For boards with twl4030/tps65950 chips, update board setup code to
provide the appropriate board info.
This should evolve a bunch more over time; right now too much of this
data is globally defined (like IRQ and GPIO numbering).
Signed-off-by: David Brownell <dbrownell@xxxxxxxxxxxxxxxxxxxxx>
---
NOTE: run-tested only on Beagle so far.
arch/arm/mach-omap2/board-2430sdp.c | 21 ++++++++++++++++-----
arch/arm/mach-omap2/board-3430sdp.c | 17 ++++++++++++++++-
arch/arm/mach-omap2/board-ldp.c | 17 ++++++++++++++++-
arch/arm/mach-omap2/board-omap2evm.c | 21 ++++++++++++++++-----
arch/arm/mach-omap2/board-omap3beagle.c | 19 ++++++++++++++++++-
arch/arm/mach-omap2/board-omap3evm.c | 22 +++++++++++++++++++---
arch/arm/mach-omap2/board-overo.c | 20 +++++++++++++++++++-
7 files changed, 120 insertions(+), 17 deletions(-)
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -353,14 +353,25 @@ static struct omap_board_config_kernel s
{OMAP_TAG_SERIAL_CONSOLE, &sdp2430_serial_console_config},
};
+static struct twl4030_platform_data sdp2430_twldata = {
+ .irq_base = TWL4030_IRQ_BASE,
+ .irq_end = TWL4030_IRQ_END,
+};
+
+static struct i2c_board_info __initdata sdp2430_i2c_boardinfo[] = {
+ {
+ I2C_BOARD_INFO("twl4030", 0x48),
+ .flags = I2C_CLIENT_WAKE,
+ .irq = INT_24XX_SYS_NIRQ,
+ .platform_data = &sdp2430_twldata,
+ },
+};
+
static int __init omap2430_i2c_init(void)
{
- /*
- * Registering bus 2 first to avoid twl4030 misbehaving as 2430SDP
- * has twl4030 on bus 2
- */
- omap_register_i2c_bus(2, 2600, NULL, 0);
omap_register_i2c_bus(1, 400, NULL, 0);
+ omap_register_i2c_bus(2, 2600, sdp2430_i2c_boardinfo,
+ ARRAY_SIZE(sdp2430_i2c_boardinfo));
return 0;
}
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -309,9 +309,24 @@ static struct omap_board_config_kernel s
{ OMAP_TAG_LCD, &sdp3430_lcd_config },
};
+static struct twl4030_platform_data sdp3430_twldata = {
+ .irq_base = TWL4030_IRQ_BASE,
+ .irq_end = TWL4030_IRQ_END,
+};
+
+static struct i2c_board_info __initdata sdp3430_i2c_boardinfo[] = {
+ {
+ I2C_BOARD_INFO("twl4030", 0x48),
+ .flags = I2C_CLIENT_WAKE,
+ .irq = INT_34XX_SYS_NIRQ,
+ .platform_data = &sdp3430_twldata,
+ },
+};
+
static int __init omap3430_i2c_init(void)
{
- omap_register_i2c_bus(1, 2600, NULL, 0);
+ omap_register_i2c_bus(1, 2600, sdp3430_i2c_boardinfo,
+ ARRAY_SIZE(sdp3430_i2c_boardinfo));
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, NULL, 0);
return 0;
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -183,9 +183,24 @@ static struct omap_board_config_kernel l
{ OMAP_TAG_UART, &ldp_uart_config },
};
+static struct twl4030_platform_data ldp_twldata = {
+ .irq_base = TWL4030_IRQ_BASE,
+ .irq_end = TWL4030_IRQ_END,
+};
+
+static struct i2c_board_info __initdata ldp_i2c_boardinfo[] = {
+ {
+ I2C_BOARD_INFO("twl4030", 0x48),
+ .flags = I2C_CLIENT_WAKE,
+ .irq = INT_34XX_SYS_NIRQ,
+ .platform_data = &ldp_twldata,
+ },
+};
+
static int __init omap_i2c_init(void)
{
- omap_register_i2c_bus(1, 2600, NULL, 0);
+ omap_register_i2c_bus(1, 2600, ldp_i2c_boardinfo,
+ ARRAY_SIZE(ldp_i2c_boardinfo));
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, NULL, 0);
return 0;
--- a/arch/arm/mach-omap2/board-omap2evm.c
+++ b/arch/arm/mach-omap2/board-omap2evm.c
@@ -234,14 +234,25 @@ static struct omap_board_config_kernel o
{ OMAP_TAG_LCD, &omap2_evm_lcd_config },
};
+static struct twl4030_platform_data omap2evm_twldata = {
+ .irq_base = TWL4030_IRQ_BASE,
+ .irq_end = TWL4030_IRQ_END,
+};
+
+static struct i2c_board_info __initdata omap2evm_i2c_boardinfo[] = {
+ {
+ I2C_BOARD_INFO("twl4030", 0x48),
+ .flags = I2C_CLIENT_WAKE,
+ .irq = INT_24XX_SYS_NIRQ,
+ .platform_data = &omap2evm_twldata,
+ },
+};
+
static int __init omap2_evm_i2c_init(void)
{
- /*
- * Registering bus 2 first to avoid twl4030 misbehaving as OMAP2EVM
- * has twl4030 on bus 2
- */
- omap_register_i2c_bus(2, 2600, NULL, 0);
omap_register_i2c_bus(1, 400, NULL, 0);
+ omap_register_i2c_bus(2, 2600, omap2evm_i2c_boardinfo,
+ ARRAY_SIZE(omap2evm_i2c_boardinfo));
return 0;
}
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -24,6 +24,8 @@
#include <linux/input.h>
#include <linux/gpio_keys.h>
+#include <linux/i2c/twl4030.h>
+
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand.h>
@@ -108,9 +110,24 @@ static struct omap_uart_config omap3_bea
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
+static struct twl4030_platform_data beagle_twldata = {
+ .irq_base = TWL4030_IRQ_BASE,
+ .irq_end = TWL4030_IRQ_END,
+};
+
+static struct i2c_board_info __initdata beagle_i2c_boardinfo[] = {
+ {
+ I2C_BOARD_INFO("twl4030", 0x48),
+ .flags = I2C_CLIENT_WAKE,
+ .irq = INT_34XX_SYS_NIRQ,
+ .platform_data = &beagle_twldata,
+ },
+};
+
static int __init omap3_beagle_i2c_init(void)
{
- omap_register_i2c_bus(1, 2600, NULL, 0);
+ omap_register_i2c_bus(1, 2600, beagle_i2c_boardinfo,
+ ARRAY_SIZE(beagle_i2c_boardinfo));
#ifdef CONFIG_I2C2_OMAP_BEAGLE
omap_register_i2c_bus(2, 400, NULL, 0);
#endif
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -20,6 +20,9 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/input.h>
+
+#include <linux/i2c/twl4030.h>
+
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
@@ -27,8 +30,6 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <linux/io.h>
-#include <linux/delay.h>
#include <mach/gpio.h>
#include <mach/keypad.h>
@@ -88,9 +89,24 @@ static struct omap_uart_config omap3_evm
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
+static struct twl4030_platform_data omap3evm_twldata = {
+ .irq_base = TWL4030_IRQ_BASE,
+ .irq_end = TWL4030_IRQ_END,
+};
+
+static struct i2c_board_info __initdata omap3evm_i2c_boardinfo[] = {
+ {
+ I2C_BOARD_INFO("twl4030", 0x48),
+ .flags = I2C_CLIENT_WAKE,
+ .irq = INT_34XX_SYS_NIRQ,
+ .platform_data = &omap3evm_twldata,
+ },
+};
+
static int __init omap3_evm_i2c_init(void)
{
- omap_register_i2c_bus(1, 2600, NULL, 0);
+ omap_register_i2c_bus(1, 2600, omap3evm_i2c_boardinfo,
+ ARRAY_SIZE(omap3evm_i2c_boardinfo));
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, NULL, 0);
return 0;
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -26,6 +26,9 @@
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
+
+#include <linux/i2c/twl4030.h>
+
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
@@ -143,9 +146,24 @@ static struct omap_uart_config overo_uar
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
+static struct twl4030_platform_data overo_twldata = {
+ .irq_base = TWL4030_IRQ_BASE,
+ .irq_end = TWL4030_IRQ_END,
+};
+
+static struct i2c_board_info __initdata overo_i2c_boardinfo[] = {
+ {
+ I2C_BOARD_INFO("twl4030", 0x48),
+ .flags = I2C_CLIENT_WAKE,
+ .irq = INT_34XX_SYS_NIRQ,
+ .platform_data = &overo_twldata,
+ },
+};
+
static int __init overo_i2c_init(void)
{
- omap_register_i2c_bus(1, 2600, NULL, 0);
+ omap_register_i2c_bus(1, 2600, overo_i2c_boardinfo,
+ ARRAY_SIZE(overo_i2c_boardinfo));
/* i2c2 pins are used for gpio */
omap_register_i2c_bus(3, 400, NULL, 0);
return 0;
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
