Hi, I'm not familiar with 5912OSK. How do you flash the JFFS2 image into the memory? Maybe the flashing application and linux driver use different ECC scheme. - Juha On Wed, Feb 27, 2008 at 6:40 PM, Luís Vitório Cargnini <lvcargnini@xxxxxxxxx> wrote: > was with mkfs.jffs2 from mtd-utils . > I'm not sure if my mkfs.jffs2 is linked with my ARM kernel. > my plataform is an OMAP 5912 OSK > > > On Wed, Feb 27, 2008 at 8:11 PM, Juha Kuikka <juha.kuikka@xxxxxxxxx> wrote: > > > > Hi, > > > > > > > > On Wed, Feb 27, 2008 at 1:00 PM, Luís Vitório Cargnini > > <lvcargnini@xxxxxxxxx> wrote: > > > Dear fellows I have the following problem with my JFFS2 images: > > > > Could be any reason, from bad flash timings to wrong ECC layout. How > > did you create and flash these images? > > Were they flashed with mtd-utils or external tool? If with mtd-utils > > was it using the same kernel? > > > > Which platform is this on? > > > > - Juha > > > > -- > > Madness takes it's toll. Please have exact change. > > > > > > > > -- > ------------------------------------------------------------------------------ > Thanks && Regards > M.Sc. B.Sc. Luís Vitório Cargnini > IEEE Member > Electrical Engineer Faculty @ PUCRS > Ipiranga Avenue, 6681 – Building 30 > P.O. Box: 90619-900 – Porto Alegre/RS > Phone: +55 51 3320 3500 extension: 7696 > --------------------------------------------------------------------------------- > -- Madness takes it's toll. Please have exact change. -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
