Re: [PATCH] nilfs2: fix NULL pointer dereference in nilfs_segctor_prepare_write()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Liu Shixin,

I'm sorry for my repeated emails.

On Wed, Nov 9, 2022 at 12:13 AM Ryusuke Konishi wrote:
> >
> > I think the most likely cause is metadata corruption.  If so, we
> > should fix it by adding a proper sanity check, yes.
> > However, there is still the possibility that the error retry logic
> > after detecting errors has a flaw. (I believe at least this is not a
> > problem with normal paths.)
> > The sufile state inconsistency above is hypothetical for now.
> > Either way, I'd like to make sure what's actually happening (and where
> > the anomaly is coming from) so we can decide how to fix it.
>
> I noticed that this syzbot report has a disk image "mount_0.gz", so I
> tried to mount it read-only.
> The result was as follows:
>
> $ sudo mount -t nilfs2 -r ./mount_0 /mnt/test
> $ lssu
>               SEGNUM        DATE     TIME STAT     NBLOCKS
>                    0  26760730-10-29 19:40:00  -de   527958016
>                    1  26760730-11-01 20:29:04  -de   527958016
>                    2  1176433641-11-01 02:01:52  -de  2983038235
>                    3  -1158249729-11-01 04:57:19  a--       25375
>                    4  1970-01-02 21:24:32  a--           0
>                    5  -1415215929-01-02 00:19:15  --e  1631451365
>                    6  841067190-01-02 13:02:59  -d-  3101461260
>                    7  1495233207-01-02 01:31:11  -de  1697748441
>                    8  1875753393-01-02 21:54:14  -de   337757600
>                    9  648878284-01-02 21:06:08  ---  2133388152
>                   10  2122778986-01-02 17:49:43  --e   874605800
>                   11  55846197-01-02 09:50:53  -de  4262365368
>                   12  1872396026-01-02 06:45:18  ---  1051768258
>                   13  820920473-01-02 19:28:35  --e  2932336675
>                   14  2128306755-01-02 10:17:45  ---  3568501216
>                   15  1457063063-01-02 01:24:17  --e  2330511560
>                   16  586864775-01-02 16:08:15  ---   355283425
>                   17  -824870041-01-02 22:47:26  -d-  4177999057
>                   18  1562176264-01-02 08:06:45  ---  1312597355
>                   19  -392925420-01-02 17:08:27  -d-  3811075948
>                   20  1927575458-01-02 21:26:51  -de  1384562525
>                   21  2139923505-01-02 08:16:04  -d-    41861305
>
> Here,  we can see that neither segment #3 (= ns_segnum) nor #4 (=
> ns_nextnum) has the dirty flag
> ("d" in STAT).   So, as expected, this seems to be the root cause of
> the duplicate assignments and oops.
> The proper correction would be, therefore, to check and reject (or
> fix) this anomaly while outputting an error message
> (or warning if fix it at the same time).

> It should be inserted in mount time logic because the segments that
> nilfs2 itself allocates are always marked dirty with
> nilfs_sufile_alloc().

I will change my opinion.

Considering the possibility of sufile corruption at runtime, it seems
that the sanity check should be done on every nilfs_sufile_alloc()
call.

I now think nilfs_sufile_alloc() should call nilfs_error() and return
-EIO if the number of a newly found vacant segment matches
nilfs->ns_segnum or nilfs->ns_nextnum.

This test should not need to be done for every segbuf's sb_segnum
because metadata blocks that contain the information about allocated
segments are kept in memory because of its dirty state and will not be
destroyed until they are finally written out.

One correction then.  Just checking the output of the lssu command
wasn't enough because the following test is done on all flags except
the active flag "a".  (this flag is not persistent and visible only
when seeing via ioctl.)

>                         if (!nilfs_segment_usage_clean(su))
>                                 continue;
>                         /* found a clean segment */

We also had to see the invisible flags as well to confirm if that is
the root cause, but lssu doens't show them all.  So I checked the dump
data of the mount_0 file.
As a result, the segment at ns_segnum was not clean, but that of
ns_nextnum was clean, which means it's the root cause as expected.

Regards,
Ryusuke Konishi



[Index of Archives]     [Linux Filesystem Development]     [Linux BTRFS]     [Linux CIFS]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux SCSI]

  Powered by Linux