From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
Let musb use clk_associate to avoid introducing non-standard
clk functions and passing a clk name via pdata.
Signed-off-by: Felipe Balbi <felipe.balbi@xxxxxxxxx>
---
arch/arm/mach-omap2/board-n800-usb.c | 26 --------------------------
arch/arm/mach-omap2/usb-musb.c | 34 +++++++++-------------------------
arch/arm/mach-omap2/usb-tusb6010.c | 2 ++
drivers/usb/musb/musb_core.c | 23 +++++++----------------
4 files changed, 18 insertions(+), 67 deletions(-)
diff --git a/arch/arm/mach-omap2/board-n800-usb.c b/arch/arm/mach-omap2/board-n800-usb.c
index fc128f2..c5abc83 100644
--- a/arch/arm/mach-omap2/board-n800-usb.c
+++ b/arch/arm/mach-omap2/board-n800-usb.c
@@ -25,7 +25,6 @@
#define GPIO_TUSB_ENABLE 0
static int tusb_set_power(int state);
-static int tusb_set_clock(struct clk *osc_ck, int state);
#if defined(CONFIG_USB_MUSB_OTG)
# define BOARD_MODE MUSB_OTG
@@ -82,10 +81,8 @@ static struct musb_hdrc_config musb_config = {
static struct musb_hdrc_platform_data tusb_data = {
.mode = BOARD_MODE,
.set_power = tusb_set_power,
- .set_clock = tusb_set_clock,
.min_power = 25, /* x2 = 50 mA drawn from VBUS as peripheral */
.power = 100, /* Max 100 mA VBUS for host mode */
- .clock = "osc_ck",
.config = &musb_config,
};
@@ -121,29 +118,6 @@ static int tusb_set_power(int state)
return retval;
}
-static int osc_ck_on;
-
-static int tusb_set_clock(struct clk *osc_ck, int state)
-{
- if (state) {
- if (osc_ck_on > 0)
- return -ENODEV;
-
- omap2_block_sleep();
- clk_enable(osc_ck);
- osc_ck_on = 1;
- } else {
- if (osc_ck_on == 0)
- return -ENODEV;
-
- clk_disable(osc_ck);
- osc_ck_on = 0;
- omap2_allow_sleep();
- }
-
- return 0;
-}
-
void __init n800_usb_init(void)
{
int ret = 0;
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index 61c5709..99a1b4e 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -31,6 +31,7 @@
#include <mach/pm.h>
#include <mach/mux.h>
#include <mach/usb.h>
+#include <mach/clock.h>
#ifdef CONFIG_USB_MUSB_SOC
static struct resource musb_resources[] = {
@@ -53,27 +54,6 @@ static struct resource musb_resources[] = {
},
};
-static int clk_on;
-
-static int musb_set_clock(struct clk *clk, int state)
-{
- if (state) {
- if (clk_on > 0)
- return -ENODEV;
-
- clk_enable(clk);
- clk_on = 1;
- } else {
- if (clk_on == 0)
- return -ENODEV;
-
- clk_disable(clk);
- clk_on = 0;
- }
-
- return 0;
-}
-
static struct musb_hdrc_eps_bits musb_eps[] = {
{ "ep1_tx", 10, },
{ "ep1_rx", 10, },
@@ -127,10 +107,6 @@ static struct musb_hdrc_platform_data musb_plat = {
#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
.mode = MUSB_PERIPHERAL,
#endif
- .clock = cpu_is_omap34xx()
- ? "hsotgusb_ick"
- : "usbhs_ick",
- .set_clock = musb_set_clock,
.config = &musb_config,
/* REVISIT charge pump on TWL4030 can supply up to
@@ -159,6 +135,14 @@ static struct platform_device musb_device = {
void __init usb_musb_init(void)
{
#ifdef CONFIG_USB_MUSB_SOC
+ /* associate musb clocks with musb device */
+
+ if (cpu_is_omap34xx())
+ omap_clk_associate("hsotgusb_ick", &musb_device.dev);
+
+ if (cpu_is_omap24xx())
+ omap_clk_associate("usbhs_ick", &musb_device.dev);
+
if (platform_device_register(&musb_device) < 0) {
printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n");
return;
diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c
index 2c88207..86e1f42 100644
--- a/arch/arm/mach-omap2/usb-tusb6010.c
+++ b/arch/arm/mach-omap2/usb-tusb6010.c
@@ -18,6 +18,7 @@
#include <mach/gpmc.h>
#include <mach/gpio.h>
#include <mach/mux.h>
+#include <mach/clock.h>
static u8 async_cs, sync_cs;
@@ -250,6 +251,7 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data,
printk(error, 1, status);
return status;
}
+ omap_clk_associate("osc_ck", &tusb_device.dev);
tusb_resources[0].end = tusb_resources[0].start + 0x9ff;
async_cs = async;
gpmc_cs_write_reg(async, GPMC_CS_CONFIG1,
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 128e949..ea9dd90 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1922,7 +1922,6 @@ bad_config:
spin_lock_init(&musb->lock);
musb->board_mode = plat->mode;
musb->board_set_power = plat->set_power;
- musb->set_clock = plat->set_clock;
musb->min_power = plat->min_power;
/* Clock usage is chip-specific ... functional clock (DaVinci,
@@ -1930,13 +1929,11 @@ bad_config:
* code does is make sure a clock handle is available; platform
* code manages it during start/stop and suspend/resume.
*/
- if (plat->clock) {
- musb->clock = clk_get(dev, plat->clock);
- if (IS_ERR(musb->clock)) {
- status = PTR_ERR(musb->clock);
- musb->clock = NULL;
- goto fail;
- }
+ musb->clock = clk_get(dev, "iclk");
+ if (IS_ERR(musb->clock)) {
+ status = PTR_ERR(musb->clock);
+ musb->clock = NULL;
+ goto fail;
}
/* assume vbus is off */
@@ -2159,10 +2156,7 @@ static int musb_suspend(struct platform_device *pdev, pm_message_t message)
*/
}
- if (musb->set_clock)
- musb->set_clock(musb->clock, 0);
- else
- clk_disable(musb->clock);
+ clk_disable(musb->clock);
spin_unlock_irqrestore(&musb->lock, flags);
return 0;
}
@@ -2177,10 +2171,7 @@ static int musb_resume(struct platform_device *pdev)
spin_lock_irqsave(&musb->lock, flags);
- if (musb->set_clock)
- musb->set_clock(musb->clock, 1);
- else
- clk_enable(musb->clock);
+ clk_enable(musb->clock);
/* for static cmos like DaVinci, register values were preserved
* unless for some reason the whole soc powered down and we're
--
1.6.0.2.307.gc427
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
