Vbus is switched off (after a_wait_bcon) whenever a device is disconnected from musb host even when musb is configured only as host.Earlier we use to switch on the power using [echo "F" >/proc/driver/musb_hdrc] but now this proc entry is deleted thus musb doesn't work after device disconnect. This patch puts is_otg_enabled() check before scheduling a switch-off timer in disconnect path. Signed-off-by: Ajay Kumar Gupta <ajay.gupta@xxxxxx> --- drivers/usb/musb/musb_core.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index dbf8861..6856da3 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -767,7 +767,7 @@ static irqreturn_t musb_stage2_irq(struct musb *musb, u8 int_usb, case OTG_STATE_A_HOST: case OTG_STATE_A_SUSPEND: musb_root_disconnect(musb); - if (musb->a_wait_bcon != 0) + if (musb->a_wait_bcon != 0 && is_otg_enabled(musb)) musb_platform_try_idle(musb, jiffies + msecs_to_jiffies(musb->a_wait_bcon)); break; -- 1.5.6 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
