From: David Brownell <dbrownell@xxxxxxxxxxxxxxxxxxxxx> Clean up the Beagle NAND config a bit: use SZ_128K instead of an arithmetic expression for the NAND block size. Set the NAND_BUSWIDTH_16 flag. Make its init routine static. (Unrelated: make omap3_beagle_i2c_init be part of beagle_init. It shouldn't be called on non-beagle hardware; and beagle_init already runs with other arch_initcall code.) Signed-off-by: David Brownell <dbrownell@xxxxxxxxxxxxxxxxxxxxx> --- arch/arm/mach-omap2/board-omap3beagle.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) --- beagle.orig/arch/arm/mach-omap2/board-omap3beagle.c 2008-08-27 21:19:12.000000000 -0700 +++ beagle/arch/arm/mach-omap2/board-omap3beagle.c 2008-08-27 21:21:18.000000000 -0700 @@ -50,24 +50,24 @@ static struct mtd_partition omap3beagle_ { .name = "X-Loader", .offset = 0, - .size = 4*(64 * 2048), + .size = 4 * SZ_128K, .mask_flags = MTD_WRITEABLE, /* force read-only */ }, { .name = "U-Boot", .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */ - .size = 15*(64 * 2048), + .size = 15 * SZ_128K, .mask_flags = MTD_WRITEABLE, /* force read-only */ }, { .name = "U-Boot Env", .offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */ - .size = 1*(64 * 2048), + .size = 1 * SZ_128K, }, { .name = "Kernel", .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */ - .size = 32*(64 * 2048), + .size = 32 * SZ_128K, }, { .name = "File System", @@ -77,6 +77,7 @@ static struct mtd_partition omap3beagle_ }; static struct omap_nand_platform_data omap3beagle_nand_data = { + .options = NAND_BUSWIDTH_16, .parts = omap3beagle_nand_partitions, .nr_parts = ARRAY_SIZE(omap3beagle_nand_partitions), .dma_channel = -1, /* disable DMA in OMAP NAND driver */ @@ -205,7 +206,7 @@ static struct platform_device *omap3_bea &keys_gpio, }; -void __init omap3beagle_flash_init(void) +static void __init omap3beagle_flash_init(void) { u8 cs = 0; u8 nandcs = GPMC_CS_NUM + 1; @@ -245,6 +246,7 @@ void __init omap3beagle_flash_init(void) static void __init omap3_beagle_init(void) { + omap3_beagle_i2c_init(); platform_add_devices(omap3_beagle_devices, ARRAY_SIZE(omap3_beagle_devices)); omap_board_config = omap3_beagle_config; omap_board_config_size = ARRAY_SIZE(omap3_beagle_config); @@ -255,8 +257,6 @@ static void __init omap3_beagle_init(voi omap3beagle_flash_init(); } -arch_initcall(omap3_beagle_i2c_init); - static void __init omap3_beagle_map_io(void) { omap2_set_globals_343x(); -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html