* Kalle Jokiniemi <ext-kalle.jokiniemi@xxxxxxxxx> [080807 13:10]:
> Hi Tony,
>
> This patch should be safe to apply now as the sys off mode pin polarity
> was fixed in the patch "Add early init for voltage controller
> configuration and off mode polarity" (index a6cfc46..fc72c11 100644).
>
> I compile & boot tested it on SDP board, on both plain master branch and
> with Jouni's workarounds. Works for me.
Hmm, just to confirm... Isn't this one already applied modified with
commits 07667f11a9864671bcec35dd0ee36e47cb3f675c and
3238fb156cf77b537b2df8d897fe62a7feab4939? Can you please check and
let me know if something still needs to be patched.
Thanks,
Tony
>
> regards,
> Kalle
>
> On ma, 2008-07-21 at 19:17 +0300, ext Peter 'p2' De Schrijver wrote:
> > Signed-off-by: Peter 'p2' De Schrijver <peter.de-schrijver@xxxxxxxxx>
> > ---
> > drivers/i2c/chips/Makefile | 2 +-
> > drivers/i2c/chips/twl4030-power.c | 337 +++++++++++++++++++++++++++++++++++++
> > 2 files changed, 338 insertions(+), 1 deletions(-)
> > create mode 100644 drivers/i2c/chips/twl4030-power.c
> >
> > diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
> > index 1f81ebd..a44e617 100644
> > --- a/drivers/i2c/chips/Makefile
> > +++ b/drivers/i2c/chips/Makefile
> > @@ -23,7 +23,7 @@ obj-$(CONFIG_GPIOEXPANDER_OMAP) += gpio_expander_omap.o
> > obj-$(CONFIG_MENELAUS) += menelaus.o
> > obj-$(CONFIG_SENSORS_TSL2550) += tsl2550.o
> > obj-$(CONFIG_SENSORS_TSL2563) += tsl2563.o
> > -obj-$(CONFIG_TWL4030_CORE) += twl4030-core.o twl4030-pwrirq.o
> > +obj-$(CONFIG_TWL4030_CORE) += twl4030-core.o twl4030-pwrirq.o twl4030-power.o
> > obj-$(CONFIG_TWL4030_GPIO) += twl4030-gpio.o
> > obj-$(CONFIG_TWL4030_USB) += twl4030-usb.o
> > obj-$(CONFIG_TWL4030_POWEROFF) += twl4030-poweroff.o
> > diff --git a/drivers/i2c/chips/twl4030-power.c b/drivers/i2c/chips/twl4030-power.c
> > new file mode 100644
> > index 0000000..195c3c4
> > --- /dev/null
> > +++ b/drivers/i2c/chips/twl4030-power.c
> > @@ -0,0 +1,337 @@
> > +/*
> > + * linux/drivers/i2c/chips/twl4030-power.c
> > + *
> > + * Handle TWL4030 Power initialization
> > + *
> > + * Copyright (C) 2008 Nokia Corporation
> > + * Copyright (C) 2006 Texas Instruments, Inc
> > + *
> > + * Written by Kalle Jokiniemi
> > + * Peter De Schrijver <peter.de-schrijver@xxxxxxxxx>
> > + *
> > + * This file is subject to the terms and conditions of the GNU General
> > + * Public License. See the file "COPYING" in the main directory of this
> > + * archive for more details.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + *
> > + * You should have received a copy of the GNU General Public License
> > + * along with this program; if not, write to the Free Software
> > + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
> > + */
> > +
> > +#include <linux/module.h>
> > +#include <linux/pm.h>
> > +#include <linux/i2c/twl4030.h>
> > +
> > +#define PWR_P1_SW_EVENTS 0x10
> > +#define PWR_DEVOFF (1<<0)
> > +
> > +#define PHY_TO_OFF_PM_MASTER(p) (p - 0x36)
> > +#define PHY_TO_OFF_PM_RECIEVER(p) (p - 0x5b)
> > +
> > +/* resource - hfclk */
> > +#define R_HFCLKOUT_DEV_GRP PHY_TO_OFF_PM_RECIEVER(0xe6)
> > +
> > +/* PM events */
> > +#define R_P1_SW_EVENTS PHY_TO_OFF_PM_MASTER(0x46)
> > +#define R_P2_SW_EVENTS PHY_TO_OFF_PM_MASTER(0x47)
> > +#define R_P3_SW_EVENTS PHY_TO_OFF_PM_MASTER(0x48)
> > +#define R_CFG_P1_TRANSITION PHY_TO_OFF_PM_MASTER(0x36)
> > +#define R_CFG_P2_TRANSITION PHY_TO_OFF_PM_MASTER(0x37)
> > +#define R_CFG_P3_TRANSITION PHY_TO_OFF_PM_MASTER(0x38)
> > +
> > +#define LVL_WAKEUP 0x08
> > +
> > +#define ENABLE_WARMRESET (1<<4)
> > +
> > +/* sequence script */
> > +
> > +#define END_OF_SCRIPT 0x3f
> > +
> > +#define R_SEQ_ADD_A2S PHY_TO_OFF_PM_MASTER(0x55)
> > +#define R_SEQ_ADD_SA12 PHY_TO_OFF_PM_MASTER(0x56)
> > +#define R_SEQ_ADD_S2A3 PHY_TO_OFF_PM_MASTER(0x57)
> > +#define R_SEQ_ADD_WARM PHY_TO_OFF_PM_MASTER(0x58)
> > +#define R_MEMORY_ADDRESS PHY_TO_OFF_PM_MASTER(0x59)
> > +#define R_MEMORY_DATA PHY_TO_OFF_PM_MASTER(0x5a)
> > +
> > +/* Power bus message definitions */
> > +
> > +#define DEV_GRP_NULL 0x0
> > +#define DEV_GRP_P1 0x1
> > +#define DEV_GRP_P2 0x2
> > +#define DEV_GRP_P3 0x4
> > +
> > +#define RES_GRP_RES 0x0
> > +#define RES_GRP_PP 0x1
> > +#define RES_GRP_RC 0x2
> > +#define RES_GRP_PP_RC 0x3
> > +#define RES_GRP_PR 0x4
> > +#define RES_GRP_PP_PR 0x5
> > +#define RES_GRP_RC_PR 0x6
> > +#define RES_GRP_ALL 0x7
> > +
> > +#define RES_TYPE2_R0 0x0
> > +
> > +#define RES_TYPE_ALL 0x7
> > +
> > +#define RES_STATE_WRST 0xF
> > +#define RES_STATE_ACTIVE 0xE
> > +#define RES_STATE_SLEEP 0x8
> > +#define RES_STATE_OFF 0x0
> > +
> > +/*
> > +* Power Bus Message Format
> > +*
> > +* Broadcast Message (16 Bits)
> > +* DEV_GRP[15:13] MT[12] RES_GRP[11:9] RES_TYPE2[8:7] RES_TYPE[6:4]
> > +* RES_STATE[3:0]
> > +*
> > +* Singular Message (16 Bits)
> > +* DEV_GRP[15:13] MT[12] RES_ID[11:4] RES_STATE[3:0]
> > +*
> > +*/
> > +
> > +#define MSG_BROADCAST(devgrp, grp, type, type2, state) \
> > + (devgrp << 13 | 1 << 12 | grp << 9 | type2 << 7 | type << 4 | state)
> > +
> > +#define MSG_SINGULAR(devgrp, id, state) \
> > + (devgrp << 13 | 0 << 12 | id << 4 | state)
> > +
> > +#define R_PROTECT_KEY 0x0E
> > +#define KEY_1 0xC0
> > +#define KEY_2 0x0C
> > +
> > +struct triton_ins {
> > + u16 pmb_message;
> > + u8 delay;
> > +};
> > +
> > +
> > +#define CONFIG_DISABLE_HFCLK 1
> > +
> > +#if defined(CONFIG_MACH_OMAP_3430SDP) || defined(CONFIG_MACH_OMAP_3430LABRADOR)
> > +
> > +struct triton_ins sleep_on_seq[] __initdata = {
> > + {MSG_SINGULAR(DEV_GRP_P1, 0xf, RES_STATE_OFF), 4},
> > + {MSG_SINGULAR(DEV_GRP_P1, 0x10, RES_STATE_OFF), 2},
> > +#ifdef CONFIG_DISABLE_HFCLK
> > + {MSG_SINGULAR(DEV_GRP_P1, 0x7, RES_STATE_OFF), 3},
> > + {MSG_SINGULAR(DEV_GRP_P1, 0x19, RES_STATE_OFF), 3},
> > +#endif /* #ifdef CONFIG_DISABLE_HFCLK */
> > +};
> > +
> > +struct triton_ins sleep_off_seq[] __initdata = {
> > +#ifndef CONFIG_DISABLE_HFCLK
> > + {MSG_SINGULAR(DEV_GRP_P1, 0xf, RES_STATE_ACTIVE), 4},
> > + {MSG_SINGULAR(DEV_GRP_P1, 0x10, RES_STATE_ACTIVE), 2},
> > +#else
> > + {MSG_SINGULAR(DEV_GRP_P1, 0x7, RES_STATE_ACTIVE), 0x30},
> > + {MSG_SINGULAR(DEV_GRP_P1, 0xf, RES_STATE_ACTIVE), 0x30},
> > + {MSG_SINGULAR(DEV_GRP_P1, 0x10, RES_STATE_ACTIVE), 0x37},
> > + {MSG_SINGULAR(DEV_GRP_P1, 0x19, RES_STATE_ACTIVE), 3},
> > +#endif /* #ifndef CONFIG_DISABLE_HFCLK */
> > +};
> > +
> > +struct triton_ins t2_wrst_seq[] __initdata = {
> > + {MSG_SINGULAR(DEV_GRP_NULL, 0x1b, RES_STATE_OFF), 2},
> > + {MSG_SINGULAR(DEV_GRP_P1, 0xf, RES_STATE_WRST), 15},
> > + {MSG_SINGULAR(DEV_GRP_P1, 0x10, RES_STATE_WRST), 15},
> > + {MSG_SINGULAR(DEV_GRP_P1, 0x7, RES_STATE_WRST), 0x60},
> > + {MSG_SINGULAR(DEV_GRP_P1, 0x19, RES_STATE_ACTIVE), 2},
> > + {MSG_SINGULAR(DEV_GRP_NULL, 0x1b, RES_STATE_ACTIVE), 2},
> > +};
> > +#else
> > +struct triton_ins sleep_on_seq[] __initdata = {
> > + {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_RC, RES_TYPE_ALL, RES_TYPE2_R0,
> > + RES_STATE_SLEEP), 4},
> > + {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, RES_TYPE_ALL, RES_TYPE_R7,
> > + RES_STATE_SLEEP), 4},
> > +};
> > +
> > +struct triton_ins sleep_off_seq[] __initdata = {
> > + {MSG_SINGULAR(DEV_GRP_NULL, 0x17, RES_STATE_ACTIVE), 0x30},
> > + {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_PP_PR, RES_TYPE_ALL, RES_TYPE2_R0,
> > + RES_STATE_ACTIVE), 0x37},
> > + {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, RES_TYPE_ALL, RES_TYPE2_R0,
> > + RES_STATE_ACTIVE), 0x2},
> > +};
> > +#endif
> > +
> > +static int __init twl4030_write_script_byte(u8 address, u8 byte)
> > +{
> > + int err;
> > +
> > + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address,
> > + R_MEMORY_ADDRESS);
> > + err |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, byte,
> > + R_MEMORY_DATA);
> > +
> > + return err;
> > +}
> > +
> > +static int __init twl4030_write_script_ins(u8 address, u16 pmb_message,
> > + u8 delay, u8 next)
> > +{
> > + int err = 0;
> > +
> > + address *= 4;
> > + err |= twl4030_write_script_byte(address++, pmb_message >> 8);
> > + err |= twl4030_write_script_byte(address++, pmb_message & 0xff);
> > + err |= twl4030_write_script_byte(address++, delay);
> > + err |= twl4030_write_script_byte(address++, next);
> > +
> > + return err;
> > +}
> > +
> > +static int __init twl4030_write_script(u8 address, struct triton_ins *script,
> > + int len)
> > +{
> > + int err = 0;
> > +
> > + for (; len; len--, address++, script++) {
> > + if (len == 1)
> > + err |= twl4030_write_script_ins(address,
> > + script->pmb_message,
> > + script->delay,
> > + END_OF_SCRIPT);
> > + else
> > + err |= twl4030_write_script_ins(address,
> > + script->pmb_message,
> > + script->delay,
> > + address + 1);
> > + }
> > +
> > + return err;
> > +}
> > +
> > +static int __init config_sleep_wake_sequence(void)
> > +{
> > + int err = 0;
> > + u8 data;
> > +
> > + /*
> > + * CLKREQ is pulled high on the 2430SDP, therefore, we need to take
> > + * it out of the HFCLKOUT DEV_GRP for P1 else HFCLKOUT can't be stopped.
> > + */
> > +
> > + err |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
> > + 0x20, R_HFCLKOUT_DEV_GRP);
> > +
> > + /* Set ACTIVE to SLEEP SEQ address in T2 memory*/
> > + err |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0x2B,
> > + R_SEQ_ADD_A2S);
> > +
> > + /* Set SLEEP to ACTIVE SEQ address for P1 and P2 */
> > + err |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0x2F,
> > + R_SEQ_ADD_SA12);
> > +
> > + /* Set SLEEP to ACTIVE SEQ address for P3 */
> > + err |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0x2F,
> > + R_SEQ_ADD_S2A3);
> > +
> > + /* Install Active->Sleep (A2S) sequence */
> > + err |= twl4030_write_script(0x2B, sleep_on_seq,
> > + ARRAY_SIZE(sleep_on_seq));
> > +
> > + /* Install Sleep->Active (S2A) sequence */
> > + err |= twl4030_write_script(0x2F, sleep_off_seq,
> > + ARRAY_SIZE(sleep_off_seq));
> > +
> > +#if defined(CONFIG_MACH_OMAP_3430SDP) || defined(CONFIG_MACH_OMAP_3430LABRADOR)
> > + /* Disabling AC charger effect on sleep-active transitions */
> > + err |= twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &data,
> > + R_CFG_P1_TRANSITION);
> > + data &= 0x0;
> > + err |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, data ,
> > + R_CFG_P1_TRANSITION);
> > +#endif
> > + /* P1/P2/P3 LVL_WAKEUP should be on LEVEL */
> > + err |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, LVL_WAKEUP,
> > + R_P1_SW_EVENTS);
> > + err |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, LVL_WAKEUP,
> > + R_P2_SW_EVENTS);
> > + err |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, LVL_WAKEUP,
> > + R_P3_SW_EVENTS);
> > +
> > + if (err)
> > + printk(KERN_ERR "TWL4030 sleep-wake sequence config error\n");
> > +
> > + return err;
> > +}
> > +
> > +
> > +/* Programming the WARMRESET Sequence on TRITON */
> > +static int __init config_warmreset_sequence(void)
> > +{
> > +
> > + int e = 0;
> > + u8 rd_data;
> > +
> > + if (!ARRAY_SIZE(t2_wrst_seq))
> > + return 0;
> > +
> > + /* Set WARM RESET SEQ address for P1 */
> > + e |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0x38,
> > + R_SEQ_ADD_WARM);
> > +
> > + /* Install Warm Reset sequence */
> > + e |= twl4030_write_script(0x38, t2_wrst_seq,
> > + ARRAY_SIZE(t2_wrst_seq));
> > +
> > + /* P1/P2/P3 enable WARMRESET */
> > + e |= twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &rd_data,
> > + R_P1_SW_EVENTS);
> > + rd_data |= ENABLE_WARMRESET;
> > + e |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, rd_data,
> > + R_P1_SW_EVENTS);
> > +
> > + e |= twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &rd_data,
> > + R_P2_SW_EVENTS);
> > + rd_data |= ENABLE_WARMRESET;
> > + e |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, rd_data,
> > + R_P2_SW_EVENTS);
> > +
> > + e |= twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &rd_data,
> > + R_P3_SW_EVENTS);
> > + rd_data |= ENABLE_WARMRESET;
> > + e |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, rd_data,
> > + R_P3_SW_EVENTS);
> > +
> > + if (e)
> > + printk(KERN_ERR
> > + "TWL4030 Power Companion Warmreset seq config error\n");
> > + return e;
> > +}
> > +
> > +static int __init twl4030_power_init(void)
> > +{
> > + int err = 0;
> > +
> > + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, KEY_1,
> > + R_PROTECT_KEY);
> > + err |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, KEY_2,
> > + R_PROTECT_KEY);
> > +
> > + if (err)
> > + return err;
> > +
> > + err = config_sleep_wake_sequence();
> > + if (err)
> > + return err;
> > +
> > + err = config_warmreset_sequence();
> > + if (err)
> > + return err;
> > +
> > + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0, R_PROTECT_KEY);
> > +
> > + return err;
> > +
> > +}
> > +
> > +module_init(twl4030_power_init);
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
