For those who want to experiment with the latest PM branch, it is now
available in OMAP git as branch pm-20081106
The shortlog is below[1], but the significant thing for now is a
rework of how UART handles its clocks and allows idle. I also did
quite a bit of reordering and some restructuring.
I've tested this on Nokia HW and the basic retention-on-idle support
on Beagle. I'm still waiting for my SDP to arrive, so haven't tested
on SDP.
Kevin
[1]
Amit Kucheria (2):
OMAP: PM: Typo fix for clock_allow_idle
HSMMC: Make driver support dynamic idle
Jouni Hogander (5):
OMAP3: PM: Use pwrdm_set_next_pwrst instead of set_pwrdm_state in idle loop
OMAP3: Do not set mpu, core, neon states if cpuidle is used
OMAP3: PM: Do not set next states sw to control those is available
OMAP3: PM: Always return value in pwrdms_setup
OMAP3: PM: Fix wrong sequence in suspend.
Kalle Jokiniemi (3):
OMAP: PM: sysfs interface for enabling voltage off in idle
OMAP3: PM: Fix cpu idle init sequencing
OMAP: SRF: Fixes to shared resource framework (Ver.3)
Kevin Hilman (10):
OMAP3: PM: Add wake-up bit defintiions for CONTROL_PADCONF_X
OMAP3: PM: Allow UARTs to be unclocked when inactive
8250: Allow platform to register PM hook
8250: when waking, PM hook should be called before accessing port
OMAP3: PM: UART: Add 8250 UART PM hook for suspend/resume
OMAP3: PM: UART save/restore support for OFF-mode
OMAP2/3: HSMMC: Ensure HSMMC is fully reset on boot
OMAP3: PM: CPUidle: obey enable_off_mode flag
OMAP3: PM: CPUidle: restrict C-states on UART activity
OMAP3: PM: decouple PER and CORE context save and restore
Paul Walmsley (6):
OMAP2/3 PM: create the OMAP PM interface and add a default OMAP PM no-op layer.
OMAP2/3 omapdev: add basic omapdev structure
OMAP242x omapdev: add OMAP242x omapdev records
OMAP243x omapdev: add OMAP243x omapdev records
OMAP3xxx omapdev: add OMAP3xxx omapdev records
OMAP2/3 omapdev: add code to walk the omapdev records
Peter 'p2' De Schrijver (9):
OMAP: PM counter infrastructure.
OMAP: PM: Hook into PM counters
OMAP: PM: Add closures to clkdm_for_each and pwrdm_for_each.
OMAP: PM: Add pm-debug counters
OMAP: PM debug: make powerdomains use PM-debug counters
OMAP: PM: Add definitions for ETK pads and observability registers
OMAP: Debug observability and ETK padconf implementation
OMAP: Add debug observablity (debobs) Kconfig item
OMAP: PM: Implement get_last_off_on_transaction_id()
Rajendra Nayak (23):
OMAP3: PM: GPMC context save/restore
OMAP3: PM: GPIO context save/restore
OMAP3: PM: I2C context save/restore
OMAP3: PM: INTC context save/restore
OMAP3: PM: PRCM context save/restore
OMAP3: PM: Populate scratchpad contents
OMAP3: PM: SCM context save/restore
OMAP3: PM: SRAM restore function
OMAP3: PM: handle PER/NEON/CORE in idle
OMAP3: PM: Restore MMU table entry
OMAP3: PM: MPU off-mode support
OMAP3: PM: CORE domain off-mode support
OMAP3: PM: allow runtime enable/disable of OFF mode
OMAP3: 3430SDP minimal kernel defconfig
OMAP3: PM: CPUidle: Basic support for C1-C2
OMAP3: PM: CPUidle: Enables state C4
OMAP3: PM: CPUidle: Enables C3 and C5
OMAP3: PM: CPUidle: Safe-state on bm-activity
OMAP3: PM: CPUidle: Enable Kconfig option for OMAP
OMAP3 SRF: Generic shared resource f/w
OMAP3 SRF: MPU/CORE/PD latency modeling
OMAP3 SRF: omap3 srf driver
OMAP3 SRF: OMAP PM srf implementation
Tero Kristo (9):
OMAP: PM debug: do not print out status for meta powerdomains (dpll*)
OMAP: PM debug: Add PRCM register dump support
OMAP: PM: DMA context save / restore
OMAP: PM: off-mode support for DMA on EMU/HS devices
OMAP3: SRAM size fix for HS/EMU devices
OMAP3 PM: off-mode support for HS/EMU devices
OMAP3: PM: Enable SDRAM auto-refresh during sleep
OMAP: SDRC: Add new register definitions for SDRAM controller
OMAP3: PM: SDRC auto-refresh workaround for off-mode
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
