>> >> Great, that's helpful. Do you know omapzoom linux-2.6.25 to be >> somewhat functional with OMAP 35x EVM, or would you suggest going with >> something newer like v2.6.26-ti-07252008? Or must I go to 2.6.27-rc3? >> I assume newer (to a point) would result in better stability on the >> 35x EVM? > > On omapzoom.org, I try to test for functionality complete and working for primarily LDP board and also 3430SDP. I have not tested the EVM stuff. > > I just completed up merging omapzoom tree to 2.6.27rc6 on branch: branch_2.6.27rc6_migration > You could have a look at it if that helps. > I tried the rc6_migration branch, and after a few hiccups got it basically running. However, seeing two problems - one is minor at this point but the other is a real issue. #1 (minor) - I'm seeing the following and can't figure out why... --- DSS:clk set: ask=124000000, tgt=104000000, sup=96000000 Unable to set the DSSfunctional clock to 96000000 UNABLE to enable dss TV fclk --- any ideas? #2 - when any key is pressed on the 35x EVM, I get the following output continuously... TWL4030 module irq 369 is disabled but can't be masked! TWL4030 module irq 369 is disabled but can't be masked! ... Though it sounds like no one is testing this code against a 35x EVM, I'm still hoping someone may have a clue about what is going wrong here. Thanks, twebb -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
