Currently sr_configure_vc() is the only dedicated API to configure Voltage controller parameter. But still SYSOFF specific configuration shall be moved to prcm init. Regards, Deva -----Original Message----- From: linux-omap-owner@xxxxxxxxxxxxxxx [mailto:linux-omap-owner@xxxxxxxxxxxxxxx] On Behalf Of TK, Pratheesh Gangadhar Sent: Tuesday, July 22, 2008 5:36 PM To: Peter 'p2' De Schrijver; linux-omap@xxxxxxxxxxxxxxx Subject: RE: OMAP3 SYS_OFF_MODE support I am just wondering why these changes are present in smartreflex.c. These should be initialized during prcm init or PMIC init (if there are parameters dependent on PMIC) ideally. I can't think of any dependency between smartreflex and SYS_OFF_MODE feature. -----Original Message----- From: linux-omap-owner@xxxxxxxxxxxxxxx [mailto:linux-omap-owner@xxxxxxxxxxxxxxx] On Behalf Of Peter 'p2' De Schrijver Sent: Monday, July 21, 2008 9:47 PM To: linux-omap@xxxxxxxxxxxxxxx Subject: RFC: OMAP3 SYS_OFF_MODE support The following patch set introduces support for the OMAP3 SYS_OFF_MODE signal. This will cause a properly programmed triton2 to shutdown the VDD1 and VDD2 regulators when both core and MPU powerdomain are in off state. The patches includes programming triton2 with the appropriate scripts for the SDP3430 board. By default the OMAP3 polarity of the SYS_OFF_MODE signal is inverted compared to what triton2 expects. This means the polarity needs to be changed before the triton2 scripts are activated, otherwise the system will crash. At the moment this is done in omap2_clk_init as this function is called before triton2 is initialized. Better suggestions are welcome. Thanks to Kalle Jokiniemi for doing the initial patch and test work. -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
