_CM, MPU_CM etc. thanks Ramesh SASKEN BUSINESS DISCLAIMER ------------------------- This message may contain confidential, proprietary or legally privileged information. In case you are not the original intended Recipient of the message, you must not, directly or indirectly, use, Disclose, distribute, print, or copy any part of this message and you are requested to delete it and inform the sender. Any views expressed in this message are those of the individual sender unless otherwise stated. Nothing contained in this message shall be construed as an offer or acceptance of any offer by Sasken Communication Technologies Limited ("Sasken") unless sent with that express intent and with due authority of Sasken. Sasken has taken enough precautions to prevent the spread of viruses. However the company accepts no liability for any damage caused by any virus transmitted by this email -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
