* Paul Walmsley <paul@xxxxxxxxx> [080813 00:34]: > This series fixes two bugs that cause N800 to panic on boot: > > - a OMAP2xxx clock code bug, which caused an "Unhandled fault: > alignment exception (0x001) at 0xc02....." panic; and > > - an OMAP2/3 clockdomain bug, which caused an "Unable to handle kernel > paging request at virtual address 5f75706d" panic. > > These bugs were exposed by 0e5194e1a84c219bebbb78f305b7a8eabc4a3656 and > 718fc6cd4db902aa2242a736cc3feb8744a4c71a. Great, thanks! Pushing today. > With the following patches applied on git head, N800 boots fine, but > only if CONFIG_DEBUG_LL is enabled. If it is disabled, it hangs at > some point in early boot. Don't know why. Maybe it needs flasher --enable-rd-mode --set-rd-flags=serial-console? > These patches also boot-tested cleanly on 2430SDP and 3430SDP, both > with and without CONFIG_DEBUG_LL. Good Tony > text data bss dec hex filename > 3217805 149808 85008 3452621 34aecd vmlinux.n800.orig > 3217837 149808 85008 3452653 34aeed vmlinux.n800 > > arch/arm/mach-omap2/clock24xx.c | 2 ++ > arch/arm/mach-omap2/clockdomain.c | 6 ++++++ > 2 files changed, 8 insertions(+), 0 deletions(-) > > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
