From: Teerth Reddy <teerth@xxxxxx>
Add kconfig support for HW ECC for nand driver on OMAP3
Signed-off-by: Teerth Reddy <teerth@xxxxxx>
---
drivers/mtd/nand/Kconfig | 10 ++++++++++
1 files changed, 10 insertions(+)
Index : linux-omap-2.6/drivers/mtd/nand/Kconfig
==================================================================================
--- a/drivers/mtd/nand/Kconfig 2008-08-25 10:26:51.708901000 +0530
+++ b/drivers/mtd/nand/Kconfig 2008-08-25 10:28:12.820012000 +0530
@@ -74,6 +74,16 @@ config MTD_NAND_OMAP2
help
Support for NAND flash on Texas Instruments OMAP2 and OMAP3 platforms.
+config MTD_NAND_OMAP_HWECC
+ bool "The Hardware ECC support"
+ depends on MTD_NAND && MTD_NAND_OMAP2
+ default n
+ help
+ The ECC compuatation for the data to be written/read can be either by
+ software or omap has Hw ecc engine which calculates it.
+ MTD_NAND_OMAP_HWECC = y which enables the hw ecc
+ MTD_NAND_OMAP_HWECC = n enables software ecc
+
config MTD_NAND_OMAP
tristate "NAND Flash device on OMAP H3/H2/P2 boards"
depends on ARM && ARCH_OMAP1 && MTD_NAND && (MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_PERSEUS2)
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
