twl_init_irq() uses "magic numbers" to access TWL module IMR and ISR
registers. Symbolic constants are definitely preferred.
Rather than duplicating already existing symbolic constants in
twl4030-gpio.c and twl4030-pwrirq.c, move the existing constants out
into include files. This patch should not change kernel behavior.
Signed-off-by: Paul Walmsley <paul@xxxxxxxxx>
---
drivers/i2c/chips/twl4030-gpio.c | 48 -----------------------
drivers/i2c/chips/twl4030-pwrirq.c | 15 +++----
include/linux/i2c/twl4030-gpio.h | 76 ++++++++++++++++++++++++++++++++++++
include/linux/i2c/twl4030-pwrirq.h | 37 ++++++++++++++++++
4 files changed, 121 insertions(+), 55 deletions(-)
create mode 100644 include/linux/i2c/twl4030-gpio.h
create mode 100644 include/linux/i2c/twl4030-pwrirq.h
diff --git a/drivers/i2c/chips/twl4030-gpio.c b/drivers/i2c/chips/twl4030-gpio.c
index f16a48b..9d17f45 100644
--- a/drivers/i2c/chips/twl4030-gpio.c
+++ b/drivers/i2c/chips/twl4030-gpio.c
@@ -38,6 +38,7 @@
#include <linux/i2c.h>
#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl4030-gpio.h>
#include <linux/slab.h>
#include <asm/arch/irqs.h>
@@ -47,53 +48,6 @@
#include <linux/device.h>
-/*
- * GPIO Block Register definitions
- */
-
-#define REG_GPIODATAIN1 0x0
-#define REG_GPIODATAIN2 0x1
-#define REG_GPIODATAIN3 0x2
-#define REG_GPIODATADIR1 0x3
-#define REG_GPIODATADIR2 0x4
-#define REG_GPIODATADIR3 0x5
-#define REG_GPIODATAOUT1 0x6
-#define REG_GPIODATAOUT2 0x7
-#define REG_GPIODATAOUT3 0x8
-#define REG_CLEARGPIODATAOUT1 0x9
-#define REG_CLEARGPIODATAOUT2 0xA
-#define REG_CLEARGPIODATAOUT3 0xB
-#define REG_SETGPIODATAOUT1 0xC
-#define REG_SETGPIODATAOUT2 0xD
-#define REG_SETGPIODATAOUT3 0xE
-#define REG_GPIO_DEBEN1 0xF
-#define REG_GPIO_DEBEN2 0x10
-#define REG_GPIO_DEBEN3 0x11
-#define REG_GPIO_CTRL 0x12
-#define REG_GPIOPUPDCTR1 0x13
-#define REG_GPIOPUPDCTR2 0x14
-#define REG_GPIOPUPDCTR3 0x15
-#define REG_GPIOPUPDCTR4 0x16
-#define REG_GPIOPUPDCTR5 0x17
-#define REG_GPIO_ISR1A 0x19
-#define REG_GPIO_ISR2A 0x1A
-#define REG_GPIO_ISR3A 0x1B
-#define REG_GPIO_IMR1A 0x1C
-#define REG_GPIO_IMR2A 0x1D
-#define REG_GPIO_IMR3A 0x1E
-#define REG_GPIO_ISR1B 0x1F
-#define REG_GPIO_ISR2B 0x20
-#define REG_GPIO_ISR3B 0x21
-#define REG_GPIO_IMR1B 0x22
-#define REG_GPIO_IMR2B 0x23
-#define REG_GPIO_IMR3B 0x24
-#define REG_GPIO_EDR1 0x28
-#define REG_GPIO_EDR2 0x29
-#define REG_GPIO_EDR3 0x2A
-#define REG_GPIO_EDR4 0x2B
-#define REG_GPIO_EDR5 0x2C
-#define REG_GPIO_SIH_CTRL 0x2D
-
/* BitField Definitions */
/* Data banks : 3 banks for 8 gpios each */
diff --git a/drivers/i2c/chips/twl4030-pwrirq.c b/drivers/i2c/chips/twl4030-pwrirq.c
index a4d2e92..1afdb65 100644
--- a/drivers/i2c/chips/twl4030-pwrirq.c
+++ b/drivers/i2c/chips/twl4030-pwrirq.c
@@ -27,10 +27,8 @@
#include <linux/random.h>
#include <linux/kthread.h>
#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl4030-pwrirq.h>
-#define PWR_ISR1 0
-#define PWR_IMR1 1
-#define PWR_SIH_CTRL 7
#define PWR_SIH_CTRL_COR (1<<2)
static u8 twl4030_pwrirq_mask;
@@ -93,7 +91,8 @@ static void do_twl4030_pwrmodule_irq(unsigned int irq, irq_desc_t *desc)
twl4030_pwrirq_mask |= 1 << (irq - TWL4030_PWR_IRQ_BASE);
local_irq_enable();
twl4030_i2c_write_u8(TWL4030_MODULE_INT,
- twl4030_pwrirq_mask, PWR_IMR1);
+ twl4030_pwrirq_mask,
+ TWL4030_INT_PWR_IMR1);
}
}
}
@@ -115,7 +114,7 @@ static void do_twl4030_pwrirq(unsigned int irq, irq_desc_t *desc)
local_irq_enable();
ret = twl4030_i2c_read_u8(TWL4030_MODULE_INT, &pwr_isr,
- PWR_ISR1);
+ TWL4030_INT_PWR_ISR1);
if (ret) {
printk(KERN_WARNING
"I2C error %d while reading TWL4030"
@@ -151,7 +150,7 @@ static int twl4030_pwrirq_thread(void *data)
twl4030_pwrirq_mask &= ~local_unmask;
twl4030_i2c_write_u8(TWL4030_MODULE_INT, twl4030_pwrirq_mask,
- PWR_IMR1);
+ TWL4030_INT_PWR_IMR1);
local_irq_disable();
if (!twl4030_pwrirq_pending_unmask)
@@ -172,14 +171,14 @@ static int __init twl4030_pwrirq_init(void)
twl4030_pwrirq_pending_unmask = 0;
err = twl4030_i2c_write_u8(TWL4030_MODULE_INT, twl4030_pwrirq_mask,
- PWR_IMR1);
+ TWL4030_INT_PWR_IMR1);
if (err)
return err;
/* Enable clear on read */
err = twl4030_i2c_write_u8(TWL4030_MODULE_INT, PWR_SIH_CTRL_COR,
- PWR_SIH_CTRL);
+ TWL4030_INT_PWR_SIH_CTRL);
if (err)
return err;
diff --git a/include/linux/i2c/twl4030-gpio.h b/include/linux/i2c/twl4030-gpio.h
new file mode 100644
index 0000000..7cbf610
--- /dev/null
+++ b/include/linux/i2c/twl4030-gpio.h
@@ -0,0 +1,76 @@
+/*
+ * twl4030-gpio.h - header for TWL4030 GPIO module
+ *
+ * Copyright (C) 2005-2006, 2008 Texas Instruments, Inc.
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Based on tlv320aic23.c:
+ * Copyright (c) by Kai Svahn <kai.svahn@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __TWL4030_GPIO_H_
+#define __TWL4030_GPIO_H_
+
+/*
+ * GPIO Block Register definitions
+ */
+
+#define REG_GPIODATAIN1 0x0
+#define REG_GPIODATAIN2 0x1
+#define REG_GPIODATAIN3 0x2
+#define REG_GPIODATADIR1 0x3
+#define REG_GPIODATADIR2 0x4
+#define REG_GPIODATADIR3 0x5
+#define REG_GPIODATAOUT1 0x6
+#define REG_GPIODATAOUT2 0x7
+#define REG_GPIODATAOUT3 0x8
+#define REG_CLEARGPIODATAOUT1 0x9
+#define REG_CLEARGPIODATAOUT2 0xA
+#define REG_CLEARGPIODATAOUT3 0xB
+#define REG_SETGPIODATAOUT1 0xC
+#define REG_SETGPIODATAOUT2 0xD
+#define REG_SETGPIODATAOUT3 0xE
+#define REG_GPIO_DEBEN1 0xF
+#define REG_GPIO_DEBEN2 0x10
+#define REG_GPIO_DEBEN3 0x11
+#define REG_GPIO_CTRL 0x12
+#define REG_GPIOPUPDCTR1 0x13
+#define REG_GPIOPUPDCTR2 0x14
+#define REG_GPIOPUPDCTR3 0x15
+#define REG_GPIOPUPDCTR4 0x16
+#define REG_GPIOPUPDCTR5 0x17
+#define REG_GPIO_ISR1A 0x19
+#define REG_GPIO_ISR2A 0x1A
+#define REG_GPIO_ISR3A 0x1B
+#define REG_GPIO_IMR1A 0x1C
+#define REG_GPIO_IMR2A 0x1D
+#define REG_GPIO_IMR3A 0x1E
+#define REG_GPIO_ISR1B 0x1F
+#define REG_GPIO_ISR2B 0x20
+#define REG_GPIO_ISR3B 0x21
+#define REG_GPIO_IMR1B 0x22
+#define REG_GPIO_IMR2B 0x23
+#define REG_GPIO_IMR3B 0x24
+#define REG_GPIO_EDR1 0x28
+#define REG_GPIO_EDR2 0x29
+#define REG_GPIO_EDR3 0x2A
+#define REG_GPIO_EDR4 0x2B
+#define REG_GPIO_EDR5 0x2C
+#define REG_GPIO_SIH_CTRL 0x2D
+
+#endif /* End of __TWL4030_GPIO_H */
diff --git a/include/linux/i2c/twl4030-pwrirq.h b/include/linux/i2c/twl4030-pwrirq.h
new file mode 100644
index 0000000..7a13368
--- /dev/null
+++ b/include/linux/i2c/twl4030-pwrirq.h
@@ -0,0 +1,37 @@
+/*
+ * twl4030-gpio.h - header for TWL4030 GPIO module
+ *
+ * Copyright (C) 2008 Texas Instruments, Inc.
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __TWL4030_PWRIRQ_H_
+#define __TWL4030_PWRIRQ_H_
+
+/*
+ * INT Module Register definitions
+ * (not all registers are defined below)
+ */
+
+#define TWL4030_INT_PWR_ISR1 0x0
+#define TWL4030_INT_PWR_IMR1 0x1
+#define TWL4030_INT_PWR_ISR2 0x2
+#define TWL4030_INT_PWR_IMR2 0x3
+#define TWL4030_INT_PWR_SIH_CTRL 0x7
+
+#endif /* End of __TWL4030_PWRIRQ_H */
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
