ext Högander Jouni <jouni.hogander@xxxxxxxxx> writes: > Hi, > > One more refreshed PM workaround set. Here are instructions, how to test > them: > > To get Omap into retention, this patch set still depends on: > 1. ARCH: OMAP: MUSB: Do not block sleep (Felipe Balbi) > > Test: > 1. Apply dependency patch and workaround set on top of them > > 2. Enable disabling/enabling of gpio2-6 and uart clocks on idle: > $ echo 1 > /sys/power/clocks_off_while_idle > > 3. Try out static suspend: > $ echo mem > /sys/power/state > Wake up from suspend by entering character to serial console. This > should print out: > "Successfully put all powerdomains to target state" > > 4. Try out dynamic sleep: > $ echo 1 > /sys/power/sleep_while_idle > On Omap3430 SDP board VCORE_EN led can be used as an indicator. If > it starts to blink after a while then Omap enters retention on > idle. To make this work also display needs to be blanked. Please ignore this set. It break 24xx build and patches contains error. Sorry for this. I will send them again soon. -- Jouni Högander -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
