arch/arm/mach-omap2/pm.c: In function 'pm_init_serial_console':
arch/arm/mach-omap2/pm.c:188: error: expected ';' before 'break'
arch/arm/mach-omap2/pm.c:191: error: expected ';' before 'break'
arch/arm/mach-omap2/pm.c:193: error: 'PM_WKEN2' undeclared (first use in this function)
arch/arm/mach-omap2/pm.c:193: error: (Each undeclared identifier is reported only once
arch/arm/mach-omap2/pm.c:193: error: for each function it appears in.)
arch/arm/mach-omap2/pm.c:194: error: expected ';' before 'break'
... wasn't there a patch for this? That's with current GIT.
The "no semicolons after function calls" fix is obvious (and
is also a "that patch was never build-tested), but WKEN2 is
not quite clear (but see my guess below).
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -184,13 +184,13 @@ static void pm_init_serial_console(void)
}
switch (serial_console_uart) {
case 1:
- prm_set_mod_reg_bits(OMAP24XX_ST_UART1, CORE_MOD, PM_WKEN1)
+ prm_set_mod_reg_bits(OMAP24XX_ST_UART1, CORE_MOD, PM_WKEN1);
break;
case 2:
- prm_set_mod_reg_bits(OMAP24XX_ST_UART2, CORE_MOD, PM_WKEN1)
+ prm_set_mod_reg_bits(OMAP24XX_ST_UART2, CORE_MOD, PM_WKEN1);
break;
case 3:
- prm_set_mod_reg_bits(OMAP24XX_ST_UART3, CORE_MOD, PM_WKEN2)
+ prm_set_mod_reg_bits(OMAP24XX_ST_UART3, CORE_MOD, OMAP24XX_PM_WKEN2);
break;
}
}
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
