From: David Brownell <dbrownell@xxxxxxxxxxxxxxxxxxxxx>
Build fixes for isp1301_omap; no behavior changes:
- fix incorrect probe() signature (it changed many months ago)
- provide missing functions on H3 and H4 boards
- "sparse" fixes (static, NULL-vs-0)
The H3 build bits subset some of the stuff that was previously in
the OMAP tree but never went to mainline.
Signed-off-by: David Brownell <dbrownell@xxxxxxxxxxxxxxxxxxxxx>
---
drivers/i2c/chips/isp1301_omap.c | 65 ++++++++++++++++++++++++++-----------
1 file changed, 47 insertions(+), 18 deletions(-)
--- a/drivers/i2c/chips/isp1301_omap.c
+++ b/drivers/i2c/chips/isp1301_omap.c
@@ -25,6 +25,7 @@
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
+#include <linux/gpio.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
#include <linux/usb.h>
@@ -34,7 +35,10 @@
#include <linux/io.h>
#include <asm/irq.h>
+#include <asm/mach-types.h>
+
#include <mach/usb.h>
+#include <mach/mux.h>
#ifndef DEBUG
@@ -89,14 +93,9 @@ struct isp1301 {
/*-------------------------------------------------------------------------*/
-#ifdef CONFIG_MACH_OMAP_H2
-
/* board-specific PM hooks */
-#include <asm/gpio.h>
-#include <mach/mux.h>
-#include <asm/mach-types.h>
-
+#if defined(CONFIG_MACH_OMAP_H2) || defined(CONFIG_MACH_OMAP_H3)
#if defined(CONFIG_TPS65010) || defined(CONFIG_TPS65010_MODULE)
@@ -136,6 +135,33 @@ static inline void notresponding(struct
#endif
+#if defined(CONFIG_MACH_OMAP_H4)
+
+static void enable_vbus_draw(struct isp1301 *isp, unsigned mA)
+{
+ /* H4 controls this by DIP switch S2.4; no soft control.
+ * ON means the charger is always enabled. Leave it OFF
+ * unless the OTG port is used only in B-peripheral mode.
+ */
+}
+
+static void enable_vbus_source(struct isp1301 *isp)
+{
+ /* this board won't supply more than 8mA vbus power.
+ * some boards can switch a 100ma "unit load" (or more).
+ */
+}
+
+
+/* products will deliver OTG messages with LEDs, GUI, etc */
+static inline void notresponding(struct isp1301 *isp)
+{
+ printk(KERN_NOTICE "OTG device not responding.\n");
+}
+
+
+#endif
+
/*-------------------------------------------------------------------------*/
static struct i2c_driver isp1301_driver;
@@ -335,8 +361,7 @@ static int gadget_suspend(struct isp1301
* NOTE: guaranteeing certain response times might mean we shouldn't
* share keventd's work queue; a realtime task might be safest.
*/
-void
-isp1301_defer_work(struct isp1301 *isp, int work)
+static void isp1301_defer_work(struct isp1301 *isp, int work)
{
int status;
@@ -513,7 +538,6 @@ static void update_otg1(struct isp1301 *
otg_ctrl &= ~OTG_XCEIV_INPUTS;
otg_ctrl &= ~(OTG_ID|OTG_ASESSVLD|OTG_VBUSVLD);
-
if (int_src & INTR_SESS_VLD)
otg_ctrl |= OTG_ASESSVLD;
else if (isp->otg.state == OTG_STATE_A_WAIT_VFALL) {
@@ -887,11 +911,11 @@ static int otg_probe(struct platform_dev
static int otg_remove(struct platform_device *dev)
{
- otg_dev = 0;
+ otg_dev = NULL;
return 0;
}
-struct platform_driver omap_otg_driver = {
+static struct platform_driver omap_otg_driver = {
.probe = otg_probe,
.remove = otg_remove,
.driver = {
@@ -1213,6 +1237,8 @@ static void isp1301_release(struct devic
isp = dev_get_drvdata(dev);
+ /* FIXME -- not with a "new style" driver, it doesn't!! */
+
/* ugly -- i2c hijacks our memory hook to wait_for_completion() */
if (isp->i2c_release)
isp->i2c_release(dev);
@@ -1234,7 +1260,7 @@ static int __exit isp1301_remove(struct
otg_unbind(isp);
#endif
if (machine_is_omap_h2())
- omap_free_gpio(2);
+ gpio_free(2);
isp->timer.data = 0;
set_bit(WORK_STOP, &isp->todo);
@@ -1242,7 +1268,7 @@ static int __exit isp1301_remove(struct
flush_scheduled_work();
put_device(&i2c->dev);
- the_transceiver = 0;
+ the_transceiver = NULL;
return 0;
}
@@ -1296,7 +1322,7 @@ isp1301_set_host(struct otg_transceiver
if (!host) {
omap_writew(0, OTG_IRQ_EN);
power_down(isp);
- isp->otg.host = 0;
+ isp->otg.host = NULL;
return 0;
}
@@ -1345,7 +1371,9 @@ static int
isp1301_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *gadget)
{
struct isp1301 *isp = container_of(otg, struct isp1301, otg);
+#ifndef CONFIG_USB_OTG
u32 l;
+#endif
if (!otg || isp != the_transceiver)
return -ENODEV;
@@ -1355,7 +1383,7 @@ isp1301_set_peripheral(struct otg_transc
if (!isp->otg.default_a)
enable_vbus_draw(isp, 0);
usb_gadget_vbus_disconnect(isp->otg.gadget);
- isp->otg.gadget = 0;
+ isp->otg.gadget = NULL;
power_down(isp);
return 0;
}
@@ -1380,7 +1408,7 @@ isp1301_set_peripheral(struct otg_transc
power_up(isp);
isp->otg.state = OTG_STATE_B_IDLE;
- if (machine_is_omap_h2())
+ if (machine_is_omap_h2() || machine_is_omap_h3())
isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0);
isp1301_set_bits(isp, ISP1301_INTERRUPT_RISING,
@@ -1500,7 +1528,8 @@ isp1301_start_hnp(struct otg_transceiver
/*-------------------------------------------------------------------------*/
-static int __init isp1301_probe(struct i2c_client *i2c)
+static int __init
+isp1301_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
{
int status;
struct isp1301 *isp;
@@ -1648,7 +1677,7 @@ module_init(isp_init);
static void __exit isp_exit(void)
{
if (the_transceiver)
- otg_set_transceiver(0);
+ otg_set_transceiver(NULL);
i2c_del_driver(&isp1301_driver);
}
module_exit(isp_exit);
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
