Signed-off-by: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
---
arch/arm/mach-omap2/board-n800-camera.c | 4 ++--
arch/arm/mach-omap2/board-n800-mmc.c | 14 +++++++-------
arch/arm/mach-omap2/board-n800-usb.c | 6 +++---
arch/arm/mach-omap2/board-n800.c | 6 +++---
4 files changed, 15 insertions(+), 15 deletions(-)
diff --git a/arch/arm/mach-omap2/board-n800-camera.c b/arch/arm/mach-omap2/board-n800-camera.c
index 1f3b1e9..3959128 100644
--- a/arch/arm/mach-omap2/board-n800-camera.c
+++ b/arch/arm/mach-omap2/board-n800-camera.c
@@ -25,13 +25,13 @@
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/videodev2.h>
+#include <linux/gpio.h>
#include <linux/i2c/menelaus.h>
#include <media/v4l2-int-device.h>
#include <asm/mach-types.h>
-#include <mach/gpio.h>
#include <mach/board.h>
#include <../drivers/cbus/retu.h>
@@ -356,7 +356,7 @@ void __init n800_cam_init(void)
{
int r;
- r = omap_request_gpio(N800_CAM_SENSOR_RESET_GPIO);
+ r = gpio_request(N800_CAM_SENSOR_RESET_GPIO, "TCM825x reset");
if (r < 0) {
printk(KERN_WARNING "%s: failed to request gpio\n",
__func__);
diff --git a/arch/arm/mach-omap2/board-n800-mmc.c b/arch/arm/mach-omap2/board-n800-mmc.c
index 469572e..178f895 100644
--- a/arch/arm/mach-omap2/board-n800-mmc.c
+++ b/arch/arm/mach-omap2/board-n800-mmc.c
@@ -11,12 +11,12 @@
#include <linux/delay.h>
#include <linux/platform_device.h>
+#include <linux/gpio.h>
#include <linux/i2c/menelaus.h>
#include <asm/mach-types.h>
#include <mach/mmc.h>
-#include <mach/gpio.h>
#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
@@ -287,11 +287,11 @@ static void n800_mmc_cleanup(struct device *dev)
{
menelaus_unregister_mmc_callback();
- omap_free_gpio(slot_switch_gpio);
+ gpio_free(slot_switch_gpio);
if (machine_is_nokia_n810()) {
- omap_free_gpio(n810_slot2_pw_vddf);
- omap_free_gpio(n810_slot2_pw_vdd);
+ gpio_free(n810_slot2_pw_vddf);
+ gpio_free(n810_slot2_pw_vdd);
}
}
@@ -347,16 +347,16 @@ void __init n800_mmc_init(void)
mmc1_data.slots[1].ban_openended = 1;
}
- if (omap_request_gpio(slot_switch_gpio) < 0)
+ if (gpio_request(slot_switch_gpio, "MMC slot switch") < 0)
BUG();
gpio_direction_output(slot_switch_gpio, 0);
if (machine_is_nokia_n810()) {
- if (omap_request_gpio(n810_slot2_pw_vddf) < 0)
+ if (gpio_request(n810_slot2_pw_vddf, "MMC slot 2 Vddf") < 0)
BUG();
gpio_direction_output(n810_slot2_pw_vddf, 0);
- if (omap_request_gpio(n810_slot2_pw_vdd) < 0)
+ if (gpio_request(n810_slot2_pw_vdd, "MMC slot 2 Vdd") < 0)
BUG();
gpio_direction_output(n810_slot2_pw_vdd, 0);
}
diff --git a/arch/arm/mach-omap2/board-n800-usb.c b/arch/arm/mach-omap2/board-n800-usb.c
index 5ab453d..e182a93 100644
--- a/arch/arm/mach-omap2/board-n800-usb.c
+++ b/arch/arm/mach-omap2/board-n800-usb.c
@@ -14,9 +14,9 @@
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/err.h>
+#include <linux/gpio.h>
#include <linux/usb/musb.h>
#include <mach/gpmc.h>
-#include <mach/gpio.h>
#include <mach/pm.h>
#define TUSB_ASYNC_CS 1
@@ -150,7 +150,7 @@ void __init n800_usb_init(void)
static char announce[] __initdata = KERN_INFO "TUSB 6010\n";
/* PM companion chip power control pin */
- ret = omap_request_gpio(GPIO_TUSB_ENABLE);
+ ret = gpio_request(GPIO_TUSB_ENABLE, "TUSB6010 enable");
if (ret != 0) {
printk(KERN_ERR "Could not get TUSB power GPIO%i\n",
GPIO_TUSB_ENABLE);
@@ -171,5 +171,5 @@ void __init n800_usb_init(void)
return;
err:
- omap_free_gpio(GPIO_TUSB_ENABLE);
+ gpio_free(GPIO_TUSB_ENABLE);
}
diff --git a/arch/arm/mach-omap2/board-n800.c b/arch/arm/mach-omap2/board-n800.c
index 66c7d18..b38b295 100644
--- a/arch/arm/mach-omap2/board-n800.c
+++ b/arch/arm/mach-omap2/board-n800.c
@@ -127,7 +127,7 @@ void __init nokia_n800_init_irq(void)
omap_gpio_init();
#ifdef CONFIG_OMAP_STI
- if (omap_request_gpio(N800_STI_GPIO) < 0) {
+ if (gpio_request(N800_STI_GPIO, "STI") < 0) {
printk(KERN_ERR "Failed to request GPIO %d for STI\n",
N800_STI_GPIO);
return;
@@ -254,7 +254,7 @@ static void __init blizzard_dev_init(void)
{
int r;
- r = omap_request_gpio(N800_BLIZZARD_POWERDOWN_GPIO);
+ r = gpio_request(N800_BLIZZARD_POWERDOWN_GPIO, "Blizzard pd");
if (r < 0)
return;
gpio_direction_output(N800_BLIZZARD_POWERDOWN_GPIO, 1);
@@ -331,7 +331,7 @@ static int __init tea5761_dev_init(void)
pr_debug("Enabling tea5761 at GPIO %d\n",
enable_gpio);
- if (omap_request_gpio(enable_gpio) < 0) {
+ if (gpio_request(enable_gpio, "TEA5761 enable") < 0) {
printk(KERN_ERR "Can't request GPIO %d\n",
enable_gpio);
return -ENODEV;
--
1.5.6.5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
