Hello everyone, noticed a few issues booting the N800 with the current git head d3b3ae0fe6c71641da19c8de466ec366d39847e3 today. Haven't booted the N800 for a while, so not sure when these showed up. Looks like there is some LM8323 problem - suppose it could be an I2C problem: [ 4.384094] lm8323 2-0045: sent 2 bytes of -121 total [ 4.389312] lm8323 2-0045: sending read cmd 0x82 failed [ 4.394775] lm8323 2-0045: sent 2 bytes of -121 total [ 4.400024] lm8323 2-0045: sent 2 bytes of -121 total [ 4.405212] lm8323 2-0045: sent 2 bytes of -121 total [ 4.410614] lm8323 2-0045: sent 2 bytes of -121 total [ 4.415985] lm8323 2-0045: sent 2 bytes of -121 total [ 4.421325] lm8323 2-0045: sent 3 bytes of -121 total [ 4.426696] lm8323 2-0045: sent 3 bytes of -121 total [ 4.432067] lm8323 2-0045: sending read cmd 0x80 failed [ 4.437316] lm8323 2-0045: device not found Also MMC looks like something may be wrong: [ 4.524597] mmci-omap mmci-omap.1: command timeout (CMD8) [ 4.530059] mmci-omap mmci-omap.1: command timeout (CMD8) [ 4.536224] mmci-omap mmci-omap.1: command timeout (CMD5) [ 4.542327] mmci-omap mmci-omap.1: command timeout (CMD5) [ 4.547790] mmci-omap mmci-omap.1: command timeout (CMD5) [ 4.553894] mmci-omap mmci-omap.1: command timeout (CMD5) [ 4.559326] mmci-omap mmci-omap.1: command timeout (CMD5) [ 4.565429] mmci-omap mmci-omap.1: command timeout (CMD5) [ 4.570892] mmci-omap mmci-omap.1: command timeout (CMD5) [ 4.581481] mmci-omap mmci-omap.1: command timeout (CMD8) [ 4.586914] mmci-omap mmci-omap.1: command timeout (CMD8) ... and then later ... [ 4.866729] mmc0: host does not support reading read-only switch. assuming write-enable. [ 4.874969] mmc0: new SD card at address e624 [ 4.881042] mmcblk0: mmc0:e624 SD128 123008KiB [ 4.886077] mmcblk0: p1 [ 4.915222] mmci-omap mmci-omap.1: command timeout (CMD8) [ 4.920684] mmci-omap mmci-omap.1: command timeout (CMD8) [ 4.926818] mmci-omap mmci-omap.1: command timeout (CMD5) [ 4.932312] mmci-omap mmci-omap.1: command timeout (CMD5) [ 4.938415] mmci-omap mmci-omap.1: command timeout (CMD5) [ 4.944519] mmci-omap mmci-omap.1: command timeout (CMD5) [ 4.949981] mmci-omap mmci-omap.1: command timeout (CMD5) [ 4.956085] mmci-omap mmci-omap.1: command timeout (CMD5) [ 4.961547] mmci-omap mmci-omap.1: command timeout (CMD5) [ 4.967681] mmci-omap mmci-omap.1: command timeout (CMD55) [ 4.973236] mmci-omap mmci-omap.1: command timeout (CMD55) [ 4.979095] omap24xxcam omap24xxcam: sensor is tcm825x [ 4.984283] mmci-omap mmci-omap.1: command timeout (CMD55) [ 4.990539] mmci-omap mmci-omap.1: command timeout (CMD55) [ 4.996765] mmci-omap mmci-omap.1: command timeout (CMD55) [ 5.002319] mmci-omap mmci-omap.1: command timeout (CMD55) [ 5.008575] mmci-omap mmci-omap.1: command timeout (CMD1) Something is also wrong with audio - no touchscreen clicks play. - Paul -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
