Op 13 jan 2009, om 22:51 heeft Kevin Hilman het volgende geschreven:
Hello, The latest PM branch is now available[1]. I've done basic testing of retention and off-mode (suspend and dynamic idle) on Beagle and custom HW. My SDP has something still keeping CORE active that others have not seen, but I have yet to debug. Any other reports from SDP testing would be appreciated. Notable changes/updates - rebased on latest clock updates and fixes from Paul - clockfw pre- and post- notifiers - DVFS for VDD2
The bootlog on my rev C1D beagle looks suspicious: Texas Instruments X-Loader 1.4.2 (Dec 3 2008 - 23:20:13) Reading boot sector Booting from mmc U-Boot 2009.01-rc1-00102-g8ecaab3 (Jan 10 2009 - 13:56:28) OMAP3530-GP rev 2, CPU-OPP2 L3-165MHz OMAP3 Beagle board + LPDDR/NAND DRAM: 256 MB NAND: 256 MiB musb: using high speed In: serial Out: serial Err: serial Board revision: Cx Debug (GPIO6 datain): 0x04800000 Hit any key to stop autoboot: 1 0 reading boot.scr ** Unable to read "boot.scr" from mmc 0:1 ** reading uImage 2556572 bytes read Booting from mmc ... ## Booting kernel from Legacy Image at 82000000 ... Image Name: Angstrom/2.6.28-pm1+gitrb5d11429 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2556508 Bytes = 2.4 MB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OKUncompressing Linux .................................................................................................................................................................... done , booting the kernel. Linux version 2.6.28-omap1 (koen@dominion) (gcc version 4.2.1) #1 Sun Jan 11 18:52:51 CET 2009
CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c5387f CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache Machine: OMAP3 Beagle Board Memory policy: ECC disabled, Data cache writeback On node 0 totalpages: 65536 free_area_init_node: node 0, pgdat c050be14, node_mem_map c0540000 Normal zone: 512 pages used for memmap Normal zone: 0 pages reserved Normal zone: 65024 pages, LIFO batch:15 Movable zone: 0 pages used for memmap OMAP3430 ES3.0 SRAM: Mapped pa 0x40200000 to va 0xd7000000 size: 0x100000Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024 Kernel command line: console=ttyS2,115200n8 video=omapfb:vram:2M,vram: 4M,mode:640x480@60 omapfb.debug=y omap-dss.debug=y loglevel=10 omapfb.vram=4M,4M root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait
Unknown boot option `omapfb.debug=y': ignoring Unknown boot option `omap-dss.debug=y': ignoring Unknown boot option `omapfb.vram=4M,4M': ignoring Clocking rate (Crystal/DPLL/ARM core): 26.0/332/500 MHz GPMC revision 5.0 IRQ: Found an INTC at 0xd8200000 (revision 4.0) with 96 interrupts Total of 96 interrupts on 1 active controller OMAP34xx GPIO hardware version 2.5 PID hash table entries: 1024 (order: 10, 4096 bytes) OMAP clockevent source: GPTIMER12 at 32768 Hz Console: colour dummy device 80x30 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 128MB 128MB = 256MB total Memory: 254336KB available (4712K code, 428K data, 188K init) Calibrating delay loop... 478.91 BogoMIPS (lpj=1867776) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok net_namespace: 532 bytes regulator: core version 0.5 NET: Registered protocol family 16 Found NAND on CS0 Registering NAND on CS0 ------------[ cut here ]------------WARNING: at arch/arm/mach-omap2/clock.c:1094 omap2_clk_register +0x24/0x3c()
Modules linked in:[<c003b824>] (dump_stack+0x0/0x14) from [<c005b180>] (warn_on_slowpath +0x4c/0x68) [<c005b134>] (warn_on_slowpath+0x0/0x68) from [<c00416a8>] (omap2_clk_register+0x24/0x3c)
r6:c04de968 r5:c04d82d8 r4:c04d8270[<c0041684>] (omap2_clk_register+0x0/0x3c) from [<c0048854>] (clk_register+0x44/0xc8) [<c0048810>] (clk_register+0x0/0xc8) from [<c00113ec>] (omap2_mcbsp_init+0xc8/0x130)
r7:c0469ded r6:00000008 r5:c04d82d8 r4:c04d8270[<c0011324>] (omap2_mcbsp_init+0x0/0x130) from [<c00372d4>] (do_one_initcall+0x64/0x198) [<c0037270>] (do_one_initcall+0x0/0x198) from [<c0008718>] (kernel_init +0x70/0xdc) [<c00086a8>] (kernel_init+0x0/0xdc) from [<c005db54>] (do_exit +0x0/0x6b4)
r5:00000000 r4:00000000 ---[ end trace 1b75b31a2719ed1c ]--- ------------[ cut here ]------------WARNING: at arch/arm/mach-omap2/clock.c:1094 omap2_clk_register +0x24/0x3c()
Modules linked in:[<c003b824>] (dump_stack+0x0/0x14) from [<c005b180>] (warn_on_slowpath +0x4c/0x68) [<c005b134>] (warn_on_slowpath+0x0/0x68) from [<c00416a8>] (omap2_clk_register+0x24/0x3c)
r6:c04de968 r5:c04d8340 r4:c04d82d8[<c0041684>] (omap2_clk_register+0x0/0x3c) from [<c0048854>] (clk_register+0x44/0xc8) [<c0048810>] (clk_register+0x0/0xc8) from [<c00113ec>] (omap2_mcbsp_init+0xc8/0x130)
r7:c0469ded r6:00000008 r5:c04d8340 r4:c04d8270[<c0011324>] (omap2_mcbsp_init+0x0/0x130) from [<c00372d4>] (do_one_initcall+0x64/0x198) [<c0037270>] (do_one_initcall+0x0/0x198) from [<c0008718>] (kernel_init +0x70/0xdc) [<c00086a8>] (kernel_init+0x0/0xdc) from [<c005db54>] (do_exit +0x0/0x6b4)
r5:00000000 r4:00000000 ---[ end trace 1b75b31a2719ed1c ]--- ------------[ cut here ]------------WARNING: at arch/arm/mach-omap2/clock.c:1094 omap2_clk_register +0x24/0x3c()
Modules linked in:[<c003b824>] (dump_stack+0x0/0x14) from [<c005b180>] (warn_on_slowpath +0x4c/0x68) [<c005b134>] (warn_on_slowpath+0x0/0x68) from [<c00416a8>] (omap2_clk_register+0x24/0x3c)
r6:c04de968 r5:c04d83a8 r4:c04d8340[<c0041684>] (omap2_clk_register+0x0/0x3c) from [<c0048854>] (clk_register+0x44/0xc8) [<c0048810>] (clk_register+0x0/0xc8) from [<c00113ec>] (omap2_mcbsp_init+0xc8/0x130)
r7:c0469ded r6:00000008 r5:c04d83a8 r4:c04d8270[<c0011324>] (omap2_mcbsp_init+0x0/0x130) from [<c00372d4>] (do_one_initcall+0x64/0x198) [<c0037270>] (do_one_initcall+0x0/0x198) from [<c0008718>] (kernel_init +0x70/0xdc) [<c00086a8>] (kernel_init+0x0/0xdc) from [<c005db54>] (do_exit +0x0/0x6b4)
r5:00000000 r4:00000000 ---[ end trace 1b75b31a2719ed1c ]--- ------------[ cut here ]------------WARNING: at arch/arm/mach-omap2/clock.c:1094 omap2_clk_register +0x24/0x3c()
Modules linked in:[<c003b824>] (dump_stack+0x0/0x14) from [<c005b180>] (warn_on_slowpath +0x4c/0x68) [<c005b134>] (warn_on_slowpath+0x0/0x68) from [<c00416a8>] (omap2_clk_register+0x24/0x3c)
r6:c04de968 r5:c04d8410 r4:c04d83a8[<c0041684>] (omap2_clk_register+0x0/0x3c) from [<c0048854>] (clk_register+0x44/0xc8) [<c0048810>] (clk_register+0x0/0xc8) from [<c00113ec>] (omap2_mcbsp_init+0xc8/0x130)
r7:c0469ded r6:00000008 r5:c04d8410 r4:c04d8270[<c0011324>] (omap2_mcbsp_init+0x0/0x130) from [<c00372d4>] (do_one_initcall+0x64/0x198) [<c0037270>] (do_one_initcall+0x0/0x198) from [<c0008718>] (kernel_init +0x70/0xdc) [<c00086a8>] (kernel_init+0x0/0xdc) from [<c005db54>] (do_exit +0x0/0x6b4)
r5:00000000 r4:00000000 ---[ end trace 1b75b31a2719ed1c ]--- ------------[ cut here ]------------WARNING: at arch/arm/mach-omap2/clock.c:1094 omap2_clk_register +0x24/0x3c()
Modules linked in:[<c003b824>] (dump_stack+0x0/0x14) from [<c005b180>] (warn_on_slowpath +0x4c/0x68) [<c005b134>] (warn_on_slowpath+0x0/0x68) from [<c00416a8>] (omap2_clk_register+0x24/0x3c)
r6:c04de968 r5:c04d8478 r4:c04d8410[<c0041684>] (omap2_clk_register+0x0/0x3c) from [<c0048854>] (clk_register+0x44/0xc8) [<c0048810>] (clk_register+0x0/0xc8) from [<c00113ec>] (omap2_mcbsp_init+0xc8/0x130)
r7:c0469ded r6:00000008 r5:c04d8478 r4:c04d8270[<c0011324>] (omap2_mcbsp_init+0x0/0x130) from [<c00372d4>] (do_one_initcall+0x64/0x198) [<c0037270>] (do_one_initcall+0x0/0x198) from [<c0008718>] (kernel_init +0x70/0xdc) [<c00086a8>] (kernel_init+0x0/0xdc) from [<c005db54>] (do_exit +0x0/0x6b4)
r5:00000000 r4:00000000 ---[ end trace 1b75b31a2719ed1c ]--- omap-mcbsp omap-mcbsp.1: Invalid clock configuration for McBSP1. omap-mcbsp: probe of omap-mcbsp.1 failed with error -2 omap-mcbsp omap-mcbsp.2: Invalid clock configuration for McBSP2. omap-mcbsp: probe of omap-mcbsp.2 failed with error -2 omap-mcbsp omap-mcbsp.3: Invalid clock configuration for McBSP3. omap-mcbsp: probe of omap-mcbsp.3 failed with error -2 omap-mcbsp omap-mcbsp.4: Invalid clock configuration for McBSP4. omap-mcbsp: probe of omap-mcbsp.4 failed with error -2 omap-mcbsp omap-mcbsp.5: Invalid clock configuration for McBSP5. omap-mcbsp: probe of omap-mcbsp.5 failed with error -2 OMAP DMA hardware revision 4.0 USB: No board-specific platform config found i2c_omap i2c_omap.1: bus 1 rev3.12 at 2600 kHz twl4030: PIH (irq 7) chaining IRQs 368..375 twl4030: power (irq 373) chaining IRQs 376..383 twl4030: gpio (irq 368) chaining IRQs 384..401 i2c_omap i2c_omap.3: bus 3 rev3.12 at 400 kHz SCSI subsystem initialized twl4030_usb twl4030_usb: Initialized TWL4030 USB module usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0 musb_hdrc: ConfigData=0x33 (UTMI-16, HB-ISO Rx (X), SoftConn) musb_hdrc: MHDRC RTL version 1.400 musb_core_init 1405: reconfigure software for static FIFOs musb_hdrc musb_hdrc: musb_init_controller failed with status -19 regulator: VMMC1: 1850 <--> 3150 mV normal standby regulator: VDAC: 1800 mV normal standby regulator: VUSB1V5: 1500 mV normal standby regulator: VUSB1V8: 1800 mV normal standby regulator: VUSB3V1: 3100 mV normal standby regulator: VSIM: 1800 <--> 3000 mV normal standby Bluetooth: Core ver 2.13 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized cfg80211: Using static regulatory domain info cfg80211: Regulatory domain: US (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) cfg80211: Calling CRDA for country: US NET: Registered protocol family 2 Switched to high resolution mode on CPU 0 IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP reno registered NET: Registered protocol family 1 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. msgmni has been set to 497 alg: No test for stdrng (krng) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Serial: 8250/16550 driver4 ports, IRQ sharing enabled serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a ST16654 serial8250.0: ttyS1 at MMIO 0x4806c000 (irq = 73) is a ST16654 serial8250.0: ttyS2 at MMIO 0x49020000 (irq = 74) is a ST16654 console [ttyS2] enabled brd: module loaded loop: module loaded usbcore: registered new interface driver asix usbcore: registered new interface driver cdc_ether usbcore: registered new interface driver rndis_host usbcore: registered new interface driver zd1211rw usbcore: registered new interface driver rndis_wlan usbcore: registered new interface driver zd1201 usbcore: registered new interface driver usb8xxx usbcore: registered new interface driver rtl8187 usbcore: registered new interface driver rt2500usb usbcore: registered new interface driver rt73usb usbcore: registered new interface driver p54usb i2c /dev entries driver input: triton2-pwrbutton as /class/input/input0 triton2 power button driver initialized Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods omap2-nand driver initializingNAND device: Manufacturer ID: 0x2c, Chip ID: 0xba (Micron NAND 256MiB 1,8V 16-bit)
cmdlinepart partition parsing not available Creating 5 MTD partitions on "omap2-nand": 0x00000000-0x00080000 : "X-Loader" 0x00080000-0x00260000 : "U-Boot" 0x00260000-0x00280000 : "U-Boot Env" 0x00280000-0x00680000 : "Kernel" 0x00680000-0x10000000 : "File System" ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-omap ehci-omap.0: OMAP-EHCI Host Controller ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1 ehci-omap ehci-omap.0: irq 77, io mem 0x48064800 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. mice: PS/2 mouse device common for all mice input: gpio-keys as /class/input/input1 twl4030_rtc twl4030_rtc: rtc core: registered twl4030_rtc as rtc0 twl4030_rtc twl4030_rtc: Power up reset detected. twl4030_rtc twl4030_rtc: Enabling TWL4030-RTC. OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec Bluetooth: HCI USB driver ver 2.10 usbcore: registered new interface driver hci_usb Bluetooth: Broadcom Blutonium firmware driver ver 1.2 usbcore: registered new interface driver bcm203x Bluetooth: Digianswer Bluetooth USB driver ver 0.10 usbcore: registered new interface driver bpa10x Bluetooth: Generic Bluetooth SDIO driver ver 0.1 cpuidle: using governor ladder cpuidle: using governor menu mmci-omap-hs mmci-omap-hs.0: Failed to get debounce clock Registered led device: beagleboard::usr0 Registered led device: beagleboard::usr1 Registered led device: beagleboard::pmu_stat usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.18rc3. usbcore: registered new interface driver snd-usb-audio ASoC version 0.13.2 OMAP3 Beagle SoC init TWL4030 Audio Codec init asoc: twl4030 <-> omap-mcbsp-dai-(link_id) mapping ok ALSA device list: #0: omap3beagle (twl4030) oprofile: using arm/armv7 TCP cubic registered NET: Registered protocol family 17 NET: Registered protocol family 15 Bluetooth: L2CAP ver 2.11 Bluetooth: L2CAP socket layer initialized Bluetooth: SCO (Voice Link) ver 0.6 Bluetooth: SCO socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.10 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bluetooth: HIDP (Human Interface Emulation) ver 1.2 RPC: Registered udp transport module. RPC: Registered tcp transport module. ieee80211: 802.11 data/management/control stack, git-1.1.13ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@xxxxxxxxxxxxxxx >
ieee80211_crypt: registered algorithm 'NULL' ieee80211_crypt: registered algorithm 'WEP' ieee80211_crypt: registered algorithm 'CCMP' ieee80211_crypt: registered algorithm 'TKIP' ThumbEE CPU extension supported. Power Management for TI OMAP3. pm_dbg_init() SmartReflex driver initialized Disabling unused clock "sr2_fck" Disabling unused clock "sr1_fck" Disabling unused clock "mcbsp_fck" Disabling unused clock "mcbsp_fck" Disabling unused clock "mcbsp_fck" Disabling unused clock "mcbsp_ick" Disabling unused clock "mcbsp_ick" Disabling unused clock "mcbsp_ick" Disabling unused clock "gpt2_ick" Disabling unused clock "gpt3_ick" Disabling unused clock "gpt4_ick" Disabling unused clock "gpt5_ick" Disabling unused clock "gpt6_ick" Disabling unused clock "gpt7_ick" Disabling unused clock "gpt8_ick" Disabling unused clock "gpt9_ick" Disabling unused clock "wdt3_ick" Disabling unused clock "wdt3_fck" Disabling unused clock "gpio2_dbck" Disabling unused clock "gpio3_dbck" Disabling unused clock "gpio4_dbck" Disabling unused clock "gpio5_dbck" Disabling unused clock "gpio6_dbck" Disabling unused clock "gpt9_fck" Disabling unused clock "gpt8_fck" Disabling unused clock "gpt7_fck" Disabling unused clock "gpt6_fck" Disabling unused clock "gpt5_fck" Disabling unused clock "gpt4_fck" Disabling unused clock "gpt3_fck" Disabling unused clock "gpt2_fck" Disabling unused clock "gpt1_ick" Disabling unused clock "wdt1_ick" Disabling unused clock "wdt2_ick" Disabling unused clock "wdt2_fck" Disabling unused clock "gpio1_dbck" Disabling unused clock "gpt1_fck" Disabling unused clock "cam_ick" Disabling unused clock "cam_mclk" Disabling unused clock "dss_ick" Disabling unused clock "dss_96m_fck" Disabling unused clock "dss1_alwon_fck" Disabling unused clock "des1_ick" Disabling unused clock "sha11_ick" Disabling unused clock "rng_ick" Disabling unused clock "aes1_ick" Disabling unused clock "ssi_ick" Disabling unused clock "mailboxes_ick" Disabling unused clock "mcbsp_ick" Disabling unused clock "mcbsp_ick" Disabling unused clock "gpt10_ick" Disabling unused clock "gpt11_ick" Disabling unused clock "i2c_ick" Disabling unused clock "mcspi_ick" Disabling unused clock "mcspi_ick" Disabling unused clock "mcspi_ick" Disabling unused clock "mcspi_ick" Disabling unused clock "hdq_ick" Disabling unused clock "mspro_ick" Disabling unused clock "des2_ick" Disabling unused clock "sha12_ick" Disabling unused clock "aes2_ick" Disabling unused clock "icr_ick" Disabling unused clock "pka_ick" Disabling unused clock "ssi_ssr_fck" Disabling unused clock "hdq_fck" Disabling unused clock "mcspi_fck" Disabling unused clock "mcspi_fck" Disabling unused clock "mcspi_fck" Disabling unused clock "mcspi_fck" Disabling unused clock "mcbsp_fck" Disabling unused clock "mcbsp_fck" Disabling unused clock "i2c_fck" Disabling unused clock "mspro_fck" Disabling unused clock "gpt11_fck" Disabling unused clock "gpt10_fck" Disabling unused clock "dpll4_m6x2_ck" Disabling unused clock "dpll4_m3x2_ck" Disabling unused clock "dpll3_m3x2_ck" Disabling unused clock "sys_clkout1" VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1twl4030_rtc twl4030_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
Waiting for root device /dev/mmcblk0p2... mmc0: new high speed SDHC card at address 8fe4 mmcblk0: mmc0:8fe4 SD08G 7.40 GiB mmcblk0: p1 p2 p3EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on mmcblk0p2, internal journal EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem). Freeing init memory: 188K INIT: version 2.86 bootingv/rules.d: time stamp 2009-01-13 21:05:30 is 285195917.614868154 s in the future
udevd[596]: lookup_group: specified group 'scanner' unknown udevd[596]: lookup_group: specified group 'scanner' unknown udevd[596]: lookup_group: specified group 'scanner' unknown udevd[596]: lookup_group: specified group 'scanner' unknown udevd[596]: lookup_group: specified group 'nvram' unknown udevd[596]: lookup_user: specified user 'tss' unknown udevd[596]: lookup_group: specified group 'tss' unknown udevd[596]: lookup_group: specified group 'fuse' unknown udevd[596]: lookup_group: specified group 'kvm' unknown udevd[596]: lookup_group: specified group 'rdma' unknown udevd[596]: lookup_group: specified group 'rdma' unknown udevd[596]: lookup_group: specified group 'rdma' unknownAdding 160640k swap on /dev/mmcblk0p3. Priority:-1 extents:1 across: 160640k
Remounting root file system... uncorrectable error : <3>end_request: I/O error, dev mtdblock0, sector 0 Buffer I/O error on device mtdblock0, logical block 0 end_request: I/O error, dev mtdblock0, sector 8 Buffer I/O error on device mtdblock0, logical block 1uncorrectable error : <3>end_request: I/O error, dev mtdblock0, sector 16
Buffer I/O error on device mtdblock0, logical block 2uncorrectable error : <3>uncorrectable error : <3>end_request: I/O error, dev mtdblock0, sector 24
Buffer I/O error on device mtdblock0, logical block 3 uncorrectable error : <3>end_request: I/O error, dev mtdblock0, sector 0 Buffer I/O error on device mtdblock0, logical block 0WARNING: Couldn't open directory /lib/modules/2.6.28-omap1: No such file or directory FATAL: Could not open /lib/modules/2.6.28-omap1/modules.dep.temp for writing: No such file or directory modprobe: FATAL: Could not load /lib/modules/2.6.28-omap1/modules.dep: No such file or directory
Setting up IP spoofing protection: rp_filter.Configuring network interfaces... modprobe: FATAL: Could not load /lib/ modules/2.6.28-omap1/modules.dep: No such file or directory
eth0: unknown interface: No such devicemodprobe: FATAL: Could not load /lib/modules/2.6.28-omap1/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.28-omap1/modules.dep: No such file or directory
eth0 No such devicemodprobe: FATAL: Could not load /lib/modules/2.6.28-omap1/modules.dep: No such file or directory
udhcpc: SIOCGIFINDEX: No such device done. Tue Jan 13 21:06:00 GMT 2009 INIT: Entering runlevel: 5 Configuring leds: beagleboard::pmu_st: none beagleboard::usr0: heartbeat beagleboard::usr1: mmc0 ALSA: Restoring mixer settings...modprobe: FATAL: Could not load /lib/modules/2.6.28-omap1/modules.dep: No such file or directory
dropbear. (failed.) [ ok ]Running ntpdate to synchronize clockError : Temporary failure in name resolution
.
.-------.
| | .-.
| | |-----.-----.-----.| | .----..-----.-----.
| | | __ | ---'| '--.| .-'| | |
| | | | | |--- || --'| | | ' | | | |
'---'---'--'--'--. |-----''----''--' '-----'-'-'-'
-' |
'---'
The Angstrom Distribution beagleboard ttyS2
Angstrom 2009.X-test-20090102 beagleboard ttyS2
beagleboard login: root
root@beagleboard:~# ls /deroot@beagleboard:~# ls /dev/fb
root@beagleboard:~# ls /dev/full root@beagleboard:~# ls /dev/full pm-
kernel
root@beagleboard:~# find /syroot@beagleboard:~# find /sys/| grep CPUroot@beagleboard:~# root@beagleboard:~# find /sys/| grep CPU pcu cpu
/sys/devices/system/cpu /sys/devices/system/cpu/online /sys/devices/system/cpu/possible /sys/devices/system/cpu/present /sys/devices/system/cpu/cpuidle /sys/devices/system/cpu/cpuidle/current_driver /sys/devices/system/cpu/cpuidle/current_governor_ro /sys/devices/system/cpu/cpu0 /sys/devices/system/cpu/cpu0/crash_notes /sys/devices/system/cpu/cpu0/cpuidle /sys/devices/system/cpu/cpu0/cpuidle/state0 /sys/devices/system/cpu/cpu0/cpuidle/state0/name /sys/devices/system/cpu/cpu0/cpuidle/state0/desc /sys/devices/system/cpu/cpu0/cpuidle/state0/latency /sys/devices/system/cpu/cpu0/cpuidle/state0/power /sys/devices/system/cpu/cpu0/cpuidle/state0/usage /sys/devices/system/cpu/cpu0/cpuidle/state0/time /sys/devices/system/cpu/cpu0/cpuidle/state1 /sys/devices/system/cpu/cpu0/cpuidle/state1/name /sys/devices/system/cpu/cpu0/cpuidle/state1/desc /sys/devices/system/cpu/cpu0/cpuidle/state1/latency /sys/devices/system/cpu/cpu0/cpuidle/state1/power /sys/devices/system/cpu/cpu0/cpuidle/state1/usage /sys/devices/system/cpu/cpu0/cpuidle/state1/time /sys/devices/system/cpu/cpu0/cpuidle/state2 /sys/devices/system/cpu/cpu0/cpuidle/state2/name /sys/devices/system/cpu/cpu0/cpuidle/state2/desc /sys/devices/system/cpu/cpu0/cpuidle/state2/latency /sys/devices/system/cpu/cpu0/cpuidle/state2/power /sys/devices/system/cpu/cpu0/cpuidle/state2/usage /sys/devices/system/cpu/cpu0/cpuidle/state2/time /sys/devices/system/cpu/cpu0/cpuidle/state3 /sys/devices/system/cpu/cpu0/cpuidle/state3/name /sys/devices/system/cpu/cpu0/cpuidle/state3/desc /sys/devices/system/cpu/cpu0/cpuidle/state3/latency /sys/devices/system/cpu/cpu0/cpuidle/state3/power /sys/devices/system/cpu/cpu0/cpuidle/state3/usage /sys/devices/system/cpu/cpu0/cpuidle/state3/time /sys/devices/system/cpu/cpu0/cpuidle/state4 /sys/devices/system/cpu/cpu0/cpuidle/state4/name /sys/devices/system/cpu/cpu0/cpuidle/state4/desc /sys/devices/system/cpu/cpu0/cpuidle/state4/latency /sys/devices/system/cpu/cpu0/cpuidle/state4/power /sys/devices/system/cpu/cpu0/cpuidle/state4/usage /sys/devices/system/cpu/cpu0/cpuidle/state4/time /sys/devices/system/cpu/cpu0/cpuidle/state5 /sys/devices/system/cpu/cpu0/cpuidle/state5/name /sys/devices/system/cpu/cpu0/cpuidle/state5/desc /sys/devices/system/cpu/cpu0/cpuidle/state5/latency /sys/devices/system/cpu/cpu0/cpuidle/state5/power /sys/devices/system/cpu/cpu0/cpuidle/state5/usage /sys/devices/system/cpu/cpu0/cpuidle/state5/time /sys/class/misc/cpu_dma_latency /sys/class/misc/cpu_dma_latency/uevent /sys/class/misc/cpu_dma_latency/dev /sys/class/misc/cpu_dma_latency/subsystem /sys/class/misc/cpu_dma_latency/power /sys/class/misc/cpu_dma_latency/power/wakeup /sys/kernel/uids/0/cpu_share /sys/kernel/uids/1/cpu_share /sys/kernel/uids/46/cpu_share /sys/kernel/uids/47/cpu_share /sys/kernel/uids/42/cpu_share /sys/module/cpufreq /sys/module/cpufreq/parameters /sys/module/cpufreq/parameters/debug_ratelimit /sys/module/cpufreq/parameters/debug root@beagleboard:~# ls /sys/devices/system/cpu/cpu0/ cpuidle crash_notesroot@beagleboard:~# cd /meroot@beagleboard:~# cd /media/ mmroot@beagleboard:~# cd /media/mmcbroot@beagleboard:~# cd /media/ mmcblk0p1root@beagleboard:~# cd /media/mmcblk0p1/
root@beagleboard:/media/mmcblk0p1# ls broken picodlp-control_0.1-r1.1_armv7a.ipk uImage working mlo u-boot.bin untestedroot@beagleboard:/media/mmcblk0p1# cp woroot@beagleboard:/media/ mmcblk0p1# cp working/uI 2root@beagleboard:/media/mmcblk0p1# cp working/2.6.2
working/2.6.26 working/2.6.28-ehci working/2.6.27 working/2.6.28rc7 root@beagleboard:/media/mmcblk0p1# cp working/2.6.2 working/2.6.26 working/2.6.28-ehci working/2.6.27 working/2.6.28rc7root@beagleboard:/media/mmcblk0p1# cp working/2.6.28- eroot@beagleboard:/media/mmcblk0p1# cp working/2.6.28-ehci uIroot@beagleboard:/media/mmcblk0p1# cp working/2.6.28-ehci uImage ; sync ; rebootred new interface driver cdc_ether
usbcore: registered new interface driver rndis_host usbcore: registered new interface driver zd1211rw usbcore: registered new interface driver rndis_wlan usbcore: registered new interface driver zd1201 usbcore: registered new interface driver usb8xxx usbcore: registered new interface driver rtl8187 usbcore: registered new interface driver rt2500usb usbcore: registered new interface driver rt73usb usbcore: registered new interface driver p54usb i2c /dev entries driver input: triton2-pwrbutton as /class/input/input0 triton2 power button driver initialized Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods omap2-nand driver initializingNAND device: Manufacturer ID: 0x2c, Chip ID: 0xba (Micron NAND 256MiB 1,8V 16-bit)
cmdlinepart partition parsing not available Creating 5 MTD partitions on "omap2-nand": 0x00000000-0x00080000 : "X-Loader" 0x00080000-0x00260000 : "U-Boot" 0x00260000-0x00280000 : "U-Boot Env" 0x00280000-0x00680000 : "Kernel" 0x00680000-0x10000000 : "File System" ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-omap ehci-omap.0: OMAP-EHCI Host Controller ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1 ehci-omap ehci-omap.0: irq 77, io mem 0x48064800 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. mice: PS/2 mouse device common for all mice input: gpio-keys as /class/input/input1 twl4030_rtc twl4030_rtc: rtc core: registered twl4030_rtc as rtc0 OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec Bluetooth: HCI USB driver ver 2.10 usbcore: registered new interface driver hci_usb Bluetooth: Broadcom Blutonium firmware driver ver 1.2 usbcore: registered new interface driver bcm203x Bluetooth: Digianswer Bluetooth USB driver ver 0.10 usbcore: registered new interface driver bpa10x Bluetooth: Generic Bluetooth SDIO driver ver 0.1 mmci-omap-hs mmci-omap-hs.0: Failed to get debounce clock Registered led device: beagleboard::usr0 Registered led device: beagleboard::usr1 leds-gpio: probe of leds-gpio failed with error -22 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.18rc3. usbcore: registered new interface driver snd-usb-audio ASoC version 0.13.2 OMAP3 Beagle SoC init TWL4030 Audio Codec init asoc: twl4030 <-> omap-mcbsp-dai-(link_id) mapping ok ALSA device list: #0: omap3beagle (twl4030) oprofile: using arm/armv7 TCP cubic registered NET: Registered protocol family 17 NET: Registered protocol family 15 Bluetooth: L2CAP ver 2.11 Bluetooth: L2CAP socket layer initialized Bluetooth: SCO (Voice Link) ver 0.6 Bluetooth: SCO socket layer initialized usb 1-2: new high speed USB device using ehci-omap and address 2 Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.10 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bluetooth: HIDP (Human Interface Emulation) ver 1.2 RPC: Registered udp transport module. RPC: Registered tcp transport module. ieee80211: 802.11 data/management/control stack, git-1.1.13ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@xxxxxxxxxxxxxxx >
ieee80211_crypt: registered algorithm 'NULL' ieee80211_crypt: registered algorithm 'WEP' ieee80211_crypt: registered algorithm 'CCMP' ieee80211_crypt: registered algorithm 'TKIP' ThumbEE CPU extension supported. Power Management for TI OMAP3. SmartReflex driver initialized Disabling unused clock "sr2_fck" Disabling unused clock "sr1_fck" Disabling unused clock "mcbsp_fck" Disabling unused clock "mcbsp_fck" Disabling unused clock "mcbsp_fck" Disabling unused clock "mcbsp_ick" Disabling unused clock "mcbsp_ick" Disabling unused clock "mcbsp_ick" Disabling unused clock "gpt2_ick" Disabling unused clock "gpt3_ick" Disabling unused clock "gpt4_ick" Disabling unused clock "gpt5_ick" Disabling unused clock "gpt6_ick" Disabling unused clock "gpt7_ick" Disabling unused clock "gpt8_ick" Disabling unused clock "gpt9_ick" Disabling unused clock "wdt3_ick" Disabling unused clock "wdt3_fck" Disabling unused clock "gpio2_dbck" Disabling unused clock "gpio3_dbck" Disabling unused clock "gpio4_dbck" Disabling unused clock "gpio5_dbck" Disabling unused clock "gpio6_dbck" Disabling unused clock "gpt9_fck" Disabling unused clock "gpt8_fck" Disabling unused clock "gpt7_fck" Disabling unused clock "gpt6_fck" Disabling unused clock "gpt5_fck" Disabling unused clock "gpt4_fck" Disabling unused clock "gpt3_fck" Disabling unused clock "gpt2_fck" Disabling unused clock "gpt1_ick" Disabling unused clock "wdt1_ick" Disabling unused clock "wdt2_ick" Disabling unused clock "wdt2_fck" Disabling unused clock "gpio1_dbck" Disabling unused clock "gpt1_fck" Disabling unused clock "cam_ick" Disabling unused clock "cam_mclk" Disabling unused clock "des1_ick" Disabling unused clock "sha11_ick" Disabling unused clock "rng_ick" Disabling unused clock "aes1_ick" Disabling unused clock "ssi_ick" Disabling unused clock "mailboxes_ick" Disabling unused clock "mcbsp_ick" Disabling unused clock "mcbsp_ick" Disabling unused clock "gpt10_ick" Disabling unused clock "gpt11_ick" Disabling unused clock "i2c_ick" Disabling unused clock "mcspi_ick" Disabling unused clock "mcspi_ick" Disabling unused clock "mcspi_ick" Disabling unused clock "mcspi_ick" Disabling unused clock "hdq_ick" Disabling unused clock "mspro_ick" Disabling unused clock "des2_ick" Disabling unused clock "sha12_ick" Disabling unused clock "aes2_ick" Disabling unused clock "icr_ick" Disabling unused clock "pka_ick" Disabling unused clock "ssi_ssr_fck" Disabling unused clock "hdq_fck" Disabling unused clock "mcspi_fck" Disabling unused clock "mcspi_fck" Disabling unused clock "mcspi_fck" Disabling unused clock "mcspi_fck" Disabling unused clock "mcbsp_fck" Disabling unused clock "mcbsp_fck" Disabling unused clock "i2c_fck" Disabling unused clock "mspro_fck" Disabling unused clock "gpt11_fck" Disabling unused clock "gpt10_fck" Disabling unused clock "iva2_ck" Disabling unused clock "dpll4_m6x2_ck" Disabling unused clock "dpll4_m5x2_ck" Disabling unused clock "dpll3_m3x2_ck" Disabling unused clock "sys_clkout1" VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1 OMAPFB: omapfb_init OMAPFB: omapfb_probe OMAPFB: create 3 framebuffers OMAPFB: fb_infos allocated param '4M' param '4M' OMAPFB: allocating 4194304 bytes for fb 0 OMAPFB: allocated VRAM paddr 80750000, vaddr d1000000 OMAPFB: allocating 4194304 bytes for fb 1 OMAPFB: allocated VRAM paddr 80b50000, vaddr d1400000 OMAPFB: region0 phys 80750000 virt d1000000 size=4194304 OMAPFB: region1 phys 80b50000 virt d1400000 size=4194304 OMAPFB: region2 phys 00000000 virt 00000000 size=0 OMAPFB: fbmems allocated OMAPFB: check_fb_var 0 OMAPFB: xres = 640, yres = 480, vxres = 640, vyres = 480 OMAPFB: set_fb_fix OMAPFB: check_fb_var 1 OMAPFB: xres = 640, yres = 480, vxres = 640, vyres = 480 OMAPFB: set_fb_fix OMAPFB: check_fb_var 2 OMAPFB: set_fb_fix OMAPFB: fb_infos initialized OMAPFB: set_par(0) OMAPFB: set_fb_fix OMAPFB: apply_changes, fb 0, ovl 0 OMAPFB: setup_overlay 0 omap-dss DISPLAY: omap_dss_mgr_apply(lcd) omap-dss DISPC: dispc_enable_plane 0, 0 omap-dss DISPC: dispc_enable_plane 1, 0 omap-dss DISPC: dispc_enable_plane 2, 0 omap-dss DSS: save context OMAPFB: pan_display(0) OMAPFB: setcmap OMAPFB: setcmap Console: switching to colour frame buffer device 80x30 OMAPFB: pan_display(0) OMAPFB: setcmap OMAPFB: setcmap OMAPFB: framebuffers registered OMAPFB: apply_changes, fb 0, ovl 0 OMAPFB: setup_overlay 0 OMAPFB: apply_changes, fb 1, ovl 1 OMAPFB: setup_overlay 1 OMAPFB: apply_changes, fb 2, ovl 2 OMAPFB: create_framebuffers done omap-dss DISPLAY: omap_dss_mgr_apply(lcd)omap-dss DISPC: dispc_setup_plane 0, 80750000, sw 640, 0,0, 640x480 -> 640x480, (ilace 0)
omap-dss DISPC: dispc_enable_plane 0, 1 omap-dss DISPC: dispc_enable_plane 1, 0 omap-dss DISPC: dispc_enable_plane 2, 0 omap-dss DSS: save context omap-dss DISPLAY: omap_dss_mgr_apply(tv) omap-dss DSS: save context omap-dss DISPLAY: omap_dss_mgr_apply_l4(l4) OMAPFB: mgr->apply'ed omap-dss DSI: PLL init omap-dss DISPC: dpll4_m4 = 432000000 omap-dss DISPC: fck = 96000000 (9) omap-dss DISPC: lck = 96000000 (1) omap-dss DISPC: pck = 48000000 (2) clock: new_div = 9, new_rate = 48000000 omap-dss DSI: PLL init done omap-dss DISPC: fifo(0) size 1024, low/high old 960/1023, new 256/960 omap-dss DISPC: fifo(1) size 1024, low/high old 960/1023, new 256/960 omap-dss DISPC: fifo(2) size 1024, low/high old 960/1023, new 256/960 omap-dss DISPC: onoff 0 rf 0 ieo 0 ipc 0 ihs 0 ivs 0 acbi 0 acb 0 omap-dss DSI: dsi_pll_calc omap-dss DSI: dsi_pll_program omap-dss DSI: DSI Fint 1857142 omap-dss DSI: clkin (dss2_fck) rate 13000000, highfreq 0 omap-dss DSI: DSIPHY = 2 * 329 / 7 * 13000000 / 1 = 1222000000 omap-dss DSI: Data rate on 1 DSI lane 611 Mbps omap-dss DSI: Clock lane freq 305500000 Hz omap-dss DSI: regm3 = 13, dsi1_pll_fclk = 94000000 omap-dss DSI: regm4 = 16, dsi2_pll_fclk = 76375000 omap-dss DSI: PLL config done omap-dss DISPC: xres 640 yres 480 omap-dss DISPC: pck 23500 omap-dss DISPC: hsw 32 hfp 48 hbp 80 vsw 4 vfp 3 vbp 7 omap-dss DISPC: hsync 29375Hz, vsync 59Hz OMAPFB: display->updated DISPC IRQ: 0x4024: SYNC_LOST omap-dss DISPC error: dispc irq error status 4024 DISPC IRQ: 0x4000: SYNC_LOST omap-dss DISPC error: dispc irq error status 4000 DISPC IRQ: 0x4000: SYNC_LOST omap-dss DISPC error: dispc irq error status 4000 DISPC IRQ: 0x4022: SYNC_LOST omap-dss DISPC error: dispc irq error status 4022 DISPC IRQ: 0x4000: SYNC_LOST omap-dss DISPC error: dispc irq error status 4000 DISPC IRQ: 0x4022: SYNC_LOST omap-dss DISPC error: dispc irq error status 4022 DISPC IRQ: 0x4000: SYNC_LOST omap-dss DISPC error: dispc irq error status 4000 DISPC IRQ: 0x4022: SYNC_LOST omap-dss DISPC error: dispc irq error status 4022 DISPC IRQ: 0x4000: SYNC_LOST omap-dss DISPC error: dispc irq error status 4000 DISPC IRQ: 0x4002: SYNC_LOST omap-dss DISPC error: dispc irq error status 4002 DISPC IRQ: 0x4020: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4022: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4022: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4022: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4022: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST OMAPFB: sysfs created DISPC IRQ: 0x4022: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4022: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4022: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4022: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4022: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4022: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4022: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4022: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4022: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4022: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4022: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST DISPC IRQ: 0x4000: SYNC_LOST omap-dss DISPC error: Excessive DISPC errors Turning off lcd and digit DISPC IRQ: 0x4022: SYNC_LOST omap-dss DISPC error: Excessive DISPC errors Turning off lcd and digit DISPC IRQ: 0x4000: SYNC_LOST omap-dss DISPC error: Excessive DISPC errors Turning off lcd and digit DISPC IRQ: 0x4003: SYNC_LOST omap-dss DISPC error: Excessive DISPC errors Turning off lcd and digit usb 1-2: configuration #1 chosen from 1 choicetwl4030_rtc twl4030_rtc: setting system clock to 2009-01-13 21:11:13 UTC (1231881073)
hub 1-2:1.0: USB hub found hub 1-2:1.0: 4 ports detected mmc0: new SDHC card at address 8fe4 mmcblk0: mmc0:8fe4 SD08G 7.40 GiB mmcblk0: p1 p2 p3EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on mmcblk0p2, internal journal EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem). Freeing init memory: 188KIf you have read till down here: still no cpufreq while the board file has the rate tables and the initcall:
--- /tmp/board-omap3beagle.c 2009-01-12 15:46:26.000000000 +0100+++ git/arch/arm/mach-omap2/board-omap3beagle.c 2009-01-12 15:46:28.000000000 +0100
@@ -41,14 +41,73 @@
#include <mach/usb-ehci.h>
#include <mach/common.h>
#include <mach/gpmc.h>
+#include <mach/omap-pm.h>
#include <mach/nand.h>
#include <mach/mux.h>
#include <mach/omapfb.h>
#include <mach/display.h>
+#include <mach/clock.h>
+
#include "twl4030-generic-scripts.h"
#include "mmc-twl4030.h"
+#include "pm.h"
+
+/* MPU speeds */
+#define S600M 600000000
+#define S550M 550000000
+#define S500M 500000000
+#define S250M 250000000
+#define S125M 125000000
+
+/* DSP speeds */
+#define S430M 430000000
+#define S400M 400000000
+#define S360M 360000000
+#define S180M 180000000
+#define S90M 90000000
+
+/* L3 speeds */
+#define S83M 83000000
+#define S166M 166000000
+
+static struct omap_opp mpu_rate_table[] = {
+ {0, 0, 0},
+ /*OPP1*/
+ {S125M, VDD1_OPP1, 0x18},
+ /*OPP2*/
+ {S250M, VDD1_OPP2, 0x20},
+ /*OPP3*/
+ {S500M, VDD1_OPP3, 0x30},
+ /*OPP4*/
+ {S550M, VDD1_OPP4, 0x36},
+ /*OPP5*/
+ {S600M, VDD1_OPP5, 0x3C},
+};
+static struct omap_opp l3_rate_table[] = {
+ {0, 0, 0},
+ /*OPP1*/
+ {0, VDD2_OPP1, 0x18},
+ /*OPP2*/
+ {S83M, VDD2_OPP2, 0x20},
+ /*OPP3*/
+ {S166M, VDD2_OPP3, 0x2C},
+};
+
+struct omap_opp dsp_rate_table[] = {
+ {0, 0, 0},
+ /*OPP1*/
+ {S90M, VDD1_OPP1, 0x18},
+ /*OPP2*/
+ {S180M, VDD1_OPP2, 0x20},
+ /*OPP3*/
+ {S360M, VDD1_OPP3, 0x30},
+ /*OPP4*/
+ {S400M, VDD1_OPP4, 0x36},
+ /*OPP5*/
+ {S430M, VDD1_OPP5, 0x3C},
+};
#define GPMC_CS0_BASE 0x60
#define GPMC_CS_SIZE 0x30
@@ -227,7 +294,8 @@
static void __init omap3_beagle_init_irq(void)
{
- omap2_init_common_hw(mt46h32m32lf6_sdrc_params, NULL, NULL, NULL);
+ omap2_init_common_hw(mt46h32m32lf6_sdrc_params, mpu_rate_table,
+ dsp_rate_table, l3_rate_table);
omap_init_irq();
omap_gpio_init();
}
regards,
KoenAttachment:
PGP.sig
Description: Dit deel van het bericht is digitaal ondertekend
