[PATCH 05/10] OMAP3 SRF: virtual clock nodes for VDD1 and VDD2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The patch defines virtual nodes for VDD1 and VDD2

Signed-off-by: Rajendra Nayak <rnayak@xxxxxx>
---
 arch/arm/mach-omap2/board-3430sdp.c       |   38 +++++
 arch/arm/mach-omap2/clock34xx.c           |  206 +++++++++++++++++++++++++-----
 arch/arm/mach-omap2/clock34xx.h           |   29 ++++
 include/asm-arm/arch-omap/board-3430sdp.h |   35 +++++
 include/asm-arm/arch-omap/clock.h         |    8 +
 5 files changed, 287 insertions(+), 29 deletions(-)

Index: linux-omap-2.6/arch/arm/mach-omap2/clock34xx.h
===================================================================
--- linux-omap-2.6.orig/arch/arm/mach-omap2/clock34xx.h	2008-08-06
14:55:12.000000000 +0530
+++ linux-omap-2.6/arch/arm/mach-omap2/clock34xx.h	2008-08-07
15:07:19.000000000 +0530
@@ -36,6 +36,14 @@ static int omap3_noncore_dpll_enable(str
 static void omap3_noncore_dpll_disable(struct clk *clk);
 static int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate);
 static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate);
+static void omap3_table_recalc(struct clk *clk);
+static long omap3_round_to_table_rate(struct clk *clk, unsigned long rate);
+static int omap3_select_table_rate(struct clk *clk, unsigned long rate);
+
+extern struct vdd_prcm_config vdd1_rate_table[];
+extern struct vdd_prcm_config vdd2_rate_table[];
+extern struct vdd_prcm_config iva2_rate_table[];
+

 /* Maximum DPLL multiplier, divider values for OMAP3 */
 #define OMAP3_MAX_DPLL_MULT		2048
@@ -3064,6 +3072,24 @@ static struct clk wdt1_fck = {
 	.recalc		= &followparent_recalc,
 };

+static struct clk virt_vdd1_prcm_set = {
+	.name = "virt_vdd1_prcm_set",
+	.flags = CLOCK_IN_OMAP343X | VIRTUAL_CLOCK | ALWAYS_ENABLED,
+	.parent = &mpu_ck, /* Indexed by mpu speed, no parent */
+	.recalc = &omap3_table_recalc, /*sets are keyed on mpu rate */
+	.set_rate = &omap3_select_table_rate,
+	.round_rate = &omap3_round_to_table_rate,
+};
+
+static struct clk virt_vdd2_prcm_set = {
+	.name = "virt_vdd2_prcm_set",
+	.flags = CLOCK_IN_OMAP343X | VIRTUAL_CLOCK | ALWAYS_ENABLED,
+	.parent = &core_ck,
+	.recalc = &omap3_table_recalc,
+	.set_rate = &omap3_select_table_rate,
+	.round_rate = &omap3_round_to_table_rate,
+};
+
 static struct clk *onchip_34xx_clks[] __initdata = {
 	&omap_32k_fck,
 	&virt_12m_ck,
@@ -3276,6 +3302,9 @@ static struct clk *onchip_34xx_clks[] __
 	&secure_32k_fck,
 	&gpt12_fck,
 	&wdt1_fck,
+	/* virtual group clock */
+	&virt_vdd1_prcm_set,
+	&virt_vdd2_prcm_set,
 };

 #endif
Index: linux-omap-2.6/arch/arm/mach-omap2/clock34xx.c
===================================================================
--- linux-omap-2.6.orig/arch/arm/mach-omap2/clock34xx.c	2008-08-07
14:34:23.000000000 +0530
+++ linux-omap-2.6/arch/arm/mach-omap2/clock34xx.c	2008-08-07
15:07:19.000000000 +0530
@@ -25,6 +25,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/limits.h>
+#include <linux/err.h>

 #include <asm/arch/clock.h>
 #include <asm/arch/sram.h>
@@ -45,6 +46,32 @@

 #define MAX_DPLL_WAIT_TRIES		1000000

+struct vdd_prcm_config *curr_vdd1_prcm_set;
+struct vdd_prcm_config *curr_vdd2_prcm_set;
+static struct clk *dpll1_clk, *dpll2_clk, *dpll3_clk;
+
+#ifndef CONFIG_CPU_FREQ
+static unsigned long compute_lpj(unsigned long ref, u_int div, u_int mult)
+{
+	unsigned long new_jiffy_l, new_jiffy_h;
+
+	/*
+	 * Recalculate loops_per_jiffy.  We do it this way to
+	 * avoid math overflow on 32-bit machines.  Maybe we
+	 * should make this architecture dependent?  If you have
+	 * a better way of doing this, please replace!
+	 *
+	 *    new = old * mult / div
+	 */
+	new_jiffy_h = ref / div;
+	new_jiffy_l = (ref % div) / 100;
+	new_jiffy_h *= mult;
+	new_jiffy_l = new_jiffy_l * mult / div;
+
+	return new_jiffy_h + new_jiffy_l * 100;
+}
+#endif
+
 /**
  * omap3_dpll_recalc - recalculate DPLL rate
  * @clk: DPLL struct clk
@@ -644,15 +671,6 @@ void omap2_clk_prepare_for_reboot(void)
  */
 static int __init omap2_clk_arch_init(void)
 {
-	if (!mpurate)
-		return -EINVAL;
-
-	/* REVISIT: not yet ready for 343x */
-#if 0
-	if (omap2_select_table_rate(&virt_prcm_set, mpurate))
-		printk(KERN_ERR "Could not find matching MPU rate\n");
-#endif
-
 	recalculate_root_clocks();

 	printk(KERN_INFO "Switched to new clocking rate (Crystal/DPLL3/MPU): "
@@ -670,6 +688,9 @@ int __init omap2_clk_init(void)
 	struct clk **clkp;
 	/* u32 clkrate; */
 	u32 cpu_clkflg;
+	unsigned long mpu_speed, core_speed;
+	struct vdd_prcm_config *prcm_vdd;
+

 	/* REVISIT: Ultimately this will be used for multiboot */
 #if 0
@@ -712,22 +733,31 @@ int __init omap2_clk_init(void)
 		}
 	}

-	/* REVISIT: Not yet ready for OMAP3 */
-#if 0
-	/* Check the MPU rate set by bootloader */
-	clkrate = omap2_get_dpll_rate_24xx(&dpll_ck);
-	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
-		if (!(prcm->flags & cpu_mask))
-			continue;
-		if (prcm->xtal_speed != sys_ck.rate)
-			continue;
-		if (prcm->dpll_speed <= clkrate)
-			 break;
+	recalculate_root_clocks();
+
+	dpll1_clk = clk_get(NULL, "dpll1_ck");
+	dpll2_clk = clk_get(NULL, "dpll2_ck");
+	dpll3_clk = clk_get(NULL, "dpll3_ck");
+
+#ifdef CONFIG_MACH_OMAP_3430SDP
+	mpu_speed = dpll1_clk->rate;
+	prcm_vdd = vdd1_rate_table + MAX_VDD1_OPP;
+	for (; prcm_vdd->speed; prcm_vdd--) {
+		if (prcm_vdd->speed <= mpu_speed) {
+			curr_vdd1_prcm_set = prcm_vdd;
+			break;
+		}
 	}
-	curr_prcm_set = prcm;
-#endif

-	recalculate_root_clocks();
+	core_speed = dpll3_clk->rate;
+	prcm_vdd = vdd2_rate_table + MAX_VDD2_OPP;
+	for (; prcm_vdd->speed; prcm_vdd--) {
+		if (prcm_vdd->speed <= core_speed) {
+			curr_vdd2_prcm_set = prcm_vdd;
+			break;
+		}
+	}
+#endif

 	printk(KERN_INFO "Clocking rate (Crystal/DPLL/ARM core): "
 	       "%ld.%01ld/%ld/%ld MHz\n",
@@ -740,13 +770,131 @@ int __init omap2_clk_init(void)
 	 */
 	clk_enable_init_clocks();

-	/* Avoid sleeping during omap2_clk_prepare_for_reboot() */
-	/* REVISIT: not yet ready for 343x */
-#if 0
-	vclk = clk_get(NULL, "virt_prcm_set");
-	sclk = clk_get(NULL, "sys_ck");
-#endif
 	return 0;
 }

+inline unsigned int get_freq(struct vdd_prcm_config *opp_freq_table,
+							 unsigned long opp)
+{
+	struct vdd_prcm_config *prcm_config;
+	prcm_config = opp_freq_table;
+
+	for (; prcm_config->opp; prcm_config--)
+		if (prcm_config->opp == opp)
+			return prcm_config->speed;
+	return 0;
+}
+
+inline unsigned int get_opp(struct vdd_prcm_config *opp_freq_table,
+						 unsigned long freq)
+{
+	struct vdd_prcm_config *prcm_config;
+	prcm_config = opp_freq_table;
+
+	if (prcm_config->speed <= freq)
+		return prcm_config->opp; /* Return the Highest OPP */
+	for (; prcm_config->speed; prcm_config--) {
+		if (prcm_config->speed < freq)
+			return (prcm_config+1)->opp;
+		else if (prcm_config->speed == freq)
+			return prcm_config->opp;
+	}
+	/* Return the least OPP */
+	return (prcm_config+1)->opp;
+}
+
+#ifdef CONFIG_MACH_OMAP_3430SDP
+static void omap3_table_recalc(struct clk *clk)
+{
+	if ((clk != &virt_vdd1_prcm_set) && (clk != &virt_vdd2_prcm_set))
+		return;
+
+	if ((curr_vdd1_prcm_set) && (clk == &virt_vdd1_prcm_set))
+		clk->rate = curr_vdd1_prcm_set->speed;
+	else if ((curr_vdd2_prcm_set) && (clk == &virt_vdd2_prcm_set))
+		clk->rate = curr_vdd2_prcm_set->speed;
+	pr_debug("CLK RATE:%lu\n", clk->rate);
+}
+
+static long omap3_round_to_table_rate(struct clk *clk, unsigned long rate)
+{
+	struct vdd_prcm_config *ptr;
+	long highest_rate;
+
+	if ((clk != &virt_vdd1_prcm_set) && (clk != &virt_vdd2_prcm_set))
+		return -EINVAL;
+
+	highest_rate = -EINVAL;
+
+	if (clk == &virt_vdd1_prcm_set)
+		ptr = vdd1_rate_table + MAX_VDD1_OPP;
+	else
+		ptr = vdd2_rate_table + MAX_VDD2_OPP;
+
+	for (; ptr->speed; ptr--) {
+		highest_rate = ptr->speed;
+		pr_debug("Highest speed : %lu, rate: %lu\n", highest_rate,
+								rate);
+		if (ptr->speed <= rate)
+			break;
+	}
+	return highest_rate;
+}
+
+static int omap3_select_table_rate(struct clk *clk, unsigned long rate)
+{
+	struct vdd_prcm_config *prcm_vdd;
+	unsigned long found_speed = 0, curr_mpu_speed;
+	int index;
+
+	if ((clk != &virt_vdd1_prcm_set) && (clk != &virt_vdd2_prcm_set))
+		return -EINVAL;
+
+	if (clk == &virt_vdd1_prcm_set) {
+		prcm_vdd = vdd1_rate_table + MAX_VDD1_OPP;
+		index = MAX_VDD1_OPP;
+	} else if (clk == &virt_vdd2_prcm_set) {
+		prcm_vdd = vdd2_rate_table + MAX_VDD2_OPP;
+		index = MAX_VDD2_OPP;
+	}
+
+	for (; prcm_vdd->speed; prcm_vdd--, index--) {
+		if (prcm_vdd->speed <= rate) {
+			found_speed = prcm_vdd->speed;
+			pr_debug("Found speed = %lu\n", found_speed);
+			break;
+		}
+	}
+
+	if (!found_speed) {
+		printk(KERN_INFO "Could not set table rate to %luMHz\n",
+		       rate / 1000000);
+		return -EINVAL;
+	}
+
+
+	if (clk == &virt_vdd1_prcm_set) {
+		curr_mpu_speed = curr_vdd1_prcm_set->speed;
+		clk_set_rate(dpll1_clk, prcm_vdd->speed);
+		clk_set_rate(dpll2_clk, iva2_rate_table[index].speed);
+		curr_vdd1_prcm_set = prcm_vdd;
+#ifndef CONFIG_CPU_FREQ
+		/*Update loops_per_jiffy if processor speed is being changed*/
+		loops_per_jiffy = compute_lpj(loops_per_jiffy,
+					curr_mpu_speed/1000, found_speed/1000);
 #endif
+	} else {
+		clk_set_rate(dpll3_clk, prcm_vdd->speed);
+		curr_vdd2_prcm_set = prcm_vdd;
+	}
+	return 0;
+}
+#else /* CONFIG_MACH_OMAP_3430SDP */
+static void omap3_table_recalc(struct clk *clk) {}
+static long omap3_round_to_table_rate(struct clk *clk, unsigned long rate)
+{ return 0; }
+static int omap3_select_table_rate(struct clk *clk, unsigned long rate)
+{ return 0; }
+#endif /* CONFIG_MACH_OMAP_3430SDP */
+
+#endif /* CONFIG_ARCH_OMAP3 */
Index: linux-omap-2.6/include/asm-arm/arch-omap/clock.h
===================================================================
--- linux-omap-2.6.orig/include/asm-arm/arch-omap/clock.h	2008-08-07
14:34:23.000000000 +0530
+++ linux-omap-2.6/include/asm-arm/arch-omap/clock.h	2008-08-07
15:07:19.000000000 +0530
@@ -126,6 +126,14 @@ struct clk_functions {
 #endif
 };

+#ifdef CONFIG_ARCH_OMAP3
+struct vdd_prcm_config {
+	unsigned long speed;
+	unsigned long opp;
+	unsigned long flags;
+};
+#endif
+
 extern unsigned int mpurate;

 extern int clk_init(struct clk_functions *custom_clocks);
Index: linux-omap-2.6/arch/arm/mach-omap2/board-3430sdp.c
===================================================================
--- linux-omap-2.6.orig/arch/arm/mach-omap2/board-3430sdp.c	2008-08-06
14:55:12.000000000 +0530
+++ linux-omap-2.6/arch/arm/mach-omap2/board-3430sdp.c	2008-08-07
15:07:50.000000000 +0530
@@ -40,6 +40,7 @@
 #include <asm/arch/keypad.h>
 #include <asm/arch/dma.h>
 #include <asm/arch/gpmc.h>
+#include <asm/arch/clock.h>
 #include <linux/i2c/twl4030-rtc.h>

 #include <asm/io.h>
@@ -53,6 +54,43 @@
 #define ENABLE_VAUX3_DEDICATED	0x03
 #define ENABLE_VAUX3_DEV_GRP	0x20

+struct vdd_prcm_config vdd1_rate_table[] = {
+	{0, 0, 0},
+	/*OPP1*/
+	{S125M, VDD1_OPP1, 0},
+	/*OPP2*/
+	{S250M, VDD1_OPP2, 0},
+	/*OPP3*/
+	{S500M, VDD1_OPP3, 0},
+	/*OPP4*/
+	{S550M, VDD1_OPP4, 0},
+	/*OPP5*/
+	{S600M, VDD1_OPP5, 0},
+};
+
+struct vdd_prcm_config vdd2_rate_table[] = {
+	{0, 0, 0},
+	/*OPP1*/
+	{0, VDD2_OPP1, 0},
+	/*OPP2*/
+	{S83M, VDD2_OPP2, 0},
+	/*OPP3*/
+	{S166M, VDD2_OPP3, 0},
+};
+
+struct vdd_prcm_config iva2_rate_table[] = {
+	{0, 0, 0},
+	/*OPP1*/
+	{S90M, VDD1_OPP1, 0},
+	/*OPP2*/
+	{S180M, VDD1_OPP2, 0},
+	/*OPP3*/
+	{S360M, VDD1_OPP3, 0},
+	/*OPP4*/
+	{S400M, VDD1_OPP4, 0},
+	/*OPP5*/
+	{S430M, VDD1_OPP5, 0},
+};

 #define TWL4030_MSECURE_GPIO 22

Index: linux-omap-2.6/include/asm-arm/arch-omap/board-3430sdp.h
===================================================================
--- linux-omap-2.6.orig/include/asm-arm/arch-omap/board-3430sdp.h	2008-08-06
14:55:22.000000000 +0530
+++ linux-omap-2.6/include/asm-arm/arch-omap/board-3430sdp.h	2008-08-07
15:07:19.000000000 +0530
@@ -68,5 +68,40 @@ extern void twl4030_bci_battery_init(voi
 #define FLASH_SIZE_SDPV1	SZ_64M
 #define FLASH_SIZE_SDPV2	SZ_128M

+/* MPU speeds */
+#define S600M   600000000
+#define S550M   550000000
+#define S500M   500000000
+#define S250M   250000000
+#define S125M   125000000
+
+/* IVA speeds */
+#define S430M   430000000
+#define S400M   400000000
+#define S360M   360000000
+#define S180M   180000000
+#define S90M    90000000
+
+/* L3 speeds */
+#define S83M    83000000
+#define S166M   166000000
+
+/* VDD1 OPPS */
+#define VDD1_OPP1       0x1
+#define VDD1_OPP2       0x2
+#define VDD1_OPP3       0x3
+#define VDD1_OPP4       0x4
+#define VDD1_OPP5       0x5
+
+/* VDD2 OPPS */
+#define VDD2_OPP1       0x1
+#define VDD2_OPP2       0x2
+#define VDD2_OPP3       0x3
+
+#define MIN_VDD1_OPP    VDD1_OPP1
+#define MAX_VDD1_OPP    VDD1_OPP5
+#define MIN_VDD2_OPP    VDD2_OPP1
+#define MAX_VDD2_OPP    VDD2_OPP3
+
 #endif /* __ASM_ARCH_OMAP_3430SDP_H */



--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux