Re: [PATCH 2/3] musb: adding qh in_list and out_list in struct hw_ep

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Oct 30, 2008 at 02:42:51PM +0530, Ajay Kumar Gupta wrote:
> Currently qh list for control, bulkin and bulkout are
> part of musb structure as musb->control, musb->in_bulk
> and musb->out_bulk.This patch makes it generic across
> hw_ep by removing them from musb and mapping them to
> in_list and out_list of hw_ep structure.
> 
> Signed-off-by: Ravi Babu <ravibabu@xxxxxx>
> Signed-off-by: Swaminathan S <swami.iyer@xxxxxx>
> Signed-off-by: Thomas Abraham <t-abraham@xxxxxx>
> Signed-off-by: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
> ---
>  drivers/usb/musb/musb_core.c |    6 +++---
>  drivers/usb/musb/musb_core.h |    7 ++++---
>  drivers/usb/musb/musb_host.c |   36 ++++++++++++++++++------------------
>  3 files changed, 25 insertions(+), 24 deletions(-)
> 
> diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
> index ebe0828..dbf8861 100644
> --- a/drivers/usb/musb/musb_core.c
> +++ b/drivers/usb/musb/musb_core.c
> @@ -1445,6 +1445,9 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb)
>  
>  		hw_ep->regs = MUSB_EP_OFFSET(i, 0) + mbase;
>  #ifdef CONFIG_USB_MUSB_HDRC_HCD
> +		/* init list of in and out qhs */
> +		INIT_LIST_HEAD(&hw_ep->in_list);
> +		INIT_LIST_HEAD(&hw_ep->out_list);
>  		hw_ep->target_regs = MUSB_BUSCTL_OFFSET(i, 0) + mbase;
>  		hw_ep->rx_reinit = 1;
>  		hw_ep->tx_reinit = 1;
> @@ -1790,9 +1793,6 @@ allocate_instance(struct device *dev,
>  	/* usbcore sets dev->driver_data to hcd, and sometimes uses that... */
>  
>  	musb = hcd_to_musb(hcd);
> -	INIT_LIST_HEAD(&musb->control);
> -	INIT_LIST_HEAD(&musb->in_bulk);
> -	INIT_LIST_HEAD(&musb->out_bulk);
>  
>  	hcd->uses_new_polling = 1;
>  
> diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
> index 4972a3b..27cd1e3 100644
> --- a/drivers/usb/musb/musb_core.h
> +++ b/drivers/usb/musb/musb_core.h
> @@ -271,6 +271,10 @@ struct musb_hw_ep {
>  	struct musb_qh		*in_qh;
>  	struct musb_qh		*out_qh;
>  
> +	/* list of rx and tx qhs */
> +	struct list_head        in_list;
> +	struct list_head        out_list;
> +
>  	u8			rx_reinit;
>  	u8			tx_reinit;
>  #endif
> @@ -328,9 +332,6 @@ struct musb {
>  	 */
>  	struct musb_hw_ep	*bulk_ep;
>  
> -	struct list_head	control;	/* of musb_qh */
> -	struct list_head	in_bulk;	/* of musb_qh */
> -	struct list_head	out_bulk;	/* of musb_qh */
>  	struct musb_qh	*in[16];
>  	struct musb_qh	*out[16];
>  #endif
> diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
> index b77ca0b..014401c 100644
> --- a/drivers/usb/musb/musb_host.c
> +++ b/drivers/usb/musb/musb_host.c
> @@ -1223,7 +1223,7 @@ void musb_host_tx(struct musb *musb, u8 epnum)
>  		 * transfer, if there's some other (nonperiodic) tx urb
>  		 * that could use this fifo.  (dma complicates it...)
>  		 *
> -		 * if (bulk && qh->ring.next != &musb->out_bulk), then
> +		 * if (bulk && qh->ring.next != &hw_ep->out_list), then
>  		 * we have a candidate... NAKing is *NOT* an error
>  		 */
>  		musb_ep_select(mbase, epnum);
> @@ -1449,13 +1449,13 @@ void musb_host_rx(struct musb *musb, u8 epnum)
>  			 * transfer, if there's some other (nonperiodic) rx urb
>  			 * that could use this fifo.  (dma complicates it...)
>  			 *
> -			 * if (bulk && qh->ring.next != &musb->in_bulk), then
> +			 * if (bulk && qh->ring.next != &hw_wp->in_list), then
>  			 * we have a candidate... NAKing is *NOT* an error
>  			 */
>  			DBG(6, "RX end %d NAK timeout\n", epnum);
>  			if (usb_pipebulk(urb->pipe) && qh->mux == 1 &&
> -				(musb->in_bulk.next->next != &musb->in_bulk) &&
> -					bulk_nak_timeout) {
> +				(hw_ep->in_list.next->next != &hw_ep->in_list)
> +					 && bulk_nak_timeout) {
>  				musb_bulk_nak_timeout(musb, hw_ep);
>  				return;
>  			}
> @@ -1744,8 +1744,8 @@ static int musb_schedule(
>  
>  	/* use fixed hardware for control and bulk */
>  	if (qh->type == USB_ENDPOINT_XFER_CONTROL) {
> -		head = &musb->control;
>  		hw_ep = musb->control_ep;
> +		head = &hw_ep->in_list;

yeah, this looks odd. It really looks like control can only be done for
in transfers. At least a comment in the structure would be nice. Also,
do you have any measurement of improvements after this patch ?

-- 
balbi
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux