Re: [PATCH] usb: musb: adding nop usb transceiver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Thu, Jan 08, 2009 at 04:23:08PM +0530, Ajay Kumar Gupta wrote:
> NOP transceiver is used by all the usb transceiver which are mostly
> autonomous and doesn't require any programming or which are built
> into the usb ip itself.NOP transceiver only allocates the memory
> for struct xceiv and calls otg_set_transceiver() so function call
> to otg_get_transceiver() will return a valid ransceiver.
> 
> NOP transceiver device is required to be registered using
> platform_device_register() in platform files.

Dave, do you have any complains with this driver ? I think we can use it
as is and queue it via Greg ?

Tony, if Dave is ok, we should apply to l-o together with the other
patch I'll ack soon.

> Signed-off-by: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
> ---
>  drivers/usb/otg/Kconfig         |    8 ++
>  drivers/usb/otg/Makefile        |    1 +
>  drivers/usb/otg/nop-usb-xceiv.c |  139 +++++++++++++++++++++++++++++++++++++++
>  3 files changed, 148 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/usb/otg/nop-usb-xceiv.c
> 
> diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
> index b1cf38b..7f14d8e 100644
> --- a/drivers/usb/otg/Kconfig
> +++ b/drivers/usb/otg/Kconfig
> @@ -51,4 +51,12 @@ config TWL4030_USB
>  	  This is transceiver supports high and full speed devices
>  	  plus, in host mode, low speed.
>  
> +config NOP_USB_XCEIV
> +	tristate "NOP USB Transceiver Driver"
> +	select USB_OTG_UTILS
> +	help
> +	 this driver is to be used by all the usb transceiver which are either
> +	 built-in with usb ip or which are autonomous and doesn't require any
> +	 phy programming such as ISP1x04 etc.
> +
>  endif # USB || OTG
> diff --git a/drivers/usb/otg/Makefile b/drivers/usb/otg/Makefile
> index d73c7cf..2081678 100644
> --- a/drivers/usb/otg/Makefile
> +++ b/drivers/usb/otg/Makefile
> @@ -9,6 +9,7 @@ obj-$(CONFIG_USB_OTG_UTILS)	+= otg.o
>  obj-$(CONFIG_USB_GPIO_VBUS)	+= gpio_vbus.o
>  obj-$(CONFIG_ISP1301_OMAP)	+= isp1301_omap.o
>  obj-$(CONFIG_TWL4030_USB)	+= twl4030-usb.o
> +obj-$(CONFIG_NOP_USB_XCEIV)	+= nop-usb-xceiv.o
>  
>  ccflags-$(CONFIG_USB_DEBUG)	+= -DDEBUG
>  ccflags-$(CONFIG_USB_GADGET_DEBUG) += -DDEBUG
> diff --git a/drivers/usb/otg/nop-usb-xceiv.c b/drivers/usb/otg/nop-usb-xceiv.c
> new file mode 100644
> index 0000000..2dcf873
> --- /dev/null
> +++ b/drivers/usb/otg/nop-usb-xceiv.c
> @@ -0,0 +1,139 @@
> +/*
> + * drivers/usb/otg/nop-usb-xceiv.c
> + *
> + * NOP USB transceiver for all USB transceiver which are either built-in
> + * into USB IP or which are mostly autonomous.
> + *
> + * Copyright (C) 2009 Texas Instruments Inc
> + * Author: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> + *
> + * Current status:
> + * 	this is to add "nop" transceiver for all those phy which is
> + * 	autonomous such as isp1504 etc.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/usb/otg.h>
> +
> +struct nop_usb_xceiv {
> +	struct otg_transceiver	otg;
> +	struct device		*dev;
> +};
> +
> +/* internal define on top of container_of */
> +#define xceiv_to_nop(x)		container_of((x), struct nop_usb_xceiv, otg);
> +
> +static int nop_set_suspend(struct otg_transceiver *x, int suspend)
> +{
> +	return 0;
> +}
> +
> +static int nop_set_peripheral(struct otg_transceiver *x,
> +		struct usb_gadget *gadget)
> +{
> +	struct nop_usb_xceiv *nop;
> +
> +	if (!x)
> +		return -ENODEV;
> +
> +	nop = xceiv_to_nop(x);
> +
> +	if (!gadget) {
> +		nop->otg.gadget = NULL;
> +		return -ENODEV;
> +	}
> +
> +	nop->otg.gadget = gadget;
> +	nop->otg.state = OTG_STATE_B_IDLE;
> +	return 0;
> +}
> +
> +static int nop_set_host(struct otg_transceiver *x, struct usb_bus *host)
> +{
> +	struct nop_usb_xceiv *nop;
> +
> +	if (!x)
> +		return -ENODEV;
> +
> +	nop = xceiv_to_nop(x);
> +
> +	if (!host) {
> +		nop->otg.host = NULL;
> +		return -ENODEV;
> +	}
> +
> +	nop->otg.host = host;
> +	return 0;
> +}
> +
> +static int __init nop_usb_xceiv_probe(struct platform_device *pdev)
> +{
> +	struct nop_usb_xceiv	*nop;
> +
> +	nop = kzalloc(sizeof *nop, GFP_KERNEL);
> +	if (!nop)
> +		return -ENOMEM;
> +
> +	nop->dev		= &pdev->dev;
> +	nop->otg.dev		= nop->dev;
> +	nop->otg.label		= "nop-xceiv";
> +	nop->otg.set_host	= nop_set_host;
> +	nop->otg.set_peripheral	= nop_set_peripheral;
> +	nop->otg.set_suspend	= nop_set_suspend;
> +
> +	otg_set_transceiver(&nop->otg);
> +
> +	platform_set_drvdata(pdev, nop);
> +
> +	dev_info(&pdev->dev, "Initialized NOP USB Transceiver\n");
> +	return 0;
> +}
> +
> +static int __exit nop_usb_xceiv_remove(struct platform_device *pdev)
> +{
> +	struct nop_usb_xceiv *nop = platform_get_drvdata(pdev);
> +
> +	kfree(nop);
> +	return 0;
> +}
> +
> +static struct platform_driver nop_usb_xceiv_driver = {
> +	.probe		= nop_usb_xceiv_probe,
> +	.remove		= __exit_p(nop_usb_xceiv_remove),
> +	.driver		= {
> +		.name	= "nop_usb_xceiv",
> +		.owner	= THIS_MODULE,
> +	},
> +};
> +
> +static int __init nop_usb_xceiv_init(void)
> +{
> +	return platform_driver_register(&nop_usb_xceiv_driver);
> +}
> +subsys_initcall(nop_usb_xceiv_init);
> +
> +static void __exit nop_usb_xceiv_exit(void)
> +{
> +	platform_driver_unregister(&nop_usb_xceiv_driver);
> +}
> +module_exit(nop_usb_xceiv_exit);
> +
> +MODULE_ALIAS("platform:nop_usb_xceiv");
> +MODULE_AUTHOR("Texas Instruments Inc");
> +MODULE_DESCRIPTION("NOP USB Transceiver driver");
> +MODULE_LICENSE("GPL");
> -- 
> 1.5.6
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

-- 
balbi
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux