Hi, > -----Original Message----- > From: linux-omap-owner@xxxxxxxxxxxxxxx [mailto:linux-omap- > owner@xxxxxxxxxxxxxxx] On Behalf Of Premi, Sanjeev > Sent: Friday, January 09, 2009 9:02 AM > To: linux-omap@xxxxxxxxxxxxxxx > Cc: Premi, Sanjeev > Subject: [PATCH 0/3] Add support for OMAP35x processors > > These patches provide support for the OMAP35x processors. > > This is essentially a re-submit after series of discusions > earlier in the list. It had always been getting pushed in > my to-do list :( > See: http://marc.info/?l=linux-omap&m=122029900603111&w=2 > > Based on the comments received, this patch includes following: > 1) Updates to Kconfig > 2) Runtime check for OMAP35x > 3) Updates to omap3_evm_defconfig > > If the changes look good, I can make updates to Beagle, > Overo and Pandora boards as well. > > Best regards, > Sanjeev > > Sanjeev Premi (3): > Add support for OMAP35x processors > Runitme check for OMAP35x > Updates for OMAP3EVM > > arch/arm/configs/omap3_evm_defconfig | 5 ++ > arch/arm/mach-omap2/Kconfig | 54 +++++++++++++++++- > arch/arm/mach-omap2/board-omap3evm.c | 2 +- > arch/arm/plat-omap/common.c | 68 +++++++++++++++++++++++ > arch/arm/plat-omap/include/mach/common.h | 1 + > arch/arm/plat-omap/include/mach/cpu.h | 88 > +++++++++++++++++++++++++++++- > 6 files changed, 212 insertions(+), 6 deletions(-) > > From 2be5d86821dd72c90eca438dbc5a1aa7237a9ebe Mon Sep 17 00:00:00 2001 > From: Sanjeev Premi <premi@xxxxxx> > Date: Fri, 9 Jan 2009 20:01:10 +0530 > Subject: [PATCH 1/3] Add support for OMAP35x processors > > This patch adds basic support for the OMAP35x Applications Processors. > (See: http://focus.ti.com/general/docs/gencontent.tsp?contentId=46725) > - OMAP3503 > - OMAP3515 > - OMAP3525 > - OMAP3530 > > Signed-off-by: Sanjeev Premi <premi@xxxxxx> > --- > arch/arm/mach-omap2/Kconfig | 54 > ++++++++++++++++++++++++++++++++++++++++-- > 1 files changed, 51 insertions(+), 3 deletions(-) > > diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig > index 0a86a88..1b77b63 100644 > --- a/arch/arm/mach-omap2/Kconfig > +++ b/arch/arm/mach-omap2/Kconfig > @@ -28,6 +28,54 @@ config ARCH_OMAP3430 > select ARCH_OMAP_OTG > select CPU_V7 > > +config ARCH_OMAP35XX > + bool "OMAP35x Family" > + select ARCH_OMAP3 > + select ARCH_OMAP34XX > + select ARCH_OMAP3430 > + select OMAP3430_ES2 AFAIK the above select (OMAP3430_ES2) doesn't exist. omap_rev() is used in drivers to check instead. > + select NEON > + help > + OMAP35x family of processors based on ARM Cortex-A8 > + in combination with IVA2.2 core and OpenGL ES2.0 > + compatible graphics engine. > + > + ARM Cortex-A8 contains NEON SIMD coprocessor. > + > +choice > + prompt "Current choice" > + default ARCH_OMAP3503 > + > +config ARCH_OMAP3503 > + bool "OMAP3503" > + depends on ARCH_OMAP35XX > + help > + Contains ARM Cortex-A8 processor. > + > +config ARCH_OMAP3515 > + bool "OMAP3515" > + depends on ARCH_OMAP35XX > + help > + Contains ARM Cortex-A8 processor and SGX530 subsystem > + for 2D and 3D graphics acceleration. > + > +config ARCH_OMAP3525 > + bool "OMAP3525" > + depends on ARCH_OMAP35XX > + help > + Contains ARM Cortex-A8 processor and IVA2.2 subsystem > + with a C64x+ DSP core. > + > +config ARCH_OMAP3530 > + bool "OMAP3530" > + depends on ARCH_OMAP35XX > + help > + Contains ARM Cortex-A8 processor, IVA2.2 subsystem > + with a C64x+ DSP Core and SGX530 subsystem for 2D > + and 3D graphics acceleration. > + > +endchoice > + > comment "OMAP Board Type" > depends on ARCH_OMAP2 || ARCH_OMAP3 > > @@ -107,7 +155,7 @@ config MACH_OMAP_2430SDP > > config MACH_OMAP_LDP > bool "OMAP3 LDP board" > - depends on ARCH_OMAP3 && ARCH_OMAP34XX > + depends on ARCH_OMAP3 && ARCH_OMAP34XX && !ARCH_OMAP35XX > > config MACH_OMAP2EVM > bool "OMAP 2530 EVM board" > @@ -115,11 +163,11 @@ config MACH_OMAP2EVM > > config MACH_OMAP_3430SDP > bool "OMAP 3430 SDP board" > - depends on ARCH_OMAP3 && ARCH_OMAP34XX > + depends on ARCH_OMAP3 && ARCH_OMAP34XX && !ARCH_OMAP35XX > > config MACH_OMAP3EVM > bool "OMAP 3530 EVM board" > - depends on ARCH_OMAP3 && ARCH_OMAP34XX > + depends on ARCH_OMAP35XX > > config MACH_OMAP3_BEAGLE > bool "OMAP3 BEAGLE board" Question to all, Why don't making above options as choice.. endchoice. Or is there any case that multiple boards are compiled at once? Regards, Sergio -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
