Fix sparse warnings in mach-omap2/irq.c. Fix by defining intc_bank_write_reg() and intc_bank_read_reg(), and convert INTC module register access to use them rather than __raw_{read,write}l. Also clear up some checkpatch warnings involving includes from asm/ rather than linux/. Signed-off-by: Paul Walmsley <paul@xxxxxxxxx> --- arch/arm/mach-omap2/irq.c | 58 ++++++++++++++++++++++++++++----------------- 1 files changed, 36 insertions(+), 22 deletions(-) diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index 8237529..ac062ee 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -15,8 +15,10 @@ #include <linux/interrupt.h> #include <asm/hardware.h> #include <asm/mach/irq.h> -#include <asm/irq.h> -#include <asm/io.h> +#include <linux/irq.h> +#include <linux/io.h> + +/* selected INTC register offsets */ #define INTC_REVISION 0x0000 #define INTC_SYSCONFIG 0x0010 @@ -42,36 +44,49 @@ static struct omap_irq_bank { }, }; +/* INTC bank register get/set */ + +static void intc_bank_write_reg(u32 val, struct omap_irq_bank *bank, u16 reg) +{ + pr_debug("intc_write_reg: writing 0x%0x to 0x%0x\n", val, + (__force u32)(bank->base_reg + reg)); + + omap_writel(val, bank->base_reg + reg); +} + +static u32 intc_bank_read_reg(struct omap_irq_bank *bank, u16 reg) +{ + return omap_readl(bank->base_reg + reg); +} + /* XXX: FIQ and additional INTC support (only MPU at the moment) */ static void omap_ack_irq(unsigned int irq) { - __raw_writel(0x1, irq_banks[0].base_reg + INTC_CONTROL); + intc_bank_write_reg(0x1, &irq_banks[0], INTC_CONTROL); } static void omap_mask_irq(unsigned int irq) { int offset = (irq >> 5) << 5; - if (irq >= 64) { + if (irq >= 64) irq %= 64; - } else if (irq >= 32) { + else if (irq >= 32) irq %= 32; - } - __raw_writel(1 << irq, irq_banks[0].base_reg + INTC_MIR_SET0 + offset); + intc_bank_write_reg(1 << irq, &irq_banks[0], INTC_MIR_SET0 + offset); } static void omap_unmask_irq(unsigned int irq) { int offset = (irq >> 5) << 5; - if (irq >= 64) { + if (irq >= 64) irq %= 64; - } else if (irq >= 32) { + else if (irq >= 32) irq %= 32; - } - __raw_writel(1 << irq, irq_banks[0].base_reg + INTC_MIR_CLEAR0 + offset); + intc_bank_write_reg(1 << irq, &irq_banks[0], INTC_MIR_CLEAR0 + offset); } static void omap_mask_ack_irq(unsigned int irq) @@ -91,20 +106,20 @@ static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank) { unsigned long tmp; - tmp = __raw_readl(bank->base_reg + INTC_REVISION) & 0xff; + tmp = intc_bank_read_reg(bank, INTC_REVISION) & 0xff; printk(KERN_INFO "IRQ: Found an INTC at 0x%08lx " "(revision %ld.%ld) with %d interrupts\n", bank->base_reg, tmp >> 4, tmp & 0xf, bank->nr_irqs); - tmp = __raw_readl(bank->base_reg + INTC_SYSCONFIG); + tmp = intc_bank_read_reg(bank, INTC_SYSCONFIG); tmp |= 1 << 1; /* soft reset */ - __raw_writel(tmp, bank->base_reg + INTC_SYSCONFIG); + intc_bank_write_reg(tmp, bank, INTC_SYSCONFIG); - while (!(__raw_readl(bank->base_reg + INTC_SYSSTATUS) & 0x1)) + while (!(intc_bank_read_reg(bank, INTC_SYSSTATUS) & 0x1)) /* Wait for reset to complete */; /* Enable autoidle */ - __raw_writel(1 << 0, bank->base_reg + INTC_SYSCONFIG); + intc_bank_write_reg(1 << 0, bank, INTC_SYSCONFIG); } void __init omap_init_irq(void) @@ -116,12 +131,11 @@ void __init omap_init_irq(void) for (i = 0; i < ARRAY_SIZE(irq_banks); i++) { struct omap_irq_bank *bank = irq_banks + i; - if (cpu_is_omap24xx()) { - bank->base_reg = IO_ADDRESS(OMAP24XX_IC_BASE); - } - if (cpu_is_omap34xx()) { - bank->base_reg = IO_ADDRESS(OMAP34XX_IC_BASE); - } + if (cpu_is_omap24xx()) + bank->base_reg = OMAP24XX_IC_BASE; + else if (cpu_is_omap34xx()) + bank->base_reg = OMAP34XX_IC_BASE; + omap_irq_bank_init_one(bank); nr_irqs += bank->nr_irqs; -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html