Hi Felipe,
Thanks for the comments. I will fix them and resend the patch.
Please note my view on the below point.
> > - pdev = platform_device_alloc("omap-bq2700-battery", id);
> > + pdev = platform_device_alloc("bq27000-bat", id);
>
> do you really need to change the name here?
> It seems that this change doesn't belong to this patch.
I will make this as a separate patch.As BQ27000 chip is not omap specific,
I guess the above name is not correct. Hence I intend to make that change.
Regards,
Madhu
> -----Original Message-----
> From: Felipe Balbi [mailto:me@xxxxxxxxxxxxxxx]
> Sent: Friday, April 25, 2008 4:20 PM
> To: Madhusudhan Chikkature Rajashekar
> Cc: Tony Lindgren; linux-omap@xxxxxxxxxxxxxxx
> Subject: Re: [RFC/PATCH] BQ27000/BQ27200 battery monitoring
> driver for OMAP34xx
>
> Some cosmetic comments below
>
>
>
> On Fri, 25 Apr 2008 15:01:34 +0530, "Madhusudhan Chikkature
> Rajashekar"
> <madhu.cr@xxxxxx> wrote:
> > This patch provides the battery monitoring driver to
> monitor batteries
> with
> > BQ27000(HDQ) or BQ27200(i2C) chips.
> > On omap 3430 sdp BQ27000 battery is tested through the HDQ interface
> which
> > uses the earlier posted HDQ and BQ slave drivers.
> > The BQ27200 support is an extension to the BQ27000 driver
> as the register
> > set between BQ27000 and BQ27200 is the same.
> >
> > Thanks to Klaus.K Pedersen and Mikko Ylinen for the
> suggestions to add
> > support for BQ27200 chip as part of
> > this driver.
> >
> >
> > Signed-off-by: Madhusudhan Chikkature<madhu.cr@xxxxxx>
> >
> > ---
> > drivers/power/Kconfig | 21 +
> > drivers/power/Makefile | 1
> > drivers/power/bq27x00_battery.c | 556
> > ++++++++++++++++++++++++++++++++++++++++
> > drivers/w1/slaves/w1_bq27000.c | 2
> > 4 files changed, 579 insertions(+), 1 deletion(-)
> >
> > Index: linux-omap-2.6/drivers/power/bq27x00_battery.c
> > ===================================================================
> > --- /dev/null 1970-01-01 00:00:00.000000000 +0000
> > +++ linux-omap-2.6/drivers/power/bq27x00_battery.c 2008-04-24
> > 10:50:53.631358952 +0530
> > @@ -0,0 +1,556 @@
> > +/*
> > + * linux/drivers/power/bq27x00_battery.c
> > + *
> > + * BQ27000/BQ27200 battery driver
> > + *
> > + * Copyright (C) 2008 Texas Instruments, Inc.
> > + *
> > + * Author: Texas Instruments
> > + *
> > + * This package is free software; you can redistribute it
> and/or modify
> > + * it under the terms of the GNU General Public License
> version 2 as
> > + * published by the Free Software Foundation.
> > + *
> > + * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
> > + * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
> > + * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A
> PARTICULAR PURPOSE.
> > + *
> > + */
> > +#include <linux/module.h>
> > +#include <linux/param.h>
> > +#include <linux/jiffies.h>
> > +#include <linux/workqueue.h>
> > +#include <linux/delay.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/power_supply.h>
> > +
> > +#if defined(CONFIG_BATTERY_BQ27000)
>
> Here use ifdef
>
> > +#define BATTERY_BQ27000
>
> there's no need to add this one as you can use the Kconfig option
>
> > +#include "../w1/w1.h"
> > +#endif
> > +#if defined(CONFIG_BATTERY_BQ27200)
> > +#define BATTERY_BQ27200
> > +#include <linux/i2c.h>
> > +#endif
> > +
> > +#define BQ27x00_REG_TEMP 0x06
> > +#define BQ27x00_REG_VOLT 0x08
> > +#define BQ27x00_REG_RSOC 0x0B /* Relative
> State-of-Charge */
> > +#define BQ27x00_REG_AI 0x14
> > +#define BQ27x00_REG_FLAGS 0x0A
> > +#define HIGH_BYTE(A) ((A) << 8)
> > +
> > +#if defined(BATTERY_BQ27000)
> > +extern int w1_bq27000_read(struct device *dev, u8 reg);
> > +#endif
> > +
> > +struct bq27x00_device_info;
> > +struct bq27x00_access_methods {
> > + int (*read)(u8 reg, int *rt_value, int b_single,
> > + struct bq27x00_device_info *di);
> > +};
> > +
> > +struct bq27x00_device_info {
> > + struct device *dev;
> > +#if defined(BATTERY_BQ27000)
>
> #ifdef CONFIG_BATERRY_BQ27000
>
> > + struct device *w1_dev;
> > +#endif
> > +#if defined(BATTERY_BQ27200)
>
> #ifdef CONFIG_BATTERY_BQ27200
>
> > + struct i2c_client *client;
> > +#endif
> > + unsigned long update_time;
> > + int voltage_uV;
> > + int current_uA;
> > + int temp_C;
> > + int charge_rsoc;
> > + struct bq27x00_access_methods *bus;
> > + struct power_supply bat;
> > + struct delayed_work monitor_work;
> > +};
> > +
> > +static unsigned int cache_time = 60000;
> > +module_param(cache_time, uint, 0644);
> > +MODULE_PARM_DESC(cache_time, "cache time in milliseconds");
> > +
> > +static enum power_supply_property bq27x00_battery_props[] = {
> > + POWER_SUPPLY_PROP_PRESENT,
> > + POWER_SUPPLY_PROP_VOLTAGE_NOW,
> > + POWER_SUPPLY_PROP_CURRENT_NOW,
> > + POWER_SUPPLY_PROP_CHARGE_NOW,
> > + POWER_SUPPLY_PROP_CAPACITY,
> > + POWER_SUPPLY_PROP_TEMP,
> > +};
> > +
> > +static int bq27x00_read(u8 reg, int *rt_value, int b_single,
> > + struct bq27x00_device_info *di);
> > +
> > +#if defined(BATTERY_BQ27000)
> > +static int bq27000_battery_probe(struct platform_device *dev);
> > +static int bq27000_battery_remove(struct platform_device *dev);
> > +#ifdef CONFIG_PM
> > +static int bq27000_battery_suspend(struct platform_device *dev,
> > + pm_message_t state);
> > +static int bq27000_battery_resume(struct platform_device *dev);
> > +#endif
> > +
> > +static struct platform_driver bq27000_battery_driver = {
> > + .probe = bq27000_battery_probe,
> > + .remove = bq27000_battery_remove,
> > +#ifdef CONFIG_PM
> > + .suspend = bq27000_battery_suspend,
> > + .resume = bq27000_battery_resume,
> > +#endif
> > + .driver = {
> > + .name = "bq27000-bat",
> > + },
> > +};
> > +#endif
> > +
> > +#if defined(BATTERY_BQ27200)
> > +static int bq27200_battery_probe(struct i2c_client *client);
> > +static int bq27200_battery_remove(struct i2c_client *client);
> > +static int bq27200_battery_suspend(struct i2c_client *client,
> > + pm_message_t mesg);
> > +static int bq27200_battery_resume(struct i2c_client *client);
> > +static struct i2c_driver bq27200_battery_driver = {
> > + .driver = {
> > + .name = "bq27200-bat",
> > + },
> > + .probe = bq27200_battery_probe,
> > + .remove = bq27200_battery_remove,
> > +#ifdef CONFIG_PM
> > + .suspend = bq27200_battery_suspend,
> > + .resume = bq27200_battery_resume,
> > +#endif
> > +};
> > +#endif
> > +
> > +/*
> > + * Return the battery temperature in Celcius degrees
> > + * Or < 0 if something fails.
> > + */
> > +static int bq27x00_battery_temperature(struct
> bq27x00_device_info *di)
> > +{
> > + int ret, temp = 0;
> > +
> > + ret = bq27x00_read(BQ27x00_REG_TEMP, &temp, 0, di);
> > + if (ret) {
> > + pr_err("BQ27x00 battery driver:"
> > + "Error reading temperature from the battery\n");
> > + return ret;
> > + }
> > +
> > + return (temp >> 2) - 273;
> > +}
> > +
> > +/*
> > + * Return the battery Voltage in milivolts
> > + * Or < 0 if something fails.
> > + */
> > +static int bq27x00_battery_voltage(struct bq27x00_device_info *di)
> > +{
> > + int ret, volt = 0;
> > +
> > + ret = bq27x00_read(BQ27x00_REG_VOLT, &volt, 0, di);
> > + if (ret) {
> > + pr_err("BQ27x00 battery driver:"
> > + "Error reading battery voltage from the
> battery\n");
> > + return ret;
> > + }
> > +
> > + return volt;
> > +}
> > +
> > +/*
> > + * Return the battery average current
> > + * Note that current can be negative signed as well
> > + * Or 0 if something fails.
> > + */
> > +static int bq27x00_battery_current(struct bq27x00_device_info *di)
> > +{
> > + int ret, curr = 0, flags = 0;
> > +
> > + ret = bq27x00_read(BQ27x00_REG_AI, &curr, 0, di);
> > + if (ret) {
> > + pr_err("BQ27x00 battery driver:"
> > + "Error reading current from the battery\n");
> > + return 0;
> > + }
> > + ret = bq27x00_read(BQ27x00_REG_FLAGS, &flags, 0, di);
> > + if (ret < 0) {
> > + pr_err("BQ27x00 battery driver:"
> > + "Error reading battery flags\n");
> > + return 0;
> > + }
> > + if ((flags & (1 << 7)) != 0) {
> > + pr_debug("Negative current\n");
> > + return -curr;
> > + } else {
> > + return curr;
> > + }
> > +}
> > +
> > +/*
> > + * Return the battery Relative State-of-Charge
> > + * Or < 0 if something fails.
> > + */
> > +static int bq27x00_battery_rsoc(struct bq27x00_device_info *di)
> > +{
> > + int ret, rsoc = 0;
> > +
> > + ret = bq27x00_read(BQ27x00_REG_RSOC, &rsoc, 1, di);
> > + if (ret) {
> > + pr_err("BQ27x00 battery driver:"
> > + "Error reading battery Relative"
> > + "State-of-Charge\n");
> > + return ret;
> > + }
> > + return rsoc;
> > +}
> > +
> > +#if defined(BATTERY_BQ27000)
> > +static int bq27000_read(u8 reg, int *rt_value, int b_single,
> > + struct bq27x00_device_info *di)
> > +{
> > + u8 val;
> > +
> > + val = w1_bq27000_read(di->w1_dev, reg);
> > + *rt_value = val;
> > +
> > + if (!b_single) {
> > + val = 0;
> > + val = w1_bq27000_read(di->w1_dev, reg + 1);
> > + *rt_value += HIGH_BYTE((int) val);
> > + }
> > +
> > + return 0;
> > +}
> > +#else
> > +#define bq27000_read NULL
>
> this should be defined as 0 or an static inline int [...] {
> return 0; }
>
> > +#endif
> > +
> > +#if defined(BATTERY_BQ27200)
> > +static int bq27200_read(u8 reg, int *rt_value, int b_single,
> > + struct bq27x00_device_info *di)
> > +{
> > + struct i2c_client *client = di->client;
> > + struct i2c_msg msg[1];
> > + unsigned char data[2];
> > + int err;
> > +
> > + if (!client->adapter)
> > + return -ENODEV;
> > +
> > + msg->addr = client->addr;
> > + msg->flags = 0;
> > + msg->len = 1;
> > + msg->buf = data;
> > +
> > + data[0] = reg;
> > + err = i2c_transfer(client->adapter, msg, 1);
> > +
> > + if (err >= 0) {
> > + if (!b_single)
> > + msg->len = 2;
> > + else
> > + msg->len = 1;
> > +
> > + msg->flags = I2C_M_RD;
> > + err = i2c_transfer(client->adapter, msg, 1);
> > + if (err >= 0) {
> > + if (!b_single)
> > + *rt_value = data[1] |
> HIGH_BYTE(data[0]);
> > + else
> > + *rt_value = data[0];
> > +
> > + return 0;
> > + } else {
> > + pr_err("BQ27200 I2C read failed\n");
> > + return err;
> > + }
> > + } else {
> > + pr_err("BQ27200 I2C write failed\n");
> > + return err;
> > + }
> > +}
> > +#else
> > +#define bq27200_read NULL
>
> same here
>
> > +#endif
> > +
> > +static int bq27x00_read(u8 reg, int *rt_value, int b_single,
> > + struct bq27x00_device_info *di)
> > +{
> > + int ret;
> > +
> > + ret = di->bus->read(reg, rt_value, b_single, di);
> > + return ret;
> > +}
> > +
> > +/*
> > + * Read the battery temp, voltage, current and relative
> state of charge.
> > + */
> > +static void bq27x00_battery_read_status(struct
> bq27x00_device_info *di)
> > +{
> > + if (di->update_time && time_before(jiffies, di->update_time +
> > + msecs_to_jiffies(cache_time)))
> > + return;
> > +
> > + di->temp_C = bq27x00_battery_temperature(di);
> > + di->voltage_uV = bq27x00_battery_voltage(di);
> > + di->current_uA = bq27x00_battery_current(di);
> > + di->charge_rsoc = bq27x00_battery_rsoc(di);
> > +
> > + di->update_time = jiffies;
> > +
> > + return;
> > +}
> > +
> > +static void bq27x00_battery_work(struct delayed_work *work)
> > +{
> > + struct bq27x00_device_info *di = container_of(work,
> > + struct bq27x00_device_info, monitor_work);
> > +
> > + bq27x00_battery_read_status(di);
> > + schedule_delayed_work(&di->monitor_work, 100);
> > + return;
> > +}
> > +
> > +#define to_bq27x00_device_info(x) container_of((x), \
> > + struct bq27x00_device_info, bat);
> > +
> > +static int bq27x00_battery_get_property(struct power_supply *psy,
> > + enum power_supply_property psp,
> > + union power_supply_propval *val)
> > +{
> > + struct bq27x00_device_info *di = to_bq27x00_device_info(psy);
> > +
> > + switch (psp) {
> > + case POWER_SUPPLY_PROP_VOLTAGE_NOW:
> > + val->intval = di->voltage_uV;
> > + break;
> > + case POWER_SUPPLY_PROP_CURRENT_NOW:
> > + val->intval = di->current_uA;
> > + break;
> > + case POWER_SUPPLY_PROP_CHARGE_NOW:
> > + val->intval = di->charge_rsoc;
> > + break;
> > + case POWER_SUPPLY_PROP_TEMP:
> > + val->intval = di->temp_C;
> > + break;
> > + case POWER_SUPPLY_PROP_CAPACITY:
> > + val->intval = di->charge_rsoc;
> > + break;
> > + case POWER_SUPPLY_PROP_PRESENT:
> > + if (di->voltage_uV == 0)
> > + val->intval = 0;
> > + else
> > + val->intval = 1;
> > + break;
> > + default:
> > + return -EINVAL;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static void bq27x00_powersupply_init(struct
> bq27x00_device_info *di)
> > +{
> > + di->bat.type = POWER_SUPPLY_TYPE_BATTERY;
> > + di->bat.properties = bq27x00_battery_props;
> > + di->bat.num_properties = ARRAY_SIZE(bq27x00_battery_props);
> > + di->bat.get_property = bq27x00_battery_get_property;
> > + di->bat.external_power_changed = NULL;
> > + return;
> > +}
> > +
> > +#ifdef BATTERY_BQ27200
> > +static int bq27200_battery_probe(struct i2c_client *client)
> > +{
> > + struct bq27x00_device_info *di;
> > + struct bq27x00_access_methods *bus;
> > + int retval = 0;
> > +
> > + di = kzalloc(sizeof(*di), GFP_KERNEL);
> > + if (!di) {
> > + pr_err("BQ27000 battery driver:"
> > + "Failed to allocate device info structure\n");
> > + return -ENOMEM;
> > + }
> > +
> > + bus = kzalloc(sizeof(*bus), GFP_KERNEL);
> > + if (!bus) {
> > + pr_err("BQ27000 battery driver:"
> > + "Failed to allocate access method structure\n");
> > + kfree(di);
> > + return -ENOMEM;
> > + }
> > +
> > + i2c_set_clientdata(client, di);
> > + di->dev = &client->dev;
> > + di->bat.name = "bq27200";
> > + bus->read = &bq27200_read;
> > + di->bus = bus;
> > + di->client = client;
> > +
> > + bq27x00_powersupply_init(di);
> > +
> > + retval = power_supply_register(&client->dev, &di->bat);
> > + if (retval) {
> > + pr_err("BQ27200 battery driver: Failed to
> register battery\n");
> > + goto batt_failed;
> > + }
> > +
> > + INIT_DELAYED_WORK(&di->monitor_work, bq27x00_battery_work);
> > + schedule_delayed_work(&di->monitor_work, 100);
> > +
> > + return 0;
> > +
> > +batt_failed:
> > + kfree(bus);
> > + kfree(di);
> > + return retval;
> > +}
> > +
> > +static int bq27200_battery_remove(struct i2c_client *client)
> > +{
> > + struct bq27x00_device_info *di = i2c_get_clientdata(client);
> > +
> > + flush_scheduled_work();
> > + power_supply_unregister(&di->bat);
> > + kfree(di);
> > +
> > + return 0;
> > +}
> > +
> > +#ifdef CONFIG_PM
> > +static int bq27200_battery_suspend(struct i2c_client *client,
> > pm_message_t mesg)
> > +{
> > + struct bq27x00_device_info *di = i2c_get_clientdata(client);
> > +
> > + cancel_delayed_work(&di->monitor_work);
> > + return 0;
> > +}
> > +
> > +static int bq27200_battery_resume(struct i2c_client *client)
> > +{
> > + struct bq27x00_device_info *di = i2c_get_clientdata(client);
> > +
> > + schedule_delayed_work(&di->monitor_work, 0);
> > + return 0;
> > +}
> > +#endif
> > +#endif
>
> put a comment indicating which ifdef you're closing, like:
>
> #endif /* CONFIG_PM */
>
> > +
> > +#ifdef BATTERY_BQ27000
> > +static int bq27000_battery_probe(struct platform_device *pdev)
> > +{
> > + struct bq27x00_device_info *di;
> > + struct bq27x00_access_methods *bus;
> > + int retval = 0;
> > +
> > + di = kzalloc(sizeof(*di), GFP_KERNEL);
> > + if (!di) {
> > + pr_err("BQ27000 battery driver:"
> > + "Failed to allocate device info structure\n");
> > + return -ENOMEM;
> > + }
> > +
> > + bus = kzalloc(sizeof(*bus), GFP_KERNEL);
> > + if (!bus) {
> > + pr_err("BQ27000 battery driver:"
> > + "Failed to allocate access method structure\n");
> > + kfree(di);
> > + return -ENOMEM;
> > + }
> > +
> > + platform_set_drvdata(pdev, di);
> > +
> > + di->dev = &pdev->dev;
> > + di->w1_dev = pdev->dev.parent;
> > + di->bat.name = "bq27000";
> > + bus->read = &bq27000_read;
> > + di->bus = bus;
> > +
> > + bq27x00_powersupply_init(di);
> > +
> > + retval = power_supply_register(&pdev->dev, &di->bat);
> > + if (retval) {
> > + pr_err("BQ27000 battery driver: Failed to
> register battery\n");
> > + goto batt_failed;
> > + }
> > +
> > + INIT_DELAYED_WORK(&di->monitor_work, bq27x00_battery_work);
> > + schedule_delayed_work(&di->monitor_work, 50);
> > +
> > + return 0;
> > +
> > +batt_failed:
> > + kfree(bus);
> > + kfree(di);
> > + return retval;
> > +}
> > +
> > +static int bq27000_battery_remove(struct platform_device *pdev)
> > +{
> > + struct bq27x00_device_info *di = platform_get_drvdata(pdev);
> > +
> > + flush_scheduled_work();
> > + power_supply_unregister(&di->bat);
> > + platform_set_drvdata(pdev, NULL);
> > + kfree(di);
> > +
> > + return 0;
> > +}
> > +
> > +#ifdef CONFIG_PM
> > +static int bq27000_battery_suspend(struct platform_device *pdev,
> > + pm_message_t state)
> > +{
> > + struct bq27x00_device_info *di = platform_get_drvdata(pdev);
> > +
> > + cancel_delayed_work(&di->monitor_work);
> > + return 0;
> > +}
> > +
> > +static int bq27000_battery_resume(struct platform_device *pdev)
> > +{
> > + struct bq27x00_device_info *di = platform_get_drvdata(pdev);
> > +
> > + schedule_delayed_work(&di->monitor_work, 0);
> > + return 0;
> > +}
> > +#endif
> > +#endif
> > +
> > +static int __init bq27x00_battery_init(void)
> > +{
> > + int status = 0;
> > +
> > +#if defined(BATTERY_BQ27000)
> > + status = platform_driver_register(&bq27000_battery_driver);
> > + if (status)
> > + printk(KERN_ERR "Unable to register BQ27000 driver\n");
> > +#endif
> > +#if defined(BATTERY_BQ27200)
> > + status = i2c_add_driver(&bq27200_battery_driver);
> > + printk(KERN_ERR "Unable to register BQ27200 driver\n");
> > +#endif
> > + return status;
> > +}
> > +
> > +static void __exit bq27x00_battery_exit(void)
> > +{
> > +#if defined(BATTERY_BQ27000)
> > + platform_driver_unregister(&bq27000_battery_driver);
> > +#endif
> > +#if defined(BATTERY_BQ27200)
> > + i2c_del_driver(&bq27200_battery_driver);
> > +#endif
> > +}
> > +
> > +module_init(bq27x00_battery_init);
> > +module_exit(bq27x00_battery_exit);
> > +
> > +MODULE_AUTHOR("Texas Instruments");
> > +MODULE_DESCRIPTION("BQ27x00 battery moniter driver");
> > +MODULE_LICENSE("GPL");
> > Index: linux-omap-2.6/drivers/power/Kconfig
> > ===================================================================
> > --- linux-omap-2.6.orig/drivers/power/Kconfig 2008-04-08
> > 17:15:04.000000000 +0530
> > +++ linux-omap-2.6/drivers/power/Kconfig 2008-04-21
> 08:25:00.000000000
> > +0530
> > @@ -49,4 +49,25 @@
> > help
> > Say Y to enable support for the battery on the OLPC laptop.
> >
> > +config BATTERY_BQ27x00
> > + tristate "BQ27x00 battery driver"
> > + help
> > + Say Y here to enable support for batteries with
> BQ27000 or BQ27200
> > chip.
> > +
> > +config BATTERY_BQ27000
> > + bool "BQ27000 battery driver"
> > + depends on BATTERY_BQ27x00
> > + select W1
> > + select W1_SLAVE_BQ27000
> > + help
> > + Say Y here to enable support for batteries with
> BQ27000(HDQ) chip.
> > +
> > +config BATTERY_BQ27200
> > + bool "BQ27200 battery driver"
> > + depends on BATTERY_BQ27x00
> > + select I2C
> > + select I2C_OMAP
> > + help
> > + Say Y here to enable support for batteries with
> BQ27200(I2C) chip.
> > +
> > endif # POWER_SUPPLY
> > Index: linux-omap-2.6/drivers/power/Makefile
> > ===================================================================
> > --- linux-omap-2.6.orig/drivers/power/Makefile 2008-04-08
> > 17:15:04.000000000 +0530
> > +++ linux-omap-2.6/drivers/power/Makefile 2008-04-20
> 17:03:51.000000000
> > +0530
> > @@ -20,3 +20,4 @@
> > obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o
> > obj-$(CONFIG_BATTERY_PMU) += pmu_battery.o
> > obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o
> > +obj-$(CONFIG_BATTERY_BQ27x00) += bq27x00_battery.o
> > Index: linux-omap-2.6/drivers/w1/slaves/w1_bq27000.c
> > ===================================================================
> > --- linux-omap-2.6.orig/drivers/w1/slaves/w1_bq27000.c
> 2008-04-08
> > 17:15:05.000000000 +0530
> > +++ linux-omap-2.6/drivers/w1/slaves/w1_bq27000.c 2008-04-20
> > 17:08:55.000000000 +0530
> > @@ -59,7 +59,7 @@
> > int id = 1;
> > struct platform_device *pdev;
> >
> > - pdev = platform_device_alloc("omap-bq2700-battery", id);
> > + pdev = platform_device_alloc("bq27000-bat", id);
>
> do you really need to change the name here?
> It seems that this change doesn't belong to this patch.
>
> > if (!pdev) {
> > ret = -ENOMEM;
> > return ret;
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe
> linux-omap" in
> > the body of a message to majordomo@xxxxxxxxxxxxxxx
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> --
> Best Regards,
>
> Felipe Balbi
> http://felipebalbi.com
> me@xxxxxxxxxxxxxxx
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
