Thanks, Vaibhav Hiremath > -----Original Message----- > From: Koen Kooi [mailto:k.kooi@xxxxxxxxxxxxxxxxxx] > Sent: Saturday, November 15, 2008 2:21 PM > To: Hiremath, Vaibhav > Cc: linux-omap@xxxxxxxxxxxxxxx List > Subject: Re: [REVIEW PATCH] Added OMAP3EVM support on Tomis > FBDEV/DSS Patches > > > Op 15 nov 2008, om 09:45 heeft Hiremath, Vaibhav het volgende > geschreven: > > > > > > > Thanks, > > Vaibhav Hiremath > > > >> -----Original Message----- > >> From: Koen Kooi [mailto:k.kooi@xxxxxxxxxxxxxxxxxx] > >> Sent: Saturday, November 15, 2008 1:14 AM > >> To: Tomi Valkeinen > >> Cc: Hiremath, Vaibhav; linux-fbdev-devel@xxxxxxxxxxxxxxxxxxxxx; > >> linux-omap@xxxxxxxxxxxxxxx > >> Subject: Re: [REVIEW PATCH] Added OMAP3EVM support on Tomis > >> FBDEV/DSS Patches > >> > >> > >> Op 14 nov 2008, om 16:53 heeft Tomi Valkeinen het volgende > >> geschreven: > >> > >>> Hi, > >>> On Fri, 2008-11-14 at 18:05 +0530, ext Hiremath, Vaibhav wrote: > >>> > >>>>> > >>>>> I think the LCD panel on SDP and EVM boards are the same, so > we > >>>>> should > >>>>> only have one driver. Do you have specifications about the > LCD? > >> The > >>>>> manufacturer, model etc?. I didn't find any proper information > >> about > >>>>> the > >>>>> LCD. > >>>>> > >>>> [Hiremath, Vaibhav] The LCD on OMAP3EVM is Sharp LCD (Model No. > - > >>>> LS037V7DW01). > >>>> Koen has already conformed that panel3430sdp.c is working with > >>>> OMAP3EVM, let me try at my end. If it works properly then we > can > >>>> have same file to build for both SDP and EVM. But in that case > it > >>>> make sense to rename file to panel-lcd.c. > >>>> > >>> > >>> I took the liberty to add you EVM changes to my tree, with a > >> comment > >>> about the origin. I also changed the SDP panel name to sharp > >> panel, > >>> and > >>> made both EVM and SDP use that. But I can't test the EVM, as I > >> don't > >>> have one. > >> > >> I finally got rc4 working on evm and with your latest patches I > get: > >> > > [Hiremath, Vaibhav] What was the issue you figured out? > > I figured out which patch to use to fix MMC on evm. > > > >> udevd version 124 started > >> eth0: link down > >> eth0: link up, 100Mbps, full-duplex, lpa 0x8DE1 > >> DSS2 debug: best_ld is 1, best_pd is 3 > >> DSS2 debug: best_ld is 1, best_pd is 3 > >> DSS2 debug: best.lck_div is 1, best.pck_div is 3 > >> omap-dss DISPLAY: omap_dss_mgr_apply(lcd) > >> omap-dss DISPC: dispc_setup_plane 0, 87200000, sw 480, 0,0, > 480x640 > >> -> > >> 480x640, (ilace 0) > >> omap-dss DISPC: dispc_enable_plane 0, 1 > >> omap-dss DISPC: dispc_enable_plane 1, 0 > >> omap-dss DISPC: dispc_enable_plane 2, 0 > >> omap-dss DISPC: GO LCD > >> Division by zero in kernel. > > [Hiremath, Vaibhav] Are you using the patch I submitted or the > > merged code from Tomi? > > I'm using the merged code from Tomi. I extracted the patches from > his > git tree: > http://gitweb.openembedded.net/?p=openembedded.git;a=commit;h=5f7bde > 74179a9eac56e874687f4837d3af759878 > [Hiremath, Vaibhav] Let me have a look at his changes then. > regards, > > Koen -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
