Mask/clear TWL module IMRs/ISRs by iterating through arrays rather than
using a block of cut-and-pasted commands. Removes 1056 bytes of bloat.
Signed-off-by: Paul Walmsley <paul@xxxxxxxxx>
---
drivers/i2c/chips/twl4030-core.c | 302 +++++++++++++++++++++++---------------
1 files changed, 180 insertions(+), 122 deletions(-)
diff --git a/drivers/i2c/chips/twl4030-core.c b/drivers/i2c/chips/twl4030-core.c
index 38c227a..3fd2b24 100644
--- a/drivers/i2c/chips/twl4030-core.c
+++ b/drivers/i2c/chips/twl4030-core.c
@@ -160,6 +160,136 @@
#define TWL4030_SIH_CTRL_COR_MASK (1 << 2)
+/**
+ * struct twl4030_mod_iregs - TWL module IMR/ISR regs to mask/clear at init
+ * @mod_no: TWL4030 module number (e.g., TWL4030_MODULE_GPIO)
+ * @sih_ctrl: address of module SIH_CTRL register
+ * @reg_cnt: number of IMR/ISR regs
+ * @imrs: pointer to array of TWL module interrupt mask register indices
+ * @isrs: pointer to array of TWL module interrupt status register indices
+ *
+ * Ties together TWL4030 modules and lists of IMR/ISR registers to mask/clear
+ * during twl_init_irq().
+ */
+struct twl4030_mod_iregs {
+ const u8 mod_no;
+ const u8 sih_ctrl;
+ const u8 reg_cnt;
+ const u8 *imrs;
+ const u8 *isrs;
+};
+
+/* TWL4030 INT module interrupt mask registers */
+static const u8 __initconst twl4030_int_imr_regs[] = {
+ TWL4030_INT_PWR_IMR1,
+ TWL4030_INT_PWR_IMR2,
+};
+
+/* TWL4030 INT module interrupt status registers */
+static const u8 __initconst twl4030_int_isr_regs[] = {
+ TWL4030_INT_PWR_ISR1,
+ TWL4030_INT_PWR_ISR2,
+};
+
+/* TWL4030 INTERRUPTS module interrupt mask registers */
+static const u8 __initconst twl4030_interrupts_imr_regs[] = {
+ TWL4030_INTERRUPTS_BCIIMR1A,
+ TWL4030_INTERRUPTS_BCIIMR1B,
+ TWL4030_INTERRUPTS_BCIIMR2A,
+ TWL4030_INTERRUPTS_BCIIMR2B,
+};
+
+/* TWL4030 INTERRUPTS module interrupt status registers */
+static const u8 __initconst twl4030_interrupts_isr_regs[] = {
+ TWL4030_INTERRUPTS_BCIISR1A,
+ TWL4030_INTERRUPTS_BCIISR1B,
+ TWL4030_INTERRUPTS_BCIISR2A,
+ TWL4030_INTERRUPTS_BCIISR2B,
+};
+
+/* TWL4030 MADC module interrupt mask registers */
+static const u8 __initconst twl4030_madc_imr_regs[] = {
+ TWL4030_MADC_IMR1,
+ TWL4030_MADC_IMR2,
+};
+
+/* TWL4030 MADC module interrupt status registers */
+static const u8 __initconst twl4030_madc_isr_regs[] = {
+ TWL4030_MADC_ISR1,
+ TWL4030_MADC_ISR2,
+};
+
+/* TWL4030 keypad module interrupt mask registers */
+static const u8 __initconst twl4030_keypad_imr_regs[] = {
+ TWL4030_KEYPAD_KEYP_IMR1,
+ TWL4030_KEYPAD_KEYP_IMR2,
+};
+
+/* TWL4030 keypad module interrupt status registers */
+static const u8 __initconst twl4030_keypad_isr_regs[] = {
+ TWL4030_KEYPAD_KEYP_ISR1,
+ TWL4030_KEYPAD_KEYP_ISR2,
+};
+
+/* TWL4030 GPIO module interrupt mask registers */
+static const u8 __initconst twl4030_gpio_imr_regs[] = {
+ REG_GPIO_IMR1A,
+ REG_GPIO_IMR1B,
+ REG_GPIO_IMR2A,
+ REG_GPIO_IMR2B,
+ REG_GPIO_IMR3A,
+ REG_GPIO_IMR3B,
+};
+
+/* TWL4030 GPIO module interrupt status registers */
+static const u8 __initconst twl4030_gpio_isr_regs[] = {
+ REG_GPIO_ISR1A,
+ REG_GPIO_ISR1B,
+ REG_GPIO_ISR2A,
+ REG_GPIO_ISR2B,
+ REG_GPIO_ISR3A,
+ REG_GPIO_ISR3B,
+};
+
+/* TWL4030 modules that have IMR/ISR registers that must be masked/cleared */
+static const struct twl4030_mod_iregs __initconst twl4030_mod_regs[] = {
+ {
+ .mod_no = TWL4030_MODULE_INT,
+ .sih_ctrl = TWL4030_INT_PWR_SIH_CTRL,
+ .reg_cnt = ARRAY_SIZE(twl4030_int_imr_regs),
+ .imrs = twl4030_int_imr_regs,
+ .isrs = twl4030_int_isr_regs,
+ },
+ {
+ .mod_no = TWL4030_MODULE_INTERRUPTS,
+ .sih_ctrl = TWL4030_INTERRUPTS_BCISIHCTRL,
+ .reg_cnt = ARRAY_SIZE(twl4030_interrupts_imr_regs),
+ .imrs = twl4030_interrupts_imr_regs,
+ .isrs = twl4030_interrupts_isr_regs,
+ },
+ {
+ .mod_no = TWL4030_MODULE_MADC,
+ .sih_ctrl = TWL4030_MADC_MADC_SIH_CTRL,
+ .reg_cnt = ARRAY_SIZE(twl4030_madc_imr_regs),
+ .imrs = twl4030_madc_imr_regs,
+ .isrs = twl4030_madc_isr_regs,
+ },
+ {
+ .mod_no = TWL4030_MODULE_KEYPAD,
+ .sih_ctrl = TWL4030_KEYPAD_KEYP_SIH_CTRL,
+ .reg_cnt = ARRAY_SIZE(twl4030_keypad_imr_regs),
+ .imrs = twl4030_keypad_imr_regs,
+ .isrs = twl4030_keypad_isr_regs,
+ },
+ {
+ .mod_no = TWL4030_MODULE_GPIO,
+ .sih_ctrl = REG_GPIO_SIH_CTRL,
+ .reg_cnt = ARRAY_SIZE(twl4030_gpio_imr_regs),
+ .imrs = twl4030_gpio_imr_regs,
+ .isrs = twl4030_gpio_isr_regs,
+ },
+};
+
/* Helper functions */
static int
@@ -779,136 +909,64 @@ static int twl4030_read_cor_bit(u8 mod_no, u8 reg)
return tmp;
}
+/**
+ * twl4030_mask_clear_intrs - mask and clear all TWL4030 interrupts
+ * @t: pointer to twl4030_mod_iregs array
+ * @t_sz: ARRAY_SIZE(t) (starting at 1)
+ *
+ * Mask all TWL4030 interrupt mask registers (IMRs) and clear all
+ * interrupt status registers (ISRs). No return value, but will WARN if
+ * any I2C operations fail.
+ */
+static void __init twl4030_mask_clear_intrs(const struct twl4030_mod_iregs *t,
+ const u8 t_sz)
+{
+ int i, j;
+
+ /*
+ * N.B. - further efficiency is possible here. Eight I2C
+ * operations on BCI and GPIO modules are avoidable if I2C
+ * burst read/write transactions were implemented. Would
+ * probably save about 1ms of boot time and a small amount of
+ * power.
+ */
+ for (i = 0; i < t_sz; i++) {
+ const struct twl4030_mod_iregs tmr = t[i];
+ int cor;
+
+ /* Are ISRs cleared by reads or writes? */
+ cor = twl4030_read_cor_bit(tmr.mod_no, tmr.sih_ctrl);
+ WARN_ON(cor < 0);
+
+ for (j = 0; j < tmr.reg_cnt; j++) {
+
+ /* Mask interrupts at the TWL4030 */
+ WARN_ON(twl4030_i2c_write_u8(tmr.mod_no, 0xff,
+ tmr.imrs[j]) < 0);
+
+ /* Clear TWL4030 ISRs */
+ WARN_ON(twl4030_i2c_clear_isr(tmr.mod_no,
+ tmr.isrs[j], cor) < 0);
+ }
+ }
+
+ return;
+}
+
+
static void twl_init_irq(void)
{
- int i = 0;
+ int i;
int res = 0;
- int cor;
char *msg = "Unable to register interrupt subsystem";
unsigned int irq_num;
/*
- * For each TWL4030 module with ISR/IMR registers, mask all
- * interrupts and then clear any existing interrupt status bits,
- * since we initially do not have any TWL4030 module interrupt
- * handlers present.
+ * Mask and clear all TWL4030 interrupts since initially we do
+ * not have any TWL4030 module interrupt handlers present
*/
-
- /* Mask INT (PWR) interrupts at TWL4030 */
- WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_INT, 0xff,
- TWL4030_INT_PWR_IMR1) < 0);
- WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_INT, 0xff,
- TWL4030_INT_PWR_IMR2) < 0);
-
- /* Are PWR interrupt status bits cleared by reads or writes? */
- cor = twl4030_read_cor_bit(TWL4030_MODULE_INT,
- TWL4030_INT_PWR_SIH_CTRL);
- WARN_ON(cor < 0);
-
- /* Clear TWL4030 INT (PWR) ISRs */
- WARN_ON(twl4030_i2c_clear_isr(TWL4030_MODULE_INT,
- TWL4030_INT_PWR_ISR1, cor) < 0);
- WARN_ON(twl4030_i2c_clear_isr(TWL4030_MODULE_INT,
- TWL4030_INT_PWR_ISR2, cor) < 0);
-
- /* Slave address 0x4A */
-
- /* Mask BCI interrupts at TWL4030 */
- WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, 0xff,
- TWL4030_INTERRUPTS_BCIIMR1A) < 0);
- WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, 0xff,
- TWL4030_INTERRUPTS_BCIIMR2A) < 0);
- WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, 0xff,
- TWL4030_INTERRUPTS_BCIIMR1B) < 0);
- WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, 0xff,
- TWL4030_INTERRUPTS_BCIIMR2B) < 0);
-
- /* Are BCI interrupt status bits cleared by reads or writes? */
- cor = twl4030_read_cor_bit(TWL4030_MODULE_INTERRUPTS,
- TWL4030_INTERRUPTS_BCISIHCTRL);
- WARN_ON(cor < 0);
-
- /* Clear TWL4030 BCI ISRs */
- WARN_ON(twl4030_i2c_clear_isr(TWL4030_MODULE_INTERRUPTS,
- TWL4030_INTERRUPTS_BCIISR1A, cor) < 0);
- WARN_ON(twl4030_i2c_clear_isr(TWL4030_MODULE_INTERRUPTS,
- TWL4030_INTERRUPTS_BCIISR2A, cor) < 0);
- WARN_ON(twl4030_i2c_clear_isr(TWL4030_MODULE_INTERRUPTS,
- TWL4030_INTERRUPTS_BCIISR1B, cor) < 0);
- WARN_ON(twl4030_i2c_clear_isr(TWL4030_MODULE_INTERRUPTS,
- TWL4030_INTERRUPTS_BCIISR2B, cor) < 0);
-
- /* MAD C */
- /* Mask MADC interrupts at TWL4030 */
- WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_MADC, 0xff,
- TWL4030_MADC_IMR1) < 0);
- WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_MADC, 0xff,
- TWL4030_MADC_IMR2) < 0);
-
- /* Are MADC interrupt status bits cleared by reads or writes? */
- cor = twl4030_read_cor_bit(TWL4030_MODULE_MADC,
- TWL4030_MADC_MADC_SIH_CTRL);
- WARN_ON(cor < 0);
-
- /* Clear TWL4030 MADC ISRs */
- WARN_ON(twl4030_i2c_clear_isr(TWL4030_MODULE_MADC,
- TWL4030_MADC_ISR1, cor) < 0);
- WARN_ON(twl4030_i2c_clear_isr(TWL4030_MODULE_MADC,
- TWL4030_MADC_ISR2, cor) < 0);
-
- /* key Pad */
- /* Mask keypad interrupts at TWL4030 */
- WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_KEYPAD, 0xff,
- TWL4030_KEYPAD_KEYP_IMR1) < 0);
- WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_KEYPAD, 0xff,
- TWL4030_KEYPAD_KEYP_IMR2) < 0);
-
- /* Are keypad interrupt status bits cleared by reads or writes? */
- cor = twl4030_read_cor_bit(TWL4030_MODULE_KEYPAD,
- TWL4030_KEYPAD_KEYP_SIH_CTRL);
- WARN_ON(cor < 0);
-
- /* Clear TWL4030 keypad ISRs */
- /* XXX does this still need to be done twice for some reason? */
- WARN_ON(twl4030_i2c_clear_isr(TWL4030_MODULE_KEYPAD,
- TWL4030_KEYPAD_KEYP_ISR1, cor) < 0);
- WARN_ON(twl4030_i2c_clear_isr(TWL4030_MODULE_KEYPAD,
- TWL4030_KEYPAD_KEYP_ISR2, cor) < 0);
-
- /* Slave address 0x49 */
-
- /* Mask GPIO interrupts at TWL4030 */
- WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0xff,
- REG_GPIO_IMR1A) < 0);
- WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0xff,
- REG_GPIO_IMR2A) < 0);
- WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0xff,
- REG_GPIO_IMR3A) < 0);
- WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0xff,
- REG_GPIO_IMR1B) < 0);
- WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0xff,
- REG_GPIO_IMR2B) < 0);
- WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0xff,
- REG_GPIO_IMR3B) < 0);
-
- /* Are GPIO interrupt status bits cleared by reads or writes? */
- cor = twl4030_read_cor_bit(TWL4030_MODULE_GPIO,
- REG_GPIO_SIH_CTRL);
- WARN_ON(cor < 0);
-
- /* Clear TWL4030 GPIO ISRs */
- WARN_ON(twl4030_i2c_clear_isr(TWL4030_MODULE_GPIO, REG_GPIO_ISR1A,
- cor) < 0);
- WARN_ON(twl4030_i2c_clear_isr(TWL4030_MODULE_GPIO, REG_GPIO_ISR2A,
- cor) < 0);
- WARN_ON(twl4030_i2c_clear_isr(TWL4030_MODULE_GPIO, REG_GPIO_ISR3A,
- cor) < 0);
- WARN_ON(twl4030_i2c_clear_isr(TWL4030_MODULE_GPIO, REG_GPIO_ISR1B,
- cor) < 0);
- WARN_ON(twl4030_i2c_clear_isr(TWL4030_MODULE_GPIO, REG_GPIO_ISR2B,
- cor) < 0);
- WARN_ON(twl4030_i2c_clear_isr(TWL4030_MODULE_GPIO, REG_GPIO_ISR3B,
- cor) < 0);
+ twl4030_mask_clear_intrs(twl4030_mod_regs,
+ ARRAY_SIZE(twl4030_mod_regs));
/* install an irq handler for each of the PIH modules */
for (i = TWL4030_IRQ_BASE; i < TWL4030_IRQ_END; i++) {
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
