Sanjeev Premi <premi@xxxxxx> writes: > These patches provide support for the OMAP35x processors. > > This is essentially a re-submit after series of discusions > earlier in the list. It had always been getting pushed in > my to-do list :( > See: http://marc.info/?l=linux-omap&m=122029900603111&w=2 > > Based on the comments received, this patch includes following: > 1) Updates to Kconfig > (Includes the changes suggested by Aguirre Rodriguez) > 2) Runtime check for OMAP35x > 3) Updates to omap3_evm_defconfig > > If the changes look good, I can make updates to Beagle, > Overo and Pandora boards as well. > > Best regards, > Sanjeev Sanjeev, Is the HEAD of linux-omap working for you on omap3evm? I just got my EVM and am getting it going but it doesn't boot without CONFIG_DEBUG_LL, and with that enabled, as soon as the normal serial driver is enabled, the serial console goes crazy with garbage output. I'm about to push a new PM branch and wanted to do some testing on the EVM. Kevin > Sanjeev Premi (3): > Add support for OMAP35x processors > Runitme check for OMAP35x > Updates for OMAP3EVM > > arch/arm/configs/omap3_evm_defconfig | 5 ++ > arch/arm/mach-omap2/Kconfig | 65 ++++++++++++++++++++-- > arch/arm/mach-omap2/board-omap3evm.c | 2 +- > arch/arm/plat-omap/common.c | 68 +++++++++++++++++++++++ > arch/arm/plat-omap/include/mach/common.h | 1 + > arch/arm/plat-omap/include/mach/cpu.h | 88 +++++++++++++++++++++++++++++- > 6 files changed, 220 insertions(+), 9 deletions(-) > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html