On Friday 26 September 2008, Felipe Balbi wrote:
> arch/arm/mach-omap2/board-omap3beagle.c | 6 +
> arch/arm/mach-omap2/board-overo.c | 6 +
For the record: this reverts those two little evil additions;
build fix, and correctness update for at least Beagle.
Steve, if Overo wires out any of the ADC channels on that
one connector, you may want to come up with a better fox.
- Dave
====== SNIP!
--- beagle.orig/arch/arm/mach-omap2/board-omap3beagle.c 2008-09-26 12:47:36.000000000 -0700
+++ beagle/arch/arm/mach-omap2/board-omap3beagle.c 2008-09-26 09:55:50.000000000 -0700
@@ -114,11 +114,6 @@ static struct twl4030_usb_data beagle_us
.usb_mode = T2_USB_MODE_ULPI,
};
-static struct twl4030_madc_platform_data beagle_madc_data = {
- .imr = TWL4030_MADC_IMR1,
- .isr = TWL4030_MADC_ISR1,
-};
-
static struct twl4030_gpio_platform_data beagle_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
@@ -135,7 +130,6 @@ static struct twl4030_platform_data beag
.irq_end = TWL4030_IRQ_END,
/* platform_data for children goes here */
- .madc = &beagle_madc_data,
.usb = &beagle_usb_data,
.gpio = &beagle_gpio_data,
};
--- beagle.orig/arch/arm/mach-omap2/board-overo.c 2008-09-26 12:47:36.000000000 -0700
+++ beagle/arch/arm/mach-omap2/board-overo.c 2008-09-26 10:02:29.000000000 -0700
@@ -152,16 +152,10 @@ static struct twl4030_gpio_platform_data
.irq_end = TWL4030_GPIO_IRQ_END,
};
-static struct twl4030_madc_platform_data overo_madc_data = {
- .imr = TWL4030_MADC_IMR1,
- .isr = TWL4030_MADC_ISR1,
-};
-
static struct twl4030_platform_data overo_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
.gpio = &overo_gpio_data,
- .madc = &overo_madc_data,
};
static struct i2c_board_info __initdata overo_i2c_boardinfo[] = {
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
