Re: [PATCH 2/2] PLAT-OMAP: MCBSP: Move code mach specific from plat-omap to mach-omap

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

Some comments below.

* Eduardo Valentin <edubezval@xxxxxxxxx> [080414 13:13]:
> From: Eduardo Valentin <eduardo.valentin@xxxxxxxxxxx>
> 
> This patch gets ride of ifdefs on mcbsp.c code.
> It moves the mach specific code to mach-omap*.
> 
> Signed-off-by: Eduardo Valentin <eduardo.valentin@xxxxxxxxxxx>
> ---
>  arch/arm/mach-omap1/Makefile      |    2 +
>  arch/arm/mach-omap1/mcbsp.c       |  202 +++++++++++++++++++++
>  arch/arm/mach-omap2/Makefile      |    2 +
>  arch/arm/mach-omap2/mcbsp.c       |  145 ++++++++++++++++
>  arch/arm/plat-omap/mcbsp.c        |  346 +++++--------------------------------
>  include/asm-arm/arch-omap/mcbsp.h |   19 ++
>  6 files changed, 417 insertions(+), 299 deletions(-)
>  create mode 100644 arch/arm/mach-omap1/mcbsp.c
>  create mode 100644 arch/arm/mach-omap2/mcbsp.c
> 
> diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
> index 6ebf23b..09246a7 100644
> --- a/arch/arm/mach-omap1/Makefile
> +++ b/arch/arm/mach-omap1/Makefile
> @@ -5,6 +5,8 @@
>  # Common support
>  obj-y := io.o id.o clock.o irq.o mux.o serial.o devices.o
>  
> +obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
> +
>  obj-$(CONFIG_OMAP_MPU_TIMER)	+= time.o
>  obj-$(CONFIG_OMAP_32K_TIMER)	+= timer32k.o
>  
> diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
> new file mode 100644
> index 0000000..299f036
> --- /dev/null
> +++ b/arch/arm/mach-omap1/mcbsp.c
> @@ -0,0 +1,202 @@
> +/*
> + * linux/arch/arm/mach-omap1/mcbsp.c
> + *
> + * Copyright (C) 2008 Instituto Nokia de Tecnologia
> + * Contact: Eduardo Valentin <eduardo.valentin@xxxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * Multichannel mode not supported.
> + */
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/clk.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +
> +#include <asm/arch/dma.h>
> +#include <asm/arch/mux.h>
> +#include <asm/arch/cpu.h>
> +#include <asm/arch/mcbsp.h>
> +#include <asm/arch/dsp_common.h>
> +
> +static struct clk *mcbsp_dsp_ck;
> +static struct clk *mcbsp_api_ck;
> +static struct clk *mcbsp_dspxor_ck;
> +
> +static void omap_mcbsp_dsp_request(void)
> +{
> +	if (cpu_is_omap15xx() || cpu_is_omap16xx()) {
> +		int ret;
> +
> +		ret = omap_dsp_request_mem();
> +		if (ret < 0) {
> +			printk(KERN_ERR "Could not get dsp memory: %i\n", ret);
> +			return;
> +		}
> +
> +		clk_enable(mcbsp_dsp_ck);
> +		clk_enable(mcbsp_api_ck);
> +
> +		/* enable 12MHz clock to mcbsp 1 & 3 */
> +		clk_enable(mcbsp_dspxor_ck);
> +
> +		/*
> +		 * DSP external peripheral reset
> +		 * FIXME: This should be moved to dsp code
> +		 */
> +		__raw_writew(__raw_readw(DSP_RSTCT2) | 1 | 1 << 1,
> +			     DSP_RSTCT2);
> +	}
> +}

How about just do an early return and leave out test for
cpu_is_omap15xx/16xx():

if (cpu_is_omap730())
	return;


> +static void omap_mcbsp_dsp_free(void)
> +{
> +	if (cpu_is_omap15xx() || cpu_is_omap16xx()) {
> +		omap_dsp_release_mem();
> +		clk_disable(mcbsp_dspxor_ck);
> +		clk_disable(mcbsp_dsp_ck);
> +		clk_disable(mcbsp_api_ck);
> +	}
> +}

Here too.


> +static int omap1_mcbsp_check(unsigned int id)
> +{
> +	if (cpu_is_omap730()) {
> +		if (id > OMAP_MAX_MCBSP_COUNT - 1) {
> +		       printk(KERN_ERR "OMAP-McBSP: McBSP%d doesn't exist\n",
> +				id + 1);
> +		       return -ENODEV;
> +		}
> +		return 0;
> +	}
> +
> +	if (cpu_is_omap15xx() || cpu_is_omap16xx()) {
> +		if (id > OMAP_MAX_MCBSP_COUNT) {
> +			printk(KERN_ERR "OMAP-McBSP: McBSP%d doesn't exist\n",
> +				id + 1);
> +			return -ENODEV;
> +		}
> +		return 0;
> +	}
> +
> +	return -ENODEV;
> +}
> +
> +static void omap1_mcbsp_request(unsigned int id)
> +{
> +	/*
> +	 * On 1510, 1610 and 1710, McBSP1 and McBSP3
> +	 * are DSP public peripherals.
> +	 */
> +	if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3)
> +		omap_mcbsp_dsp_request();
> +}
> +
> +static void omap1_mcbsp_free(unsigned int id)
> +{
> +	if (cpu_class_is_omap1()) {
> +		if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3)
> +			omap_mcbsp_dsp_free();
> +	}
> +}

Since these are all in mach-omap1, cpu_class_is_omap1() is always true,
so it can be left out.

> +struct omap_mcbsp_board_cfg omap1_mcbsp_cfg = {
> +	.check		= omap1_mcbsp_check,
> +	.request	= omap1_mcbsp_request,
> +	.free		= omap1_mcbsp_free,
> +	.mcbsp_infos	=
> +#ifdef CONFIG_ARCH_OMAP730
> +	{
> +		[0] = {
> +			.virt_base = io_p2v(OMAP730_MCBSP1_BASE),
> +			.dma_rx_sync = OMAP_DMA_MCBSP1_RX,
> +			.dma_tx_sync = OMAP_DMA_MCBSP1_TX,
> +			.rx_irq = INT_730_McBSP1RX,
> +			.tx_irq = INT_730_McBSP1TX,
> +		},
> +		[1] = {
> +			.virt_base = io_p2v(OMAP730_MCBSP2_BASE),
> +			.dma_rx_sync = OMAP_DMA_MCBSP3_RX,
> +			.dma_tx_sync = OMAP_DMA_MCBSP3_TX,
> +			.rx_irq = INT_730_McBSP2RX,
> +			.tx_irq = INT_730_McBSP2TX
> +		},
> +	},
> +#elif defined(CONFIG_ARCH_OMAP15XX)

This should not be #elif, it's possible to compile in support for
multiple boards.


> +	{
> +		[0] = {
> +			.virt_base = OMAP1510_MCBSP1_BASE,
> +			.dma_rx_sync = OMAP_DMA_MCBSP1_RX,
> +			.dma_tx_sync = OMAP_DMA_MCBSP1_TX,
> +			.rx_irq = INT_McBSP1RX,
> +			.tx_irq = INT_McBSP1TX
> +		},
> +		[1] = {
> +			.virt_base = io_p2v(OMAP1510_MCBSP2_BASE),
> +			.dma_rx_sync = OMAP_DMA_MCBSP2_RX,
> +			.dma_tx_sync = OMAP_DMA_MCBSP2_TX,
> +			.rx_irq = INT_1510_SPI_RX,
> +			.tx_irq = INT_1510_SPI_TX
> +		},
> +		[2] = {
> +			.virt_base = OMAP1510_MCBSP3_BASE,
> +			.dma_rx_sync = OMAP_DMA_MCBSP3_RX,
> +			.dma_tx_sync = OMAP_DMA_MCBSP3_TX,
> +			.rx_irq = INT_McBSP3RX,
> +			.tx_irq = INT_McBSP3TX
> +	},
> +#elif defined(CONFIG_ARCH_OMAP16XX)

This too. See how this is handled for example in mux.c.


> +	{
> +		[0] = {
> +			.virt_base = OMAP1610_MCBSP1_BASE,
> +			.dma_rx_sync = OMAP_DMA_MCBSP1_RX,
> +			.dma_tx_sync = OMAP_DMA_MCBSP1_TX,
> +			.rx_irq = INT_McBSP1RX,
> +			.tx_irq = INT_McBSP1TX
> +		},
> +		[1] = {
> +			.virt_base = io_p2v(OMAP1610_MCBSP2_BASE),
> +			.dma_rx_sync = OMAP_DMA_MCBSP2_RX,
> +			.dma_tx_sync = OMAP_DMA_MCBSP2_TX,
> +			.rx_irq = INT_1610_McBSP2_RX,
> +			.tx_irq = INT_1610_McBSP2_TX
> +		},
> +		[2] = {
> +			.virt_base = OMAP1610_MCBSP3_BASE,
> +			.dma_rx_sync = OMAP_DMA_MCBSP3_RX,
> +			.dma_tx_sync = OMAP_DMA_MCBSP3_TX,
> +			.rx_irq = INT_McBSP3RX,
> +			.tx_irq = INT_McBSP3TX
> +		},
> +	},
> +#else
> +NULL /* For .mcbsp_infos */
> +#endif
> +};
> +
> +int __init omap1_mcbsp_init(void)
> +{
> +	mcbsp_dsp_ck = clk_get(0, "dsp_ck");
> +	if (IS_ERR(mcbsp_dsp_ck)) {
> +		printk(KERN_ERR "mcbsp: could not acquire dsp_ck handle.\n");
> +		return PTR_ERR(mcbsp_dsp_ck);
> +	}

I believe this will return error on 730 and init will fail.


> +	mcbsp_api_ck = clk_get(0, "api_ck");
> +	if (IS_ERR(mcbsp_api_ck)) {
> +		printk(KERN_ERR "mcbsp: could not acquire api_ck handle.\n");
> +		return PTR_ERR(mcbsp_api_ck);
> +	}
> +	mcbsp_dspxor_ck = clk_get(0, "dspxor_ck");
> +	if (IS_ERR(mcbsp_dspxor_ck)) {
> +		printk(KERN_ERR "mcbsp: could not acquire dspxor_ck handle.\n");
> +		return PTR_ERR(mcbsp_dspxor_ck);
> +	}

This one too I guess.


> +	omap_mcbsp_register_board_cfg(&omap1_mcbsp_cfg);
> +
> +	return omap_mcbsp_init();
> +}
> +arch_initcall(omap1_mcbsp_init);
> diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
> index 5157ff2..771f8e7 100644
> --- a/arch/arm/mach-omap2/Makefile
> +++ b/arch/arm/mach-omap2/Makefile
> @@ -6,6 +6,8 @@
>  obj-y := irq.o id.o io.o memory.o control.o prcm.o clock.o mux.o \
>  		devices.o serial.o gpmc.o timer-gp.o
>  
> +obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
> +
>  # Functions loaded to SRAM
>  obj-$(CONFIG_ARCH_OMAP2)		+= sram24xx.o
>  
> diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
> new file mode 100644
> index 0000000..8c8b97f
> --- /dev/null
> +++ b/arch/arm/mach-omap2/mcbsp.c
> @@ -0,0 +1,145 @@
> +/*
> + * linux/arch/arm/mach-omap1/mcbsp.c
> + *

Should be mach-omap2 above.


> + * Copyright (C) 2008 Instituto Nokia de Tecnologia
> + * Contact: Eduardo Valentin <eduardo.valentin@xxxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * Multichannel mode not supported.
> + */
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/clk.h>
> +#include <linux/err.h>
> +
> +#include <asm/arch/dma.h>
> +#include <asm/arch/mux.h>
> +#include <asm/arch/cpu.h>
> +#include <asm/arch/mcbsp.h>
> +
> +static struct clk *mcbsp1_ick;
> +static struct clk *mcbsp1_fck;
> +static struct clk *mcbsp2_ick;
> +static struct clk *mcbsp2_fck;
> +
> +static void omap2_mcbsp2_mux_setup(void)
> +{
> +	if (cpu_is_omap2420()) {
> +		omap_cfg_reg(Y15_24XX_MCBSP2_CLKX);
> +		omap_cfg_reg(R14_24XX_MCBSP2_FSX);
> +		omap_cfg_reg(W15_24XX_MCBSP2_DR);
> +		omap_cfg_reg(V15_24XX_MCBSP2_DX);
> +		omap_cfg_reg(V14_24XX_GPIO117);
> +	}
> +	/*
> +	 * Need to add MUX settings for OMAP 2430 SDP
> +	 */
> +}
> +
> +static int omap2_mcbsp_check(unsigned int id)
> +{
> +	if (cpu_class_is_omap2()) {
> +		if (id > OMAP_MAX_MCBSP_COUNT) {
> +			printk(KERN_ERR "OMAP-McBSP: McBSP%d doesn't exist\n",
> +				id + 1);
> +			return -ENODEV;
> +		}
> +		return 0;
> +	}
> +
> +	return -ENODEV;
> +}

The cpu_class_is_omap2() above is not needed, it's always true.


> +static void omap2_mcbsp_request(unsigned int id)
> +{
> +	if (cpu_class_is_omap2()) {
> +		if (id == OMAP_MCBSP1) {
> +			clk_enable(mcbsp1_ick);
> +			clk_enable(mcbsp1_fck);
> +		} else {
> +			clk_enable(mcbsp2_ick);
> +			clk_enable(mcbsp2_fck);
> +		}
> +	}
> +}

Here too. And a line break is missing between this and next function.


> +static void omap2_mcbsp_free(unsigned int id)
> +{
> +	if (cpu_class_is_omap2()) {
> +		if (id == OMAP_MCBSP1) {
> +			clk_disable(mcbsp1_ick);
> +			clk_disable(mcbsp1_fck);
> +		} else {
> +			clk_disable(mcbsp2_ick);
> +			clk_disable(mcbsp2_fck);
> +		}
> +	}
> +}

Unnecessary cpu_class_is_omap2() here too.


> +static const struct omap_mcbsp_board_cfg mcbsp_24xx_cfg = {
> +	.check		= omap2_mcbsp_check,
> +	.request	= omap2_mcbsp_request,
> +	.free		= omap2_mcbsp_free,
> +	.mcbsp_infos	= {
> +		[0] = {
> +#if defined(CONFIG_ARCH_OMAP24XX)
> +			.virt_base = IO_ADDRESS(OMAP24XX_MCBSP1_BASE),
> +#elif defined(CONFIG_ARCH_OMAP34XX)
> +			.virt_base = IO_ADDRESS(OMAP34XX_MCBSP1_BASE),
> +#endif

This #elif will add artificial blocker to compile in both 24xx and 34xx.


> +			.dma_rx_sync = OMAP24XX_DMA_MCBSP1_RX,
> +			.dma_tx_sync = OMAP24XX_DMA_MCBSP1_TX,
> +			.rx_irq = INT_24XX_MCBSP1_IRQ_RX,
> +			.tx_irq = INT_24XX_MCBSP1_IRQ_TX,
> +		},
> +		[1] = {
> +#if defined(CONFIG_ARCH_OMAP24XX)
> +			.virt_base = IO_ADDRESS(OMAP24XX_MCBSP2_BASE),
> +#elif defined(CONFIG_ARCH_OMAP34XX)
> +			.virt_base = IO_ADDRESS(OMAP34XX_MCBSP2_BASE),
> +#endif

Here too.


> +			.dma_rx_sync = OMAP24XX_DMA_MCBSP2_RX,
> +			.dma_tx_sync = OMAP24XX_DMA_MCBSP2_TX,
> +			.rx_irq = INT_24XX_MCBSP2_IRQ_RX,
> +			.tx_irq = INT_24XX_MCBSP2_IRQ_TX,
> +		},
> +	},
> +};
> +
> +int __init omap2_mcbsp_init(void)
> +{
> +	mcbsp1_ick = clk_get(0, "mcbsp1_ick");
> +	if (IS_ERR(mcbsp1_ick)) {
> +		printk(KERN_ERR "mcbsp: could not acquire "
> +				"mcbsp1_ick handle.\n");
> +		return PTR_ERR(mcbsp1_ick);
> +	}
> +	mcbsp1_fck = clk_get(0, "mcbsp1_fck");
> +	if (IS_ERR(mcbsp1_fck)) {
> +		printk(KERN_ERR "mcbsp: could not acquire "
> +				"mcbsp1_fck handle.\n");
> +		return PTR_ERR(mcbsp1_fck);
> +	}
> +	mcbsp2_ick = clk_get(0, "mcbsp2_ick");
> +	if (IS_ERR(mcbsp2_ick)) {
> +		printk(KERN_ERR "mcbsp: could not acquire "
> +				"mcbsp2_ick handle.\n");
> +		return PTR_ERR(mcbsp2_ick);
> +	}
> +	mcbsp2_fck = clk_get(0, "mcbsp2_fck");
> +	if (IS_ERR(mcbsp2_fck)) {
> +		printk(KERN_ERR "mcbsp: could not acquire "
> +				"mcbsp2_fck handle.\n");
> +		return PTR_ERR(mcbsp2_fck);
> +	}
> +
> +	if (cpu_class_is_omap2()) {
> +		omap_mcbsp_register_board_cfg(&mcbsp_24xx_cfg);
> +		omap2_mcbsp2_mux_setup();
> +	}

Unnecessary cpu_class_is_omap2() here too.


> +	return omap_mcbsp_init();
> +}
> +arch_initcall(omap2_mcbsp_init);
> diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
> index 053de31..fdba002 100644
> --- a/arch/arm/plat-omap/mcbsp.c
> +++ b/arch/arm/plat-omap/mcbsp.c
> @@ -24,11 +24,8 @@
>  #include <linux/io.h>
>  #include <linux/irq.h>
>  
> -#include <asm/arch/dma.h>
> -#include <asm/arch/mux.h>
> -#include <asm/arch/irqs.h>
> -#include <asm/arch/dsp_common.h>
>  #include <asm/arch/mcbsp.h>
> +#include <asm/arch/dma.h>
>  
>  #ifdef CONFIG_MCBSP_DEBUG
>  #define DBG(x...)	printk(x)
> @@ -65,17 +62,10 @@ struct omap_mcbsp {
>  };
>  
>  static struct omap_mcbsp mcbsp[OMAP_MAX_MCBSP_COUNT];
> -#ifdef CONFIG_ARCH_OMAP1
> -static struct clk *mcbsp_dsp_ck;
> -static struct clk *mcbsp_api_ck;
> -static struct clk *mcbsp_dspxor_ck;
> -#endif
> -#ifdef CONFIG_ARCH_OMAP2
> -static struct clk *mcbsp1_ick;
> -static struct clk *mcbsp1_fck;
> -static struct clk *mcbsp2_ick;
> -static struct clk *mcbsp2_fck;
> -#endif
> +static const struct omap_mcbsp_board_cfg *mcbsp_config;
> +
> +#define omap_mcbsp_check_invalid_id(id)	(mcbsp_config && mcbsp_config->check \
> +					&& (mcbsp_config->check(id) < 0))
>  
>  static void omap_mcbsp_dump_reg(u8 id)
>  {
> @@ -175,90 +165,13 @@ void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg *config)
>  }
>  EXPORT_SYMBOL(omap_mcbsp_config);
>  
> -static int omap_mcbsp_check(unsigned int id)
> -{
> -	if (cpu_is_omap730()) {
> -		if (id > OMAP_MAX_MCBSP_COUNT - 1) {
> -		       printk(KERN_ERR "OMAP-McBSP: McBSP%d doesn't exist\n",
> -				id + 1);
> -		       return -1;
> -		}
> -		return 0;
> -	}
> -
> -	if (cpu_is_omap15xx() || cpu_is_omap16xx() || cpu_is_omap24xx()) {
> -		if (id > OMAP_MAX_MCBSP_COUNT) {
> -			printk(KERN_ERR "OMAP-McBSP: McBSP%d doesn't exist\n",
> -				id + 1);
> -			return -1;
> -		}
> -		return 0;
> -	}
> -
> -	return -1;
> -}
> -
> -#ifdef CONFIG_ARCH_OMAP1
> -static void omap_mcbsp_dsp_request(void)
> -{
> -	if (cpu_is_omap15xx() || cpu_is_omap16xx()) {
> -		int ret;
> -
> -		ret = omap_dsp_request_mem();
> -		if (ret < 0) {
> -			printk(KERN_ERR "Could not get dsp memory: %i\n", ret);
> -			return;
> -		}
> -
> -		clk_enable(mcbsp_dsp_ck);
> -		clk_enable(mcbsp_api_ck);
> -
> -		/* enable 12MHz clock to mcbsp 1 & 3 */
> -		clk_enable(mcbsp_dspxor_ck);
> -
> -		/*
> -		 * DSP external peripheral reset
> -		 * FIXME: This should be moved to dsp code
> -		 */
> -		__raw_writew(__raw_readw(DSP_RSTCT2) | 1 | 1 << 1,
> -			     DSP_RSTCT2);
> -	}
> -}
> -
> -static void omap_mcbsp_dsp_free(void)
> -{
> -	if (cpu_is_omap15xx() || cpu_is_omap16xx()) {
> -		omap_dsp_release_mem();
> -		clk_disable(mcbsp_dspxor_ck);
> -		clk_disable(mcbsp_dsp_ck);
> -		clk_disable(mcbsp_api_ck);
> -	}
> -}
> -#endif
> -
> -#ifdef CONFIG_ARCH_OMAP2
> -static void omap2_mcbsp2_mux_setup(void)
> -{
> -	if (cpu_is_omap2420()) {
> -		omap_cfg_reg(Y15_24XX_MCBSP2_CLKX);
> -		omap_cfg_reg(R14_24XX_MCBSP2_FSX);
> -		omap_cfg_reg(W15_24XX_MCBSP2_DR);
> -		omap_cfg_reg(V15_24XX_MCBSP2_DX);
> -		omap_cfg_reg(V14_24XX_GPIO117);
> -	}
> -	/*
> -	 * Need to add MUX settings for OMAP 2430 SDP
> -	 */
> -}
> -#endif
> -
>  /*
>   * We can choose between IRQ based or polled IO.
>   * This needs to be called before omap_mcbsp_request().
>   */
>  int omap_mcbsp_set_io_type(unsigned int id, omap_mcbsp_io_type_t io_type)
>  {
> -	if (omap_mcbsp_check(id) < 0)
> +	if (omap_mcbsp_check_invalid_id(id))
>  		return -EINVAL;
>  
>  	spin_lock(&mcbsp[id].lock);
> @@ -282,29 +195,11 @@ int omap_mcbsp_request(unsigned int id)
>  {
>  	int err;
>  
> -	if (omap_mcbsp_check(id) < 0)
> +	if (omap_mcbsp_check_invalid_id(id))
>  		return -EINVAL;
>  
> -#ifdef CONFIG_ARCH_OMAP1
> -	/*
> -	 * On 1510, 1610 and 1710, McBSP1 and McBSP3
> -	 * are DSP public peripherals.
> -	 */
> -	if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3)
> -		omap_mcbsp_dsp_request();
> -#endif
> -
> -#ifdef CONFIG_ARCH_OMAP2
> -	if (cpu_is_omap24xx()) {
> -		if (id == OMAP_MCBSP1) {
> -			clk_enable(mcbsp1_ick);
> -			clk_enable(mcbsp1_fck);
> -		} else {
> -			clk_enable(mcbsp2_ick);
> -			clk_enable(mcbsp2_fck);
> -		}
> -	}
> -#endif
> +	if (mcbsp_config && mcbsp_config->request)
> +		mcbsp_config->request(id);
>  
>  	spin_lock(&mcbsp[id].lock);
>  	if (!mcbsp[id].free) {
> @@ -349,27 +244,11 @@ EXPORT_SYMBOL(omap_mcbsp_request);
>  
>  void omap_mcbsp_free(unsigned int id)
>  {
> -	if (omap_mcbsp_check(id) < 0)
> +	if (omap_mcbsp_check_invalid_id(id))
>  		return;
>  
> -#ifdef CONFIG_ARCH_OMAP1
> -	if (cpu_class_is_omap1()) {
> -		if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3)
> -			omap_mcbsp_dsp_free();
> -	}
> -#endif
> -
> -#ifdef CONFIG_ARCH_OMAP2
> -	if (cpu_is_omap24xx()) {
> -		if (id == OMAP_MCBSP1) {
> -			clk_disable(mcbsp1_ick);
> -			clk_disable(mcbsp1_fck);
> -		} else {
> -			clk_disable(mcbsp2_ick);
> -			clk_disable(mcbsp2_fck);
> -		}
> -	}
> -#endif
> +	if (mcbsp_config && mcbsp_config->free)
> +		mcbsp_config->free(id);
>  
>  	spin_lock(&mcbsp[id].lock);
>  	if (mcbsp[id].free) {
> @@ -400,7 +279,7 @@ void omap_mcbsp_start(unsigned int id)
>  	u32 io_base;
>  	u16 w;
>  
> -	if (omap_mcbsp_check(id) < 0)
> +	if (omap_mcbsp_check_invalid_id(id))
>  		return;
>  
>  	io_base = mcbsp[id].io_base;
> @@ -435,7 +314,7 @@ void omap_mcbsp_stop(unsigned int id)
>  	u32 io_base;
>  	u16 w;
>  
> -	if (omap_mcbsp_check(id) < 0)
> +	if (omap_mcbsp_check_invalid_id(id))
>  		return;
>  
>  	io_base = mcbsp[id].io_base;
> @@ -533,7 +412,7 @@ void omap_mcbsp_xmit_word(unsigned int id, u32 word)
>  	u32 io_base;
>  	omap_mcbsp_word_length word_length = mcbsp[id].tx_word_length;
>  
> -	if (omap_mcbsp_check(id) < 0)
> +	if (omap_mcbsp_check_invalid_id(id))
>  		return;
>  
>  	io_base = mcbsp[id].io_base;
> @@ -552,7 +431,7 @@ u32 omap_mcbsp_recv_word(unsigned int id)
>  	u16 word_lsb, word_msb = 0;
>  	omap_mcbsp_word_length word_length = mcbsp[id].rx_word_length;
>  
> -	if (omap_mcbsp_check(id) < 0)
> +	if (omap_mcbsp_check_invalid_id(id))
>  		return -EINVAL;
>  
>  	io_base = mcbsp[id].io_base;
> @@ -692,7 +571,7 @@ int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer,
>  	int dest_port = 0;
>  	int sync_dev = 0;
>  
> -	if (omap_mcbsp_check(id) < 0)
> +	if (omap_mcbsp_check_invalid_id(id))
>  		return -EINVAL;
>  
>  	if (omap_request_dma(mcbsp[id].dma_tx_sync, "McBSP TX",
> @@ -713,7 +592,7 @@ int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer,
>  		src_port = OMAP_DMA_PORT_TIPB;
>  		dest_port = OMAP_DMA_PORT_EMIFF;
>  	}
> -	if (cpu_is_omap24xx())
> +	if (cpu_class_is_omap2())
>  		sync_dev = mcbsp[id].dma_tx_sync;
>  
>  	omap_set_dma_transfer_params(mcbsp[id].dma_tx_lch,
> @@ -749,7 +628,7 @@ int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer,
>  	int dest_port = 0;
>  	int sync_dev = 0;
>  
> -	if (omap_mcbsp_check(id) < 0)
> +	if (omap_mcbsp_check_invalid_id(id))
>  		return -EINVAL;
>  
>  	if (omap_request_dma(mcbsp[id].dma_rx_sync, "McBSP RX",
> @@ -770,7 +649,7 @@ int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer,
>  		src_port = OMAP_DMA_PORT_TIPB;
>  		dest_port = OMAP_DMA_PORT_EMIFF;
>  	}
> -	if (cpu_is_omap24xx())
> +	if (cpu_class_is_omap2())
>  		sync_dev = mcbsp[id].dma_rx_sync;
>  
>  	omap_set_dma_transfer_params(mcbsp[id].dma_rx_lch,
> @@ -809,7 +688,7 @@ void omap_mcbsp_set_spi_mode(unsigned int id,
>  {
>  	struct omap_mcbsp_reg_cfg mcbsp_cfg;
>  
> -	if (omap_mcbsp_check(id) < 0)
> +	if (omap_mcbsp_check_invalid_id(id))
>  		return;
>  
>  	memset(&mcbsp_cfg, 0, sizeof(struct omap_mcbsp_reg_cfg));
> @@ -871,162 +750,19 @@ EXPORT_SYMBOL(omap_mcbsp_set_spi_mode);
>   * McBSP1 and McBSP3 are directly mapped on 1610 and 1510.
>   * 730 has only 2 McBSP, and both of them are MPU peripherals.
>   */
> -struct omap_mcbsp_info {
> -	u32 virt_base;
> -	u8 dma_rx_sync, dma_tx_sync;
> -	u16 rx_irq, tx_irq;
> -};
> -
> -#ifdef CONFIG_ARCH_OMAP730
> -static const struct omap_mcbsp_info mcbsp_730[] = {
> -	[0] = { .virt_base = io_p2v(OMAP730_MCBSP1_BASE),
> -		.dma_rx_sync = OMAP_DMA_MCBSP1_RX,
> -		.dma_tx_sync = OMAP_DMA_MCBSP1_TX,
> -		.rx_irq = INT_730_McBSP1RX,
> -		.tx_irq = INT_730_McBSP1TX },
> -	[1] = { .virt_base = io_p2v(OMAP730_MCBSP2_BASE),
> -		.dma_rx_sync = OMAP_DMA_MCBSP3_RX,
> -		.dma_tx_sync = OMAP_DMA_MCBSP3_TX,
> -		.rx_irq = INT_730_McBSP2RX,
> -		.tx_irq = INT_730_McBSP2TX },
> -};
> -#endif
> -
> -#ifdef CONFIG_ARCH_OMAP15XX
> -static const struct omap_mcbsp_info mcbsp_1510[] = {
> -	[0] = { .virt_base = OMAP1510_MCBSP1_BASE,
> -		.dma_rx_sync = OMAP_DMA_MCBSP1_RX,
> -		.dma_tx_sync = OMAP_DMA_MCBSP1_TX,
> -		.rx_irq = INT_McBSP1RX,
> -		.tx_irq = INT_McBSP1TX },
> -	[1] = { .virt_base = io_p2v(OMAP1510_MCBSP2_BASE),
> -		.dma_rx_sync = OMAP_DMA_MCBSP2_RX,
> -		.dma_tx_sync = OMAP_DMA_MCBSP2_TX,
> -		.rx_irq = INT_1510_SPI_RX,
> -		.tx_irq = INT_1510_SPI_TX },
> -	[2] = { .virt_base = OMAP1510_MCBSP3_BASE,
> -		.dma_rx_sync = OMAP_DMA_MCBSP3_RX,
> -		.dma_tx_sync = OMAP_DMA_MCBSP3_TX,
> -		.rx_irq = INT_McBSP3RX,
> -		.tx_irq = INT_McBSP3TX },
> -};
> -#endif
> -
> -#if defined(CONFIG_ARCH_OMAP16XX)
> -static const struct omap_mcbsp_info mcbsp_1610[] = {
> -	[0] = { .virt_base = OMAP1610_MCBSP1_BASE,
> -		.dma_rx_sync = OMAP_DMA_MCBSP1_RX,
> -		.dma_tx_sync = OMAP_DMA_MCBSP1_TX,
> -		.rx_irq = INT_McBSP1RX,
> -		.tx_irq = INT_McBSP1TX },
> -	[1] = { .virt_base = io_p2v(OMAP1610_MCBSP2_BASE),
> -		.dma_rx_sync = OMAP_DMA_MCBSP2_RX,
> -		.dma_tx_sync = OMAP_DMA_MCBSP2_TX,
> -		.rx_irq = INT_1610_McBSP2_RX,
> -		.tx_irq = INT_1610_McBSP2_TX },
> -	[2] = { .virt_base = OMAP1610_MCBSP3_BASE,
> -		.dma_rx_sync = OMAP_DMA_MCBSP3_RX,
> -		.dma_tx_sync = OMAP_DMA_MCBSP3_TX,
> -		.rx_irq = INT_McBSP3RX,
> -		.tx_irq = INT_McBSP3TX },
> -};
> -#endif
> -
> -#if defined(CONFIG_ARCH_OMAP24XX)
> -static const struct omap_mcbsp_info mcbsp_24xx[] = {
> -	[0] = { .virt_base = IO_ADDRESS(OMAP24XX_MCBSP1_BASE),
> -		.dma_rx_sync = OMAP24XX_DMA_MCBSP1_RX,
> -		.dma_tx_sync = OMAP24XX_DMA_MCBSP1_TX,
> -		.rx_irq = INT_24XX_MCBSP1_IRQ_RX,
> -		.tx_irq = INT_24XX_MCBSP1_IRQ_TX,
> -		},
> -	[1] = { .virt_base = IO_ADDRESS(OMAP24XX_MCBSP2_BASE),
> -		.dma_rx_sync = OMAP24XX_DMA_MCBSP2_RX,
> -		.dma_tx_sync = OMAP24XX_DMA_MCBSP2_TX,
> -		.rx_irq = INT_24XX_MCBSP2_IRQ_RX,
> -		.tx_irq = INT_24XX_MCBSP2_IRQ_TX,
> -		},
> -};
> -#endif
> -
> -static int __init omap_mcbsp_init(void)
> +int __init omap_mcbsp_init(void)
>  {
> -	int mcbsp_count = 0, i;
> -	static const struct omap_mcbsp_info *mcbsp_info;
> +	int i;
>  
> -	printk(KERN_INFO "Initializing OMAP McBSP system\n");
> -
> -#ifdef CONFIG_ARCH_OMAP1
> -	mcbsp_dsp_ck = clk_get(0, "dsp_ck");
> -	if (IS_ERR(mcbsp_dsp_ck)) {
> -		printk(KERN_ERR "mcbsp: could not acquire dsp_ck handle.\n");
> -		return PTR_ERR(mcbsp_dsp_ck);
> -	}
> -	mcbsp_api_ck = clk_get(0, "api_ck");
> -	if (IS_ERR(mcbsp_api_ck)) {
> -		printk(KERN_ERR "mcbsp: could not acquire api_ck handle.\n");
> -		return PTR_ERR(mcbsp_api_ck);
> -	}
> -	mcbsp_dspxor_ck = clk_get(0, "dspxor_ck");
> -	if (IS_ERR(mcbsp_dspxor_ck)) {
> -		printk(KERN_ERR "mcbsp: could not acquire dspxor_ck handle.\n");
> -		return PTR_ERR(mcbsp_dspxor_ck);
> -	}
> -#endif
> -#ifdef CONFIG_ARCH_OMAP2
> -	mcbsp1_ick = clk_get(0, "mcbsp1_ick");
> -	if (IS_ERR(mcbsp1_ick)) {
> -		printk(KERN_ERR "mcbsp: could not acquire "
> -				"mcbsp1_ick handle.\n");
> -		return PTR_ERR(mcbsp1_ick);
> -	}
> -	mcbsp1_fck = clk_get(0, "mcbsp1_fck");
> -	if (IS_ERR(mcbsp1_fck)) {
> -		printk(KERN_ERR "mcbsp: could not acquire "
> -				"mcbsp1_fck handle.\n");
> -		return PTR_ERR(mcbsp1_fck);
> -	}
> -	mcbsp2_ick = clk_get(0, "mcbsp2_ick");
> -	if (IS_ERR(mcbsp2_ick)) {
> -		printk(KERN_ERR "mcbsp: could not acquire "
> -				"mcbsp2_ick handle.\n");
> -		return PTR_ERR(mcbsp2_ick);
> -	}
> -	mcbsp2_fck = clk_get(0, "mcbsp2_fck");
> -	if (IS_ERR(mcbsp2_fck)) {
> -		printk(KERN_ERR "mcbsp: could not acquire "
> -				"mcbsp2_fck handle.\n");
> -		return PTR_ERR(mcbsp2_fck);
> +	if (!mcbsp_config) {
> +		printk(KERN_ERR "McBSP initialized without configuration\n");
> +		return -EINVAL;
>  	}
> -#endif
>  
> -#ifdef CONFIG_ARCH_OMAP730
> -	if (cpu_is_omap730()) {
> -		mcbsp_info = mcbsp_730;
> -		mcbsp_count = ARRAY_SIZE(mcbsp_730);
> -	}
> -#endif
> -#ifdef CONFIG_ARCH_OMAP15XX
> -	if (cpu_is_omap15xx()) {
> -		mcbsp_info = mcbsp_1510;
> -		mcbsp_count = ARRAY_SIZE(mcbsp_1510);
> -	}
> -#endif
> -#if defined(CONFIG_ARCH_OMAP16XX)
> -	if (cpu_is_omap16xx()) {
> -		mcbsp_info = mcbsp_1610;
> -		mcbsp_count = ARRAY_SIZE(mcbsp_1610);
> -	}
> -#endif
> -#if defined(CONFIG_ARCH_OMAP24XX)
> -	if (cpu_is_omap24xx()) {
> -		mcbsp_info = mcbsp_24xx;
> -		mcbsp_count = ARRAY_SIZE(mcbsp_24xx);
> -		omap2_mcbsp2_mux_setup();
> -	}
> -#endif
> +	printk(KERN_INFO "Initializing OMAP McBSP system\n");
> +
>  	for (i = 0; i < OMAP_MAX_MCBSP_COUNT ; i++) {
> -		if (i >= mcbsp_count) {
> +		if (i >= ARRAY_SIZE(mcbsp_config->mcbsp_infos)) {
>  			mcbsp[i].io_base = 0;
>  			mcbsp[i].free = 0;
>  			continue;
> @@ -1036,17 +772,29 @@ static int __init omap_mcbsp_init(void)
>  		mcbsp[i].dma_tx_lch = -1;
>  		mcbsp[i].dma_rx_lch = -1;
>  
> -		mcbsp[i].io_base = mcbsp_info[i].virt_base;
> +		mcbsp[i].io_base = mcbsp_config->mcbsp_infos[i].virt_base;
>  		/* Default I/O is IRQ based */
>  		mcbsp[i].io_type = OMAP_MCBSP_IRQ_IO;
> -		mcbsp[i].tx_irq = mcbsp_info[i].tx_irq;
> -		mcbsp[i].rx_irq = mcbsp_info[i].rx_irq;
> -		mcbsp[i].dma_rx_sync = mcbsp_info[i].dma_rx_sync;
> -		mcbsp[i].dma_tx_sync = mcbsp_info[i].dma_tx_sync;
> +		mcbsp[i].tx_irq = mcbsp_config->mcbsp_infos[i].tx_irq;
> +		mcbsp[i].rx_irq = mcbsp_config->mcbsp_infos[i].rx_irq;
> +		mcbsp[i].dma_rx_sync = mcbsp_config->mcbsp_infos[i].dma_rx_sync;
> +		mcbsp[i].dma_tx_sync = mcbsp_config->mcbsp_infos[i].dma_tx_sync;
>  		spin_lock_init(&mcbsp[i].lock);
>  	}
>  
>  	return 0;
>  }
>  
> -arch_initcall(omap_mcbsp_init);
> +int omap_mcbsp_register_board_cfg(const struct omap_mcbsp_board_cfg *config)
> +{
> +	if (!config || !config->request || !config->free) {
> +		printk(KERN_ERR "Invalid McBSP configuration\n");
> +		return -EINVAL;
> +	}
> +
> +	mcbsp_config = config;
> +
> +	return 0;
> +
> +}
> +
> diff --git a/include/asm-arm/arch-omap/mcbsp.h b/include/asm-arm/arch-omap/mcbsp.h
> index b53c3b2..fc53a45 100644
> --- a/include/asm-arm/arch-omap/mcbsp.h
> +++ b/include/asm-arm/arch-omap/mcbsp.h
> @@ -40,6 +40,9 @@
>  #define OMAP24XX_MCBSP1_BASE	0x48074000
>  #define OMAP24XX_MCBSP2_BASE	0x48076000
>  
> +#define OMAP34XX_MCBSP1_BASE	0x48074000
> +#define OMAP34XX_MCBSP2_BASE	0x49022000
> +
>  #if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730)
>  
>  #define OMAP_MCBSP_REG_DRR2	0x00
> @@ -298,6 +301,22 @@ struct omap_mcbsp_spi_cfg {
>  	omap_mcbsp_word_length		word_length;
>  };
>  
> +/* Board specific configuration */
> +struct omap_mcbsp_info {
> +	u32 virt_base;
> +	u8 dma_rx_sync, dma_tx_sync;
> +	u16 rx_irq, tx_irq;
> +};
> +
> +struct omap_mcbsp_board_cfg {
> +	void (*request)(unsigned int);
> +	void (*free)(unsigned int);
> +	int (*check)(unsigned int);
> +	struct omap_mcbsp_info mcbsp_infos[OMAP_MAX_MCBSP_COUNT];
> +};
> +
> +int omap_mcbsp_init(void);
> +int omap_mcbsp_register_board_cfg(const struct omap_mcbsp_board_cfg *config);
>  void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config);
>  int omap_mcbsp_request(unsigned int id);
>  void omap_mcbsp_free(unsigned int id);
> -- 
> 1.5.5-rc3.GIT
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux