On Mon, Apr 07, 2008 at 02:55:16PM +0300, Felipe Balbi wrote: > From: Mikko Ylinen <mikko.k.ylinen@xxxxxxxxx> There was a missing space which was causing some troubles. Updated below: >From 163455c541b37fb38a0ea112796591c95c4ef3aa Mon Sep 17 00:00:00 2001 From: Mikko Ylinen <mikko.k.ylinen@xxxxxxxxx> Date: Wed, 2 Apr 2008 20:55:31 +0300 Subject: [PATCH 2/2] I2C: TWL4030: Kconfig and Makefile changes Put madc driver into kbuild. Signed-off-by: Mikko Ylinen <mikko.k.ylinen@xxxxxxxxx> Updated help text on Kconfig for TWL4030 MADC driver. Signed-off-by: Felipe Balbi <felipe.balbi@xxxxxxxxx> --- drivers/i2c/chips/Kconfig | 21 +++++++++++++++++++++ drivers/i2c/chips/Makefile | 1 + 2 files changed, 22 insertions(+), 0 deletions(-) diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig index bfab098..86869e2 100644 --- a/drivers/i2c/chips/Kconfig +++ b/drivers/i2c/chips/Kconfig @@ -128,6 +128,27 @@ config TWL4030_GPIO bool "TWL4030 GPIO Driver" depends on TWL4030_CORE +config TWL4030_MADC + tristate "TWL4030 MADC Driver" + depends on TWL4030_CORE + help + The TWL4030 Monitoring ADC driver enables the host + processor to monitor analog signals using analog-to-digital + conversions on the input source. TWL4030 MADC provides the + following features: + - Single 10-bit ADC with successive approximation register (SAR) conversion; + - Analog multiplexer for 16 inputs; + - Seven (of the 16) inputs are freely available; + - Battery voltage monitoring; + - Concurrent conversion request management; + - Interrupt signal to Primary Interrupt Handler; + - Averaging feature; + - Selective enable/disable of the averaging feature. + + Say 'y' here to statically link this module into the kernel or 'm' + to build it as a dinamically loadable module. The module will be + called twl4030-madc.ko + config TWL4030_USB bool "TWL4030 USB Transceiver Driver" depends on TWL4030_CORE diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile index 255fbb1..6431675 100644 --- a/drivers/i2c/chips/Makefile +++ b/drivers/i2c/chips/Makefile @@ -26,6 +26,7 @@ obj-$(CONFIG_TWL4030_CORE) += twl4030-core.o obj-$(CONFIG_TWL4030_GPIO) += twl4030-gpio.o obj-$(CONFIG_TWL4030_USB) += twl4030-usb.o obj-$(CONFIG_TWL4030_POWEROFF) += twl4030-poweroff.o +obj-$(CONFIG_TWL4030_MADC) += twl4030-madc.o obj-$(CONFIG_RTC_X1205_I2C) += x1205.o ifeq ($(CONFIG_I2C_DEBUG_CHIP),y) -- 1.5.5.rc3 -- - Balbi -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
