On Fri, Oct 03, 2008 at 02:52:26PM +0300, Carlos Chinea wrote: > > Signed-off-by: Carlos Chinea <carlos.chinea@xxxxxxxxx> > --- > arch/arm/plat-omap/include/mach/ssi/ssi_gdd_reg.h | 145 ++++++++++++++++++++ > .../plat-omap/include/mach/ssi/ssi_reg_common.h | 73 ++++++++++ > arch/arm/plat-omap/include/mach/ssi/ssi_ssr_reg.h | 56 ++++++++ > arch/arm/plat-omap/include/mach/ssi/ssi_sst_reg.h | 65 +++++++++ > arch/arm/plat-omap/include/mach/ssi/ssi_sys_reg.h | 107 ++++++++++++++ > 5 files changed, 446 insertions(+), 0 deletions(-) > create mode 100644 arch/arm/plat-omap/include/mach/ssi/ssi_gdd_reg.h > create mode 100644 arch/arm/plat-omap/include/mach/ssi/ssi_reg_common.h > create mode 100644 arch/arm/plat-omap/include/mach/ssi/ssi_ssr_reg.h > create mode 100644 arch/arm/plat-omap/include/mach/ssi/ssi_sst_reg.h > create mode 100644 arch/arm/plat-omap/include/mach/ssi/ssi_sys_reg.h > > diff --git a/arch/arm/plat-omap/include/mach/ssi/ssi_gdd_reg.h b/arch/arm/plat-omap/include/mach/ssi/ssi_gdd_reg.h > new file mode 100644 > index 0000000..5ed91cc > --- /dev/null > +++ b/arch/arm/plat-omap/include/mach/ssi/ssi_gdd_reg.h > @@ -0,0 +1,145 @@ > +/* > + * ssi_gdd_reg.h > + * > + * Hardware defintions for SSI Controller GDD registers. > + * > + * HARDWARE: OMAP 2420, OMAP 3430 This is unnecessary, if we happen to use the same in omap4 we're gonna have to update. Please remove. > + * Copyright (C) 2007-2008 Nokia Corporation. All rights reserved. > + * > + * Contact: Carlos Chinea <carlos.chinea@xxxxxxxxx> > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License > + * version 2 as published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, but > + * WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU > + * General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA > + * 02110-1301 USA > + */ > +#ifndef __SSI_GDD_REG_H__ > +#define __SSI_GDD_REG_H__ > + > +#include "ssi_reg_common.h" > + > +#define SSI_GDD_HW_ID_REG SSI_GDD_REG32(0x0000) this is not a good practice, use the correct offsets for all registers > +#define SSI_GDD_PPORT_ID_REG SSI_GDD_REG32(0x0010) > +#define SSI_GDD_MPORT_ID_REG SSI_GDD_REG32(0x0014) > + > +#define SSI_GDD_PPORT_SR_REG SSI_GDD_REG32(0x0020) > +# define SSI_PPORT_ACTIVE_LCH_NUMBER_MASK 0xFF > + > +#define SSI_GDD_MPORT_SR_REG SSI_GDD_REG32(0x0024) > +# define SSI_MPORT_ACTIVE_LCH_NUMBER_MASK 0xFF > + > +#define SSI_GDD_TEST_REG SSI_GDD_REG32(0x0040) ^ trailing whitespace > +# define SSI_TEST 0x1 > + > +#define SSI_GDD_GCR_REG SSI_GDD_REG32(0x0100) > +# define SSI_CLK_AUTOGATING_ON (1<<3) ^^ add spaces around << > +# define SSI_FREE (1<<2) > +# define SSI_SWITCH_OFF 0x1 > + > +#define SSI_GDD_GRST_REG SSI_GDD_REG32(0x0200) ^ trailing whitespace > +# define SSI_SWRESET 0x1 > + > +#define SSI_GDD_CSDP_BASE 0x0800 > +#define SSI_GDD_CSDP_OFFSET 0x40 > +#define SSI_GDD_CSDP_REG(channel) SSI_GDD_REG16(SSI_GDD_CSDP_BASE +\ ^ trailing whitespace > + (channel*SSI_GDD_CSDP_OFFSET)) ^ add spaces around * > +# define SSI_DST_BURST_EN_MASK 0xC000 > +# define SSI_DST_SINGLE_ACCESS0 0x0 > +# define SSI_DST_SINGLE_ACCESS (0x1<<14) > +# define SSI_DST_BURST_4X32_BIT (0x2<<14) > +# define SSI_DST_BURST_8x32_BIT (0x3<<14) /*NOTE: NOT SUPPORTED */ (1 << 14), (2 << 14) and (3 << 14) (up to 9) is enough. ^ add a space before NOTE > + > +# define SSI_DST_MASK 0x1E00 make all the hex numbers lower case > +# define SSI_DST_MEMORY_PORT (0x8<<9) > +# define SSI_DST_PERIPHERAL_PORT (0x9<<9) > + > +# define SSI_SRC_BURST_EN_MASK 0x0180 > +# define SSI_SRC_SINGLE_ACCESS0 0x0 > +# define SSI_SRC_SINGLE_ACCESS (0x1<<7) > +# define SSI_SRC_BURST_4x32_BIT (0x2<<7) > +# define SSI_SRC_BURST_8x32_BIT (0x3<<7) /*NOTE: NOT SUPPORTED */ > + > +# define SSI_SRC_MASK 0x003C > +# define SSI_SRC_MEMORY_PORT (0x8<<2) > +# define SSI_SRC_PERIPHERAL_PORT (0x9<<2) > + > +# define SSI_DATA_TYPE_MASK 0x0003 > +# define SSI_DATA_TYPE_S32 0x2 > + > +#define SSI_GDD_CCR_BASE 0x0802 ^ trailing whitespace > +#define SSI_GDD_CCR_OFFSET 0x40 ^ trailing whitespace > +#define SSI_GDD_CCR_REG(channel) SSI_GDD_REG16(SSI_GDD_CCR_BASE +\ > + (channel*SSI_GDD_CCR_OFFSET)) ^ missing space > +# define SSI_DST_AMODE_MASK (0x3<<14) > +# define SSI_DST_AMODE_CONST 0x0 > +# define SSI_DST_AMODE_POSTINC (0x1<<12) > + > +# define SSI_SRC_AMODE_MASK (0x3<<12) > +# define SSI_SRC_AMODE_CONST 0x0 > +# define SSI_SRC_AMODE_POSTINC (0x1<<12) > + > +# define SSI_CCR_ENABLE (0x1<<7) > + > +# define SSI_CCR_SYNC_MASK 0x001F > + > +#define SSI_GDD_CICR_BASE 0x0804 ^ trailing whitespace > +#define SSI_GDD_CICR_OFFSET 0x40 > +#define SSI_GDD_CICR_REG(channel) SSI_GDD_REG16(SSI_GDD_CICR_BASE +\ > + (channel*SSI_GDD_CICR_OFFSET)) > +# define SSI_BLOCK_IE (0x1<<5) (1 << 5) > +# define SSI_HALF_IE (0x1<<2) (1 << 2) > +# define SSI_TOUT_IE 0x1 (1 << 0) > + > +#define SSI_GDD_CSR_BASE 0x0806 ^ trailing whitespace > +#define SSI_GDD_CSR_OFFSET 0x40 ^ trailing whitespace > +#define SSI_GDD_CSR_REG(channel) SSI_GDD_REG16(SSI_GDD_CSR_BASE +\ > + (channel*SSI_GDD_CSR_OFFSET)) > +# define SSI_CSR_SYNC (0x1<<6) (1 << 6) > +# define SSI_CSR_BLOCK (0x1<<5) (1 << 5) > +# define SSI_CSR_HALF (0x1<<2) (1 << 2) > +# define SSI_CSR_TOUR 0x1 > + > +#define SSI_GDD_CSSA_BASE 0x0808 ^ trailing whitespace > +#define SSI_GDD_CSSA_OFFSET 0x40 > +#define SSI_GDD_CSSA_REG(channel) SSI_GDD_REG32(SSI_GDD_CSSA_BASE +\ > + (channel*SSI_GDD_CSSA_OFFSET)) ^ missing space > + > +#define SSI_GDD_CDSA_BASE 0x080C ^ trailing whitespace > +#define SSI_GDD_CDSA_OFFSET 0x40 > +#define SSI_GDD_CDSA_REG(channel) SSI_GDD_REG32(SSI_GDD_CDSA_BASE +\ > + (channel*SSI_GDD_CDSA_OFFSET)) ^ missing space > + > +#define SSI_GDD_CEN_BASE 0x0810 > +#define SSI_GDD_CEN_OFFSET 0x40 > +#define SSI_GDD_CEN_REG(channel) SSI_GDD_REG16(SSI_GDD_CEN_BASE +\ > + (channel*SSI_GDD_CEN_OFFSET)) ^ missing space > + > +#define SSI_GDD_CSAC_BASE 0x0818 ^ trailing whitespace > +#define SSI_GDD_CSAC_OFFSET 0x40 > +#define SSI_GDD_CSAC_REG(channel) SSI_GDD_REG16(SSI_GDD_CSAC_BASE +\ ^ trailing whitespace > + (channel*SSI_GDD_CSAC_OFFSET)) ^ missing space > + > +#define SSI_GDD_CDAC_BASE 0x081A ^ trailing whitespace > +#define SSI_GDD_CDAC_OFFSET 0x40 > +#define SSI_GDD_CDAC_REG(channel) SSI_GDD_REG16(SSI_GDD_CDAC_BASE +\ ^ trailing whitespace > + (channel*SSI_GDD_CDAC_OFFSET)) ^ missing space > + > +#define SSI_GDD_CLNK_CTRL_BASE 0x0828 > +#define SSI_GDD_CLNK_CTRL_OFFSET 0x40 > +#define SSI_GDD_CLNK_CTRL_REG(channel) SSI_GDD_REG16(SSI_GDD_CLNK_CTRL_BASE +\ > + (channel*SSI_GDD_CLNK_CTRL_OFFSET)) ^ missing space > +# define SSI_ENABLE_LNK (0x1<<15) (1 << 15) > +# define SSI_STOP_LNK (0x1<<14) (1 << 14) > +# define NEXT_CH_ID_MASK 0xF > + > +#endif > diff --git a/arch/arm/plat-omap/include/mach/ssi/ssi_reg_common.h b/arch/arm/plat-omap/include/mach/ssi/ssi_reg_common.h > new file mode 100644 > index 0000000..e66fb43 > --- /dev/null > +++ b/arch/arm/plat-omap/include/mach/ssi/ssi_reg_common.h > @@ -0,0 +1,73 @@ > +/* > + * ssi_reg_common.h > + * > + * Common hardware definitions for SSI. > + * > + * HARDWARE: OMAP 2420, 3430 unnecessary > + * > + * Copyright (C) 2007-2008 Nokia Corporation. All rights reserved. > + * > + * Contact: Carlos Chinea <carlos.chinea@xxxxxxxxx> > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License > + * version 2 as published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, but > + * WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU > + * General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA > + * 02110-1301 USA > + */ > + > +#ifndef __SSI_REG_COMMON_H__ > +#define __SSI_REG_COMMON_H__ > + > +#define SSI_COMMON_BASE_ADDR 0x48050000 > + > +/* SSI system registers */ > +#define SSI_SYS_OFFSET 0x8000 > +#define SSI_SYS_REG32(offset) (SSI_SYS_OFFSET + (offset)) > +/* SSI GDD registers */ > +#define SSI_GDD_OFFSET 0x9000 > +#define SSI_GDD_REG32(offset) (SSI_GDD_OFFSET + (offset)) > +#define SSI_GDD_REG16(offset) (SSI_GDD_OFFSET + (offset)) > + > +/* SSI SST registers */ > +/* General offset of SST port 1. First SST port register.*/ > +#define SSI_SST1_OFFSET 0xA000 > +/* General offset of SST port 2.*/ > +#define SSI_SST2_OFFSET 0xB000 > +/* Offset among the SST ports.*/ > +#define SSI_SST_PORT_OFFSET 0x1000 > +#define SSI_SST_OFFSET(port) (SSI_SST1_OFFSET +\ > + ((port-1)*(SSI_SST_PORT_OFFSET))) ^ ^ missing spaces > +#define SSI_SST_REG(port, offset) (SSI_SST_OFFSET(port) + (offset)) > + > +/* SSI SSR registers */ > +/* General offset of SSR port 1. First SSR port register.*/ > +#define SSI_SSR1_OFFSET 0xA800 > +/* General offset of SSR port 2.*/ > +#define SSI_SSR2_OFFSET 0xB800 > +/* Offset among the SSR ports.*/ > +#define SSI_SSR_PORT_OFFSET 0x1000 > +#define SSI_SSR_OFFSET(port) (SSI_SSR1_OFFSET +\ > + ((port-1)*(SSI_SSR_PORT_OFFSET))) ^ missing space > +#define SSI_SSR_REG(port, offset) (SSI_SSR_OFFSET(port) + (offset)) > + > +#define SSI_IOMEM_BASE_ADDR SSI_COMMON_BASE_ADDR > +#define SSI_IOMEM_SIZE 0x3C00 > + > +/* > + * FIXME: Following definitions to be removed. > + * They are used for checking that the SSI clocks are stable before accessing > + * the SSI registers. > + */ > +#define OMAP_COMMON_BASE 0x48000000 > +#define CM_IDLEST1_CORE_REG 0x4A20 > +#define ST_SSI 1 > +#endif > diff --git a/arch/arm/plat-omap/include/mach/ssi/ssi_ssr_reg.h b/arch/arm/plat-omap/include/mach/ssi/ssi_ssr_reg.h > new file mode 100644 > index 0000000..b272047 > --- /dev/null > +++ b/arch/arm/plat-omap/include/mach/ssi/ssi_ssr_reg.h > @@ -0,0 +1,56 @@ > +/* > + * ssi_sst_reg.h > + * > + * Hardware definitions for SSI controller SSR registers. > + * > + * HARDWARE: OMAP 2420, 3430 unnecessary > + * > + * Copyright (C) 2007-2008 Nokia Corporation. All rights reserved. > + * > + * Contact: Carlos Chinea <carlos.chinea@xxxxxxxxx> > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License > + * version 2 as published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, but > + * WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU > + * General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA > + * 02110-1301 USA > + */ > + > +#ifndef __SSI_SSR_REG_H__ > +#define __SSI_SSR_REG_H__ > + > +#include "ssi_reg_common.h" > + > +#define SSI_SSR_ID_REG(port) SSI_SSR_REG(port, 0x0000) > +#define SSI_SSR_MODE_REG(port) SSI_SSR_REG(port, 0x0004) > +#define SSI_SSR_FRAMESIZE_REG(port) SSI_SSR_REG(port, 0x0008) > +#define SSI_SSR_RXSTATE_REG(port) SSI_SSR_REG(port, 0x000C) ^^ trailing whitespaces > +#define SSI_SSR_BUFSTATE_REG(port) SSI_SSR_REG(port, 0x0010) ^ trailing whitespace > +# define NOTEMPTY(channel) (1<<channel) ^^ missing spaces > +#define SSI_SSR_BREAK_REG(port) SSI_SSR_REG(port, 0x001C) > +#define SSI_SSR_ERROR_REG(port) SSI_SSR_REG(port, 0x0020) > +#define SSI_SSR_ERRORACK_REG(port) SSI_SSR_REG(port, 0x0024) > +#define SSI_SSR_OVERRUN_REG(port) SSI_SSR_REG(port, 0x002C) > +#define SSI_SSR_OVERRUNACK_REG(port) SSI_SSR_REG(port, 0x0030) > +#define SSI_SSR_TIMEOUT_REG(port) SSI_SSR_REG(port, 0x0030) > +# define SSI_TIMEOUT_DEFAULT 0 > +#define SSI_SSR_CHANNELS_REG(port) SSI_SSR_REG(port, 0x0028) > + > +#define SSI_SSR_BUFFER_OFFSET_BASE 0x0080 > +#define SSI_SSR_BUFFER_CH_REG(port, channel) SSI_SSR_REG(port, \ > + (SSI_SSR_BUFFER_OFFSET_BASE +\ > + (channel * 0x04))) > + > +#define SSI_SSR_SWAPBUFFER_OFFSET_BASE 0x00C0 > +#define SSI_SSR_SWAPBUFFER_CH_REG(port, channel) SSI_SSR_REG(port, \ > + (SSI_SSR_SWAPBUFFER_OFFSET_BASE\ > + + (channel * 0x04))) > +#endif > diff --git a/arch/arm/plat-omap/include/mach/ssi/ssi_sst_reg.h b/arch/arm/plat-omap/include/mach/ssi/ssi_sst_reg.h > new file mode 100644 > index 0000000..ed15908 > --- /dev/null > +++ b/arch/arm/plat-omap/include/mach/ssi/ssi_sst_reg.h > @@ -0,0 +1,65 @@ > +/* > + * ssi_sst_reg.h > + * > + * Hardware definitions for SSI controller SST registers. > + * > + * HARDWARE: OMAP 2420, 3430 unnecessary > + * > + * Copyright (C) 2007-2008 Nokia Corporation. All rights reserved. > + * > + * Contact: Carlos Chinea <carlos.chinea@xxxxxxxxx> > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License > + * version 2 as published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, but > + * WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU > + * General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA > + * 02110-1301 USA > + */ > + > +#ifndef __SSI_SST_REG_H__ > +#define __SSI_SST_REG_H__ > + > +#include "ssi_reg_common.h" > + > +#define SSI_SST_ID_REG(port) SSI_SST_REG(port, 0x0000) > +#define SSI_SST_MODE_REG(port) SSI_SST_REG(port, 0x0004) > +# define SSI_MODE_VAL_MASK 0x3 > +# define SSI_MODE_SLEEP 0x0 > +# define SSI_MODE_STREAM 0x1 > +# define SSI_MODE_FRAME 0x2 > +# define SSI_MODE_MULTIPOINTS 0x3 > +#define SSI_SST_FRAMESIZE_REG(port) SSI_SST_REG(port, 0x0008) > +# define SSI_FRAMESIZE_DEFAULT 31 > +#define SSI_SST_TXSTATE_REG(port) SSI_SST_REG(port, 0x000C) ^^ trailing whitespaces > +# define TXSTATE_IDLE 0x0 > +#define SSI_SST_BUFSTATE_REG(port) SSI_SST_REG(port, 0x0010) ^ trailing whitespace > +# define NOTFULL(channel) (1<<channel) ^ trailing whitespace ^^ missing spaces > +#define SSI_SST_DIVISOR_REG(port) SSI_SST_REG(port, 0x0018) > +# define SSI_DIVISOR_DEFAULT 1 > + > +#define SSI_SST_BREAK_REG(port) SSI_SST_REG(port, 0x0020) > +#define SSI_SST_CHANNELS_REG(port) SSI_SST_REG(port, 0x0024) > +# define SSI_CHANNELS_DEFAULT 4 > + > +#define SSI_SST_ARBMODE_REG(port) SSI_SST_REG(port, 0x0028) > +# define SSI_ARBMODE_ROUNDROBIN 0x0 > +# define SSI_ARBMODE_PRIORITY 0x1 > + > +#define SSI_SST_BUFFER_OFFSET_BASE 0x0080 > +#define SSI_SST_BUFFER_CH_REG(port, channel) SSI_SST_REG(port, \ > + (SSI_SST_BUFFER_OFFSET_BASE +\ > + (channel * 0x4))) > + > +#define SSI_SST_SWAPBUF_OFFSET_BASE 0x00C0 > +#define SSI_SST_SWAPBUF_CH_REG(port, channel) SSI_SST_REG(port, \ > + (SSI_SST_SWAPBUF_OFFSET_BASE +\ > + (channel * 0x4))) > +#endif > diff --git a/arch/arm/plat-omap/include/mach/ssi/ssi_sys_reg.h b/arch/arm/plat-omap/include/mach/ssi/ssi_sys_reg.h > new file mode 100644 > index 0000000..2f1e1f5 > --- /dev/null > +++ b/arch/arm/plat-omap/include/mach/ssi/ssi_sys_reg.h > @@ -0,0 +1,107 @@ > +/* > + * ssi_sys_reg.h > + * > + * Hardware defintions for SSI Controller system registers. > + * > + * HARDWARE: OMAP 2420, 3430 unnecessary > + * > + * Copyright (C) 2007-2008 Nokia Corporation. All rights reserved. > + * > + * Contact: Carlos Chinea <carlos.chinea@xxxxxxxxx> > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License > + * version 2 as published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, but > + * WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU > + * General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA > + * 02110-1301 USA > + */ > + > +#ifndef __SSI_SYS_REG_H__ > +#define __SSI_SYS_REG_H__ > + > +#include "ssi_reg_common.h" > + > +#define SSI_SYS_REVISION_REG SSI_SYS_REG32(0x0000) > +# define SSI_REV_MASK 0x000000FF > +# define SSI_REV_MAJOR 0xF0 > +# define SSI_REV_MINOR 0x0F > + > +#define SSI_SYS_SYSCONFIG_REG SSI_SYS_REG32(0x0010) > +# define SSI_AUTOIDLE 1 > +# define SSI_SOFTRESET (1<<1) add spaces > +# define SSI_SIDLEMODE_FORCE 0 > +# define SSI_SIDLEMODE_NO (1<<3) add spaces > +# define SSI_SIDLEMODE_SMART (1<<4) add spaces > +# define SSI_SIDLEMODE_MASK 0x00000018 > +# define SSI_MIDLEMODE_FORCE 0 > +# define SSI_MIDLEMODE_NO (1<<12) add spaces > +# define SSI_MIDLEMODE_SMART (1<<13) add spaces > +# define SSI_MIDLEMODE_MASK 0x00003000 > + > +#define SSI_SYS_SYSSTATUS_REG SSI_SYS_REG32(0x0014) > +# define SSI_RESETDONE 1 > + > +#define SSI_SYS_MPU_STATUS_BASE 0x0808 > +#define SSI_SYS_MPU_STATUS_PORT_OFFSET 0x10 > +#define SSI_SYS_MPU_STATUS_IRQ_OFFSET 0x2 > +#define SSI_SYS_MPU_STATUS_REG(port, irq) \ > + SSI_SYS_REG32(SSI_SYS_MPU_STATUS_BASE +\ > + (((port-1)*SSI_SYS_MPU_STATUS_PORT_OFFSET) +\ > + (irq*SSI_SYS_MPU_STATUS_IRQ_OFFSET))) > + > +#define SSI_SYS_MPU_ENABLE_BASE 0x080C > +#define SSI_SYS_MPU_ENABLE_PORT_OFFSET 0x10 > +#define SSI_SYS_MPU_ENABLE_IRQ_OFFSET 0x8 > +#define SSI_SYS_MPU_ENABLE_REG(port, irq) \ > + SSI_SYS_REG32(SSI_SYS_MPU_ENABLE_BASE +\ > + (((port-1)*SSI_SYS_MPU_ENABLE_PORT_OFFSET) +\ add spaces > + (irq*SSI_SYS_MPU_ENABLE_IRQ_OFFSET))) add spaces > + > +#define SSI_SYS_DSP_STATUS_BASE 0x0830 > +#define SSI_SYS_DSP_STATUS_PORT_OFFSET 0x10 > +#define SSI_SYS_DSP_STATUS_IRQ_OFFSET 0x8 > +#define SSI_SYS_DSP_STATUS_REG(port, irq) \ > + SSI_SYS_REG32(SSI_SYS_DSP_STATUS_BASE +\ > + (((port-1)*SSI_SYS_DSP_STATUS_PORT_OFFSET) +\ add spaces > + (irq*SSI_SYS_DSP_STATUS_IRQ_OFFSET))) add spaces > + > +#define SSI_SYS_DSP_ENABLE_BASE 0x0834 > +#define SSI_SYS_DSP_ENABLE_PORT_OFFSET 0x10 > +#define SSI_SYS_DSP_ENABLE_IRQ_OFFSET 0x8 > +#define SSI_SYS_DSP_ENABLE_REG(port, irq) \ > + SSI_SYS_REG32(SSI_SYS_DSP_ENABLE_BASE +\ > + (((port-1)*SSI_SYS_DSP_ENABLE_PORT_OFFSET) +\ add spaces > + (irq*SSI_SYS_DSP_ENABLE_IRQ_OFFSET))) add spaces > +# define SSI_SST_DATAACCEPT(channel) (1<<channel) add spaces > +# define SSI_SSR_DATAAVAILABLE(channel) (1<<(channel + 8)) add spaces > +# define SSI_SSR_DATAOVERRUN(channel) (1<<(channel + 16)) add spaces > +# define SSI_ERROROCCURED (1<<24) add spaces > +# define SSI_BREAKDETECTED (1<<25) add spaces > + > +#define SSI_SYS_GDD_MPU_IRQ_STATUS_REG SSI_SYS_REG32(0x0800) > +#define SSI_SYS_GDD_MPU_IRQ_ENABLE_REG SSI_SYS_REG32(0x0804) > +#define SSI_SYS_GDD_DSP_IRQ_STATUS_REG SSI_SYS_REG32(0x0828) ^ trailing whitespace > +#define SSI_SYS_GDD_DSP_IRQ_ENABLE_REG SSI_SYS_REG32(0x082C) ^ trailing whitespace > +# define SSI_GDD_LCH(channel) (1<<channel) > + > +#define SSI_SYS_WAKE_OFFSET 0x10 > +#define SSI_SYS_WAKE_BASE 0x0C00 > +#define SSI_SYS_WAKE_REG(port) SSI_SYS_REG32(SSI_SYS_WAKE_BASE +\ ^ trailing whitespace > + ((port-1)*SSI_SYS_WAKE_OFFSET)) add spaces > +#define SSI_SYS_CLEAR_WAKE_BASE 0x0C04 > +#define SSI_SYS_CLEAR_WAKE_REG(port) SSI_SYS_REG32(SSI_SYS_CLEAR_WAKE_BASE +\ > + ((port-1)*SSI_SYS_WAKE_OFFSET)) add spaces > +#define SSI_SYS_SET_WAKE_BASE 0x0C08 > +#define SSI_SYS_SET_WAKE_REG(port) SSI_SYS_REG32(SSI_SYS_SET_WAKE_BASE +\ > + ((port-1)*SSI_SYS_WAKE_OFFSET)) add spaces > +# define SSI_WAKE(channel) (1<<channel) add spaces > +# define SSI_WAKE_MASK 0xFF lower case -- balbi -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
