From: David Brownell <dbrownell@xxxxxxxxxxxxxxxxxxxxx>
Make the hsmmc code use genirq interfaces to make sure the
card detect IRQ triggers on both edges. Remove the older
TWL-specific infrastructure for making that happen.
Signed-off-by: David Brownell <dbrownell@xxxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Felipe Balbi <felipe.balbi@xxxxxxxxx>
---
arch/arm/mach-omap2/hsmmc.c | 5 -----
drivers/gpio/twl4030-gpio.c | 38 ++++++++------------------------------
drivers/mmc/host/omap_hsmmc.c | 4 +++-
include/linux/i2c/twl4030.h | 4 ----
4 files changed, 11 insertions(+), 40 deletions(-)
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index 7334d86..2ba9986 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -65,11 +65,6 @@ static int hsmmc_late_init(struct device *dev)
if (ret)
goto err;
- ret = twl4030_set_gpio_edge_ctrl(MMC1_CD_IRQ,
- TWL4030_GPIO_EDGE_RISING | TWL4030_GPIO_EDGE_FALLING);
- if (ret)
- goto err;
-
ret = twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0x02,
TWL_GPIO_PUPDCTR1);
if (ret)
diff --git a/drivers/gpio/twl4030-gpio.c b/drivers/gpio/twl4030-gpio.c
index e709fbb..404cb34 100644
--- a/drivers/gpio/twl4030-gpio.c
+++ b/drivers/gpio/twl4030-gpio.c
@@ -509,10 +509,7 @@ int twl4030_set_gpio_pull(int gpio, int pull_dircn)
}
#endif
-/*
- * Configure Edge control for a GPIO pin on TWL4030
- */
-int twl4030_set_gpio_edge_ctrl(int gpio, int edge)
+static int twl4030_set_gpio_edge_ctrl(int gpio, int edge)
{
u8 c_bnk = GET_GPIO_CTL_BANK(gpio);
u8 c_off = GET_GPIO_CTL_OFF(gpio);
@@ -521,33 +518,26 @@ int twl4030_set_gpio_edge_ctrl(int gpio, int edge)
u8 base = 0;
int ret = 0;
- if (unlikely((gpio >= TWL4030_GPIO_MAX)
- || !(gpio_usage_count & (0x1 << gpio))))
- return -EPERM;
-
base = REG_GPIO_EDR1 + c_bnk;
- if (edge & TWL4030_GPIO_EDGE_RISING)
+ if (edge & IRQ_TYPE_EDGE_RISING)
c_msk |= MASK_GPIO_EDR1_GPIOxRISING(c_off);
-
- if (edge & TWL4030_GPIO_EDGE_FALLING)
+ if (edge & IRQ_TYPE_EDGE_FALLING)
c_msk |= MASK_GPIO_EDR1_GPIOxFALLING(c_off);
mutex_lock(&gpio_lock);
ret = gpio_twl4030_read(base);
if (ret >= 0) {
/* clear the previous rising/falling values */
- reg =
- (u8) (ret &
- ~(MASK_GPIO_EDR1_GPIOxFALLING(c_off) |
- MASK_GPIO_EDR1_GPIOxRISING(c_off)));
+ reg = (u8) ret;
+ reg &= ~( MASK_GPIO_EDR1_GPIOxFALLING(c_off)
+ | MASK_GPIO_EDR1_GPIOxRISING(c_off));
reg |= c_msk;
ret = gpio_twl4030_write(base, reg);
}
mutex_unlock(&gpio_lock);
return ret;
}
-EXPORT_SYMBOL(twl4030_set_gpio_edge_ctrl);
/*
* Configure debounce timing value for a GPIO pin on TWL4030
@@ -652,7 +642,7 @@ static int twl4030_gpio_unmask_thread(void *data)
gpio_trigger;
gpio_trigger >>= 1, irq++) {
struct irq_desc *desc;
- unsigned type, edge;
+ unsigned type;
if (!(gpio_trigger & 0x1))
continue;
@@ -662,19 +652,7 @@ static int twl4030_gpio_unmask_thread(void *data)
type = desc->status & IRQ_TYPE_SENSE_MASK;
spin_unlock_irq(&desc->lock);
- switch (type) {
- case IRQ_TYPE_EDGE_RISING:
- edge = TWL4030_GPIO_EDGE_RISING;
- break;
- case IRQ_TYPE_EDGE_FALLING:
- edge = TWL4030_GPIO_EDGE_FALLING;
- break;
- default:
- edge = TWL4030_GPIO_EDGE_RISING
- | TWL4030_GPIO_EDGE_FALLING;
- break;
- }
- twl4030_set_gpio_edge_ctrl(irq, edge);
+ twl4030_set_gpio_edge_ctrl(irq, type);
}
local_irq_disable();
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 7744669..4f5c0ab 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -918,7 +918,9 @@ static int __init omap_mmc_probe(struct platform_device *pdev)
/* Request IRQ for card detect */
if ((mmc_slot(host).card_detect_irq) && (mmc_slot(host).card_detect)) {
ret = request_irq(mmc_slot(host).card_detect_irq,
- omap_mmc_cd_handler, IRQF_DISABLED,
+ omap_mmc_cd_handler,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING
+ | IRQF_DISABLED,
mmc_hostname(mmc), host);
if (ret) {
dev_dbg(mmc_dev(host->mmc),
diff --git a/include/linux/i2c/twl4030.h b/include/linux/i2c/twl4030.h
index 1c79c89..f26fda1 100644
--- a/include/linux/i2c/twl4030.h
+++ b/include/linux/i2c/twl4030.h
@@ -149,9 +149,6 @@ struct twl4030_platform_data {
#define TWL4030_GPIO_PULL_UP 0
#define TWL4030_GPIO_PULL_DOWN 1
#define TWL4030_GPIO_PULL_NONE 2
-#define TWL4030_GPIO_EDGE_NONE 0
-#define TWL4030_GPIO_EDGE_RISING 1
-#define TWL4030_GPIO_EDGE_FALLING 2
/* Functions to read and write from TWL4030 */
@@ -177,7 +174,6 @@ int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, u8 num_bytes);
*/
int twl4030_get_gpio_datain(int gpio);
int twl4030_request_gpio(int gpio);
-int twl4030_set_gpio_edge_ctrl(int gpio, int edge);
int twl4030_set_gpio_debounce(int gpio, int enable);
int twl4030_free_gpio(int gpio);
--
1.6.0.2.307.gc427
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
