We accidentally saw this behavior when saving bootargs like: "setenv bootargs='...'" instead of "setenv bootargs '...'" Try removing '=' Misa > -----Original Message----- > From: linux-omap-owner@xxxxxxxxxxxxxxx [mailto:linux-omap- > owner@xxxxxxxxxxxxxxx] On Behalf Of Sudipta GHOSH > Sent: Saturday, November 22, 2008 1:35 PM > To: linux-omap@xxxxxxxxxxxxxxx > Subject: busybox output to display > > Hi, > > This issue is more with busybox. Hope you will not mind for posting here. > > In my development board, I use uboot as boot loader. busybox files are in > flash. > when I boot , I can see the boot logo (peguin) in the lcd display and > all "printk" output. > > But I am unable to see the busybox in the lcd display. > > busybox prompt and all output from busybox is going to the serial port. > > Like if I do ls, then I see the output of "ls" in my serial port > (teraterm/hyper terminal). > > How I can see busybox prompt and all output to my lcd display. > > > I use console=tty0 in the bootargs. > > any advice? > > > Regards, > -SG > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
