Here are some more cleanups to consider including ... these
should apply on top of all nine patches.
======= SNIP HERE!
Provide detailed diagnostics in add_children() when DEBUG is
defined ... and fix the non-DEBUG message to include minimal
status, and not appear unless there was actually an error.
Update the IRQ message; have it match what the GPIO subchip
says, and as a precaution, make it only appear if the IRQs
have been initialized.
--- beagle.orig/drivers/i2c/chips/twl4030-core.c
+++ beagle/drivers/i2c/chips/twl4030-core.c
@@ -677,6 +677,9 @@ static int add_children(struct twl4030_p
status = platform_device_add_data(pdev, pdata->keypad,
sizeof(*pdata->keypad));
if (status < 0) {
+ dev_dbg(&twl->client->dev,
+ "can't add keypad data, %d\n",
+ status);
platform_device_put(pdev);
goto err;
}
@@ -684,6 +687,7 @@ static int add_children(struct twl4030_p
if (status < 0)
platform_device_put(pdev);
} else {
+ pr_debug("%s: can't alloc keypad dev\n", DRIVER_NAME);
status = -ENOMEM;
goto err;
}
@@ -693,8 +697,10 @@ static int add_children(struct twl4030_p
twl = &twl4030_modules[TWL4030_SLAVENUM_NUM1];
pdev = platform_device_alloc("twl4030_gpio", -1);
- if (!pdev)
+ if (!pdev) {
+ pr_debug("%s: can't alloc gpio dev\n", DRIVER_NAME);
status = -ENOMEM;
+ }
/* more driver model init */
if (status == 0) {
@@ -703,6 +709,10 @@ static int add_children(struct twl4030_p
status = platform_device_add_data(pdev, pdata->gpio,
sizeof(*pdata->gpio));
+ if (status < 0)
+ dev_dbg(&twl->client->dev,
+ "can't add gpio data, %d\n",
+ status);
}
/* GPIO module IRQ */
@@ -737,12 +747,16 @@ static int add_children(struct twl4030_p
sizeof(*pdata->madc));
if (status < 0) {
platform_device_put(pdev);
+ dev_dbg(&twl->client->dev,
+ "can't add madc data, %d\n",
+ status);
goto err;
}
status = platform_device_add(pdev);
if (status < 0)
platform_device_put(pdev);
} else {
+ pr_debug("%s: can't alloc madc dev\n", DRIVER_NAME);
status = -ENOMEM;
goto err;
}
@@ -788,19 +802,24 @@ static int add_children(struct twl4030_p
sizeof(*pdata->usb));
if (status < 0) {
platform_device_put(pdev);
+ dev_dbg(&twl->client->dev,
+ "can't add usb data, %d\n",
+ status);
goto err;
}
status = platform_device_add(pdev);
if (status < 0)
platform_device_put(pdev);
} else {
+ pr_debug("%s: can't alloc usb dev\n", DRIVER_NAME);
status = -ENOMEM;
goto err;
}
}
err:
- pr_err("failed to add twl4030's children\n");
+ if (status)
+ pr_err("failed to add twl4030's children (status %d)\n", status);
return status;
}
@@ -1084,13 +1103,12 @@ twl4030_probe(struct i2c_client *client,
&& twl4030_irq_base == 0
&& client->irq
&& pdata->irq_base
- && pdata->irq_end > pdata->irq_base)
+ && pdata->irq_end > pdata->irq_base) {
twl_init_irq(client->irq, pdata->irq_base, pdata->irq_end);
+ dev_info(&client->dev, "IRQ %d chains IRQs %d..%d\n",
+ client->irq, pdata->irq_base, pdata->irq_end - 1);
+ }
- dev_info(&client->dev, "chaining %d irqs\n",
- twl4030_irq_base
- ? (pdata->irq_end - pdata->irq_base)
- : 0);
return 0;
fail:
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
