Re: [Resending PATCH 2/2] ARM: OMAP2: RTC board specific code: rebased

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



* Girish <girishsg@xxxxxx> [080312 12:48]:
> This patch adds rtc-twl4030 board specific code for 3430.

Can you please refresh one more time? This patch does not apply
right now.

Tony

> Signed-off-by: Girish S G <girishsg@xxxxxx>
> ---
>  arch/arm/configs/omap_3430sdp_defconfig |   16 +++++++-
>  arch/arm/mach-omap2/board-3430sdp.c     |   61 ++++++++++++++++++++++++++++++++
>  2 files changed, 76 insertions(+), 1 deletion(-)
> 
> Index: linux-omap-git-20080128/arch/arm/configs/omap_3430sdp_defconfig
> ===================================================================
> --- linux-omap-git-20080128.orig/arch/arm/configs/omap_3430sdp_defconfig	2008-01-26 04:27:28.000000000 +0530
> +++ linux-omap-git-20080128/arch/arm/configs/omap_3430sdp_defconfig	2008-03-12 15:06:14.034349437 +0530
> @@ -697,8 +697,22 @@
>  # MMC/SD Host Controller Drivers
>  #
>  CONFIG_MMC_OMAP_HS=y
> +
> +#
> +# RTC interface
> +#
>  CONFIG_RTC_LIB=y
> -# CONFIG_RTC_CLASS is not set
> +CONFIG_RTC_CLASS=y
> +CONFIG_RTC_HCTOSYS=y
> +CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
> +CONFIG_RTC_INTF_SYSFS=y
> +CONFIG_RTC_INTF_PROC=y
> +CONFIG_RTC_INTF_DEV=y
> +
> +#
> +# I2C RTC driver
> +#
> +CONFIG_RTC_DRV_TWL4030=y
>  
>  #
>  # DMA Engine support
> Index: linux-omap-git-20080128/arch/arm/mach-omap2/board-3430sdp.c
> ===================================================================
> --- linux-omap-git-20080128.orig/arch/arm/mach-omap2/board-3430sdp.c	2008-01-26 04:27:28.000000000 +0530
> +++ linux-omap-git-20080128/arch/arm/mach-omap2/board-3430sdp.c	2008-03-12 14:50:03.504899960 +0530
> @@ -37,9 +37,11 @@
>  #include <asm/arch/keypad.h>
>  #include <asm/arch/dma.h>
>  #include <asm/arch/gpmc.h>
> +#include <asm/arch/twl4030-rtc.h>
>  
>  #include <asm/io.h>
>  #include <asm/delay.h>
> +#include <asm/arch/control.h>
>  
>  #define	SDP3430_SMC91X_CS	3
>  
> @@ -47,6 +49,8 @@
>  #define ENABLE_VAUX3_DEV_GRP	0x20
>  
>  
> +#define TWL4030_MSECURE_GPIO	22
> +
>  static struct resource sdp3430_smc91x_resources[] = {
>  	[0] = {
>  		.start	= OMAP34XX_ETHR_START,
> @@ -117,6 +121,60 @@
>  	},
>  };
>  
> +#ifdef CONFIG_RTC_DRV_TWL4030
> +static int twl4030_rtc_init(void)
> +{
> +	int ret = 0;
> +
> +	/* 3430ES2.0 doesn't have msecure/gpio-22 line connected to T2 */
> +	if (is_device_type_gp() && is_sil_rev_less_than(OMAP3430_REV_ES2_0)) {
> +		u32 msecure_pad_config_reg = omap_ctrl_base_get() + 0xA3C;
> +		int mux_mask = 0x04;
> +		u16 tmp;
> +
> +		ret = omap_request_gpio(TWL4030_MSECURE_GPIO);
> +		if (ret < 0) {
> +			printk(KERN_ERR "twl4030_rtc_init: can't"
> +				"reserve GPIO:%d !\n", TWL4030_MSECURE_GPIO);
> +			goto out;
> +		}
> +		/*
> +		 * TWL4030 will be in secure mode if msecure line from OMAP
> +		 * is low. Make msecure line high in order to change the
> +		 * TWL4030 RTC time and calender registers.
> +		 */
> +		omap_set_gpio_direction(TWL4030_MSECURE_GPIO, 0);
> +
> +		tmp = omap_readw(msecure_pad_config_reg);
> +		tmp &= 0xF8;	/* To enable mux mode 03/04 = GPIO_RTC */
> +		tmp |= mux_mask;/* To enable mux mode 03/04 = GPIO_RTC */
> +		omap_writew(tmp, msecure_pad_config_reg);
> +
> +		omap_set_gpio_dataout(TWL4030_MSECURE_GPIO, 1);
> +	}
> +out:
> +	return ret;
> +}
> +
> +static void twl4030_rtc_exit(void)
> +{
> +	omap_free_gpio(TWL4030_MSECURE_GPIO);
> +}
> +
> +static struct twl4030rtc_platform_data sdp3430_twl4030rtc_data = {
> +	.init = &twl4030_rtc_init,
> +	.exit = &twl4030_rtc_exit,
> +};
> +
> +static struct platform_device sdp3430_twl4030rtc_device = {
> +	.name		= "twl4030_rtc",
> +	.id		= -1,
> +	.dev		= {
> +		.platform_data	= &sdp3430_twl4030rtc_data,
> +	},
> +};
> +#endif
> +
>  /**
>   * @brief ads7846_dev_init : Requests & sets GPIO line for pen-irq
>   *
> @@ -207,6 +265,9 @@
>  	&sdp3430_smc91x_device,
>  	&sdp3430_kp_device,
>  	&sdp3430_lcd_device,
> +#ifdef CONFIG_RTC_DRV_TWL4030
> +	&sdp3430_twl4030rtc_device,
> +#endif
>  };
>  
>  static inline void __init sdp3430_init_smc91x(void)
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux