* Tony Lindgren <tony@xxxxxxxxxxx> [080814 16:32]:
> * Felipe Balbi <felipe.balbi@xxxxxxxxx> [080813 20:37]:
> > If we can't reach the driver, we stop trying to probe
> > it. Useful when building kernel for n800 and n810.
> >
> > n800 doesn't have lm8323, so that driver shouldn't probe
> > there.
>
> Pushing today.
Actually this breaks the keyboard on n810 as lm8323_reset() fails
during probe. And I guess n800 should not call probe now at all
as the I2C device is not registered. So I'll revert this for now.
Tony
>
> Tony
>
> > Signed-off-by: Felipe Balbi <felipe.balbi@xxxxxxxxx>
> > ---
> > drivers/input/keyboard/lm8323.c | 42 +++++++++++++++++++++++++++++---------
> > 1 files changed, 32 insertions(+), 10 deletions(-)
> >
> > diff --git a/drivers/input/keyboard/lm8323.c b/drivers/input/keyboard/lm8323.c
> > index 72bb587..3d10a0f 100644
> > --- a/drivers/input/keyboard/lm8323.c
> > +++ b/drivers/input/keyboard/lm8323.c
> > @@ -348,10 +348,10 @@ static void lm8323_process_error(struct lm8323_chip *lm)
> > }
> > }
> >
> > -static void lm8323_reset(struct lm8323_chip *lm)
> > +static int lm8323_reset(struct lm8323_chip *lm)
> > {
> > /* The docs say we must pass 0xAA as the data byte. */
> > - lm8323_write(lm, 2, LM8323_CMD_RESET, 0xAA);
> > + return lm8323_write(lm, 2, LM8323_CMD_RESET, 0xAA);
> > }
> >
> > static int lm8323_configure(struct lm8323_chip *lm)
> > @@ -360,6 +360,7 @@ static int lm8323_configure(struct lm8323_chip *lm)
> > int clock = (CLK_SLOWCLKEN | CLK_RCPWM_EXTERNAL);
> > int debounce = lm->debounce_time >> 2;
> > int active = lm->active_time >> 2;
> > + int ret;
> >
> > /*
> > * Active time must be greater than the debounce time: if it's
> > @@ -368,13 +369,25 @@ static int lm8323_configure(struct lm8323_chip *lm)
> > if (debounce >= active)
> > active = debounce + 3;
> >
> > - lm8323_write(lm, 2, LM8323_CMD_WRITE_CFG, 0);
> > - lm8323_write(lm, 2, LM8323_CMD_WRITE_CLOCK, clock);
> > - lm8323_write(lm, 2, LM8323_CMD_SET_KEY_SIZE, keysize);
> > + ret = lm8323_write(lm, 2, LM8323_CMD_WRITE_CFG, 0);
> > + if (ret)
> > + goto err;
> > + ret = lm8323_write(lm, 2, LM8323_CMD_WRITE_CLOCK, clock);
> > + if (ret)
> > + goto err;
> > + ret = lm8323_write(lm, 2, LM8323_CMD_SET_KEY_SIZE, keysize);
> > + if (ret)
> > + goto err;
> > lm8323_set_active_time(lm, lm->active_time);
> > - lm8323_write(lm, 2, LM8323_CMD_SET_DEBOUNCE, debounce);
> > - lm8323_write(lm, 3, LM8323_CMD_WRITE_PORT_STATE, 0xff, 0xff);
> > - lm8323_write(lm, 3, LM8323_CMD_WRITE_PORT_SEL, 0, 0);
> > + ret = lm8323_write(lm, 2, LM8323_CMD_SET_DEBOUNCE, debounce);
> > + if (ret)
> > + goto err;
> > + ret = lm8323_write(lm, 3, LM8323_CMD_WRITE_PORT_STATE, 0xff, 0xff);
> > + if (ret)
> > + goto err;
> > + ret = lm8323_write(lm, 3, LM8323_CMD_WRITE_PORT_SEL, 0, 0);
> > + if (ret)
> > + goto err;
> >
> > /*
> > * Not much we can do about errors at this point, so just hope
> > @@ -382,6 +395,11 @@ static int lm8323_configure(struct lm8323_chip *lm)
> > */
> >
> > return 0;
> > +
> > +err:
> > + dev_err(&lm->client->dev, "failed to configure lm8323\n");
> > +
> > + return ret;
> > }
> >
> > /*
> > @@ -721,7 +739,9 @@ static int lm8323_probe(struct i2c_client *client,
> > else if (lm->active_time == -1) /* Disable sleep. */
> > lm->active_time = 0;
> >
> > - lm8323_reset(lm);
> > + err = lm8323_reset(lm);
> > + if (err)
> > + goto fail2;
> >
> > /* Nothing's set up to service the IRQ yet, so just spin for max.
> > * 100ms until we can configure. */
> > @@ -738,7 +758,9 @@ static int lm8323_probe(struct i2c_client *client,
> >
> > msleep(1);
> > }
> > - lm8323_configure(lm);
> > + err = lm8323_configure(lm);
> > + if (err)
> > + goto fail2;
> >
> > /* If a true probe check the device */
> > if (lm8323_read_id(lm, data) != 0) {
> > --
> > 1.6.0.rc1.71.gfba5
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> > the body of a message to majordomo@xxxxxxxxxxxxxxx
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
