* Carlos Aguiar <carlos.aguiar@xxxxxxxxxxx> [080418 13:33]:
> From: Carlos Eduardo Aguiar <carlos.aguiar@xxxxxxxxxxx>
>
> This patch makes the following general code cleanup and cosmetic fixes:
>
> - Use #include <linux/io.h> instead of <asm/io.h>, according to warning
> reported by scripts/checkpatch.pl on arch/arm/mach-omap2/board-sdp-hsmmc.c
>
> - Use if (power_on) instead of if (power_on == 1).
>
> - Use if (ret) instead of if (ret != 0).
>
> - Add an extra-line to separate labels.
Pushing.
Tony
> Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@xxxxxxxxxxx>
> Acked-by: Anderson Lizardo <anderson.lizardo@xxxxxxxxxxx>
> Acked-by: Eduardo Valentin <eduardo.valentin@xxxxxxxxxxx>
> ---
> arch/arm/mach-omap2/board-sdp-hsmmc.c | 41 ++++++++++++++++-----------------
> 1 files changed, 20 insertions(+), 21 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/board-sdp-hsmmc.c b/arch/arm/mach-omap2/board-sdp-hsmmc.c
> index 3ae5b20..355c1c0 100644
> --- a/arch/arm/mach-omap2/board-sdp-hsmmc.c
> +++ b/arch/arm/mach-omap2/board-sdp-hsmmc.c
> @@ -9,6 +9,7 @@
> * published by the Free Software Foundation.
> */
> #include <linux/err.h>
> +#include <linux/io.h>
> #include <linux/module.h>
> #include <linux/platform_device.h>
> #include <linux/interrupt.h>
> @@ -17,7 +18,6 @@
> #include <asm/hardware.h>
> #include <asm/arch/mmc.h>
> #include <asm/arch/board.h>
> -#include <asm/io.h>
>
> #if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
>
> @@ -31,7 +31,7 @@
> #define TWL_GPIO_ISR1A 0x19
> #define LDO_CLR 0x00
> #define VSEL_S2_CLR 0x40
> -#define GPIO_0_BIT_POS 1 << 0
> +#define GPIO_0_BIT_POS (1 << 0)
> #define MMC1_CD_IRQ 0
> #define MMC2_CD_IRQ 1
>
> @@ -51,27 +51,27 @@ static int sdp_mmc_late_init(struct device *dev)
> * Configure TWL4030 GPIO parameters for MMC hotplug irq
> */
> ret = twl4030_request_gpio(MMC1_CD_IRQ);
> - if (ret != 0)
> + if (ret)
> goto err;
>
> ret = twl4030_set_gpio_edge_ctrl(MMC1_CD_IRQ,
> TWL4030_GPIO_EDGE_RISING | TWL4030_GPIO_EDGE_FALLING);
> - if (ret != 0)
> + if (ret)
> goto err;
>
> ret = twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0x02,
> TWL_GPIO_PUPDCTR1);
> - if (ret != 0)
> + if (ret)
> goto err;
>
> ret = twl4030_set_gpio_debounce(MMC1_CD_IRQ, TWL4030_GPIO_IS_ENABLE);
> - if (ret != 0)
> + if (ret)
> goto err;
>
> return ret;
> +
> err:
> dev_err(dev, "Failed to configure TWL4030 GPIO IRQ\n");
> -
> return ret;
> }
>
> @@ -80,7 +80,7 @@ static void sdp_mmc_cleanup(struct device *dev)
> int ret = 0;
>
> ret = twl4030_free_gpio(MMC1_CD_IRQ);
> - if (ret != 0)
> + if (ret)
> dev_err(dev, "Failed to configure TWL4030 GPIO IRQ\n");
> }
>
> @@ -96,24 +96,25 @@ static int mask_cd_interrupt(int mask)
> u8 reg = 0, ret = 0;
>
> ret = twl4030_i2c_read_u8(TWL4030_MODULE_GPIO, ®, TWL_GPIO_IMR1A);
> - if (ret != 0)
> + if (ret)
> goto err;
>
> reg = (mask == 1) ? (reg | GPIO_0_BIT_POS) : (reg & ~GPIO_0_BIT_POS);
>
> ret = twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, reg, TWL_GPIO_IMR1A);
> - if (ret != 0)
> + if (ret)
> goto err;
>
> ret = twl4030_i2c_read_u8(TWL4030_MODULE_GPIO, ®, TWL_GPIO_ISR1A);
> - if (ret != 0)
> + if (ret)
> goto err;
>
> reg = (mask == 1) ? (reg | GPIO_0_BIT_POS) : (reg & ~GPIO_0_BIT_POS);
>
> ret = twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, reg, TWL_GPIO_ISR1A);
> - if (ret != 0)
> + if (ret)
> goto err;
> +
> err:
> return ret;
> }
> @@ -155,7 +156,7 @@ static int sdp_mmc_set_power(struct device *dev, int slot, int power_on,
> #define OMAP2_CONTROL_PBIAS 0x48002520
> #endif
>
> - if (power_on == 1) {
> + if (power_on) {
> if (cpu_is_omap24xx())
> devconf = omap_readl(0x490022E8);
> else
> @@ -186,12 +187,12 @@ static int sdp_mmc_set_power(struct device *dev, int slot, int power_on,
>
> ret = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
> P1_DEV_GRP, VMMC1_DEV_GRP);
> - if (ret != 0)
> + if (ret)
> goto err;
>
> ret = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
> vdd_sel, VMMC1_DEDICATED);
> - if (ret != 0)
> + if (ret)
> goto err;
>
> msleep(100);
> @@ -202,7 +203,7 @@ static int sdp_mmc_set_power(struct device *dev, int slot, int power_on,
>
> return ret;
>
> - } else if (power_on == 0) {
> + } else {
> /* Power OFF */
>
> /* For MMC1, Toggle PBIAS before every power up sequence */
> @@ -210,24 +211,22 @@ static int sdp_mmc_set_power(struct device *dev, int slot, int power_on,
> OMAP2_CONTROL_PBIAS);
> ret = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
> LDO_CLR, VMMC1_DEV_GRP);
> - if (ret != 0)
> + if (ret)
> goto err;
>
> ret = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
> VSEL_S2_CLR, VMMC1_DEDICATED);
> - if (ret != 0)
> + if (ret)
> goto err;
>
> /* 100ms delay required for PBIAS configuration */
> msleep(100);
> omap_writel(omap_readl(OMAP2_CONTROL_PBIAS) | 0x7,
> OMAP2_CONTROL_PBIAS);
> - } else {
> - ret = -1;
> - goto err;
> }
>
> return 0;
> +
> err:
> return 1;
> }
> -- 1.5.3.GIT
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
