> On Jan 23, 2023, at 11:31 AM, Andrew Klaassen <andrew.klaassen@xxxxxxxxxxxxxx> wrote: > > Hello, > > There's a specific NFSv4 mount on a specific machine which we'd like to timeout and return an error after a few seconds if the server goes away. > > I've confirmed the following on two different kernels, 4.18.0-348.12.2.el8_5.x86_64 and 6.1.7-200.fc37.x86_64. > > I've been able to get both autofs and the mount command to cooperate, so that the mount attempt fails after an arbitrary number of seconds. This mount command, for example, will fail after 6 seconds, as expected based on the timeo=20,retrans=2,retry=0 options: > > $ time sudo mount -t nfs4 -o rw,relatime,sync,vers=4.2,rsize=131072,wsize=131072,namlen=255,acregmin=0,acregmax=0,acdirmin=0,acdirmax=0,soft,noac,proto=tcp,timeo=20,retrans=2,retry=0,sec=sys thor04:/mnt/thorfs04 /mnt/thor04 > mount.nfs4: Connection timed out > > real 0m6.084s > user 0m0.007s > sys 0m0.015s > > However, if the share is already mounted and the server goes away, the timeout is always 2 minutes plus the time I expect based on timeo and retrans. In this case, 2 minutes and 6 seconds: > > $ time ls /mnt/thor04 > ls: cannot access '/mnt/thor04': Connection timed out > > real 2m6.025s > user 0m0.003s > sys 0m0.000s > > Watching the outgoing packets in the second case, the pattern is always the same: > - 0.2 seconds between the first two, then doubling each time until the two minute mark is exceeded (so the last NFS packet, which is always the 11th packet, is sent around 1:45 after the first). > - Then some generic packets that start exactly-ish on the two minute mark, 1 second between the first two, then doubling each time. (By this time the NFS command has given up.) > > 11:10:21.898305 IP 10.30.13.2.916 > 10.31.3.13.2049: Flags [P.], seq 14452:14652, ack 18561, win 501, options [nop,nop,TS val 834889483 ecr 1589769203], length 200: NFS request xid 3614904256 196 getattr fh 0,2/53 > 11:10:22.105189 IP 10.30.13.2.916 > 10.31.3.13.2049: Flags [P.], seq 14452:14652, ack 18561, win 501, options [nop,nop,TS val 834889690 ecr 1589769203], length 200: NFS request xid 3614904256 196 getattr fh 0,2/53 > 11:10:22.313290 IP 10.30.13.2.916 > 10.31.3.13.2049: Flags [P.], seq 14452:14652, ack 18561, win 501, options [nop,nop,TS val 834889898 ecr 1589769203], length 200: NFS request xid 3614904256 196 getattr fh 0,2/53 > 11:10:22.721269 IP 10.30.13.2.916 > 10.31.3.13.2049: Flags [P.], seq 14452:14652, ack 18561, win 501, options [nop,nop,TS val 834890306 ecr 1589769203], length 200: NFS request xid 3614904256 196 getattr fh 0,2/53 > 11:10:23.569192 IP 10.30.13.2.916 > 10.31.3.13.2049: Flags [P.], seq 14452:14652, ack 18561, win 501, options [nop,nop,TS val 834891154 ecr 1589769203], length 200: NFS request xid 3614904256 196 getattr fh 0,2/53 > 11:10:25.233212 IP 10.30.13.2.916 > 10.31.3.13.2049: Flags [P.], seq 14452:14652, ack 18561, win 501, options [nop,nop,TS val 834892818 ecr 1589769203], length 200: NFS request xid 3614904256 196 getattr fh 0,2/53 > 11:10:28.497282 IP 10.30.13.2.916 > 10.31.3.13.2049: Flags [P.], seq 14452:14652, ack 18561, win 501, options [nop,nop,TS val 834896082 ecr 1589769203], length 200: NFS request xid 3614904256 196 getattr fh 0,2/53 > 11:10:35.025219 IP 10.30.13.2.916 > 10.31.3.13.2049: Flags [P.], seq 14452:14652, ack 18561, win 501, options [nop,nop,TS val 834902610 ecr 1589769203], length 200: NFS request xid 3614904256 196 getattr fh 0,2/53 > 11:10:48.337201 IP 10.30.13.2.916 > 10.31.3.13.2049: Flags [P.], seq 14452:14652, ack 18561, win 501, options [nop,nop,TS val 834915922 ecr 1589769203], length 200: NFS request xid 3614904256 196 getattr fh 0,2/53 > 11:11:14.449303 IP 10.30.13.2.916 > 10.31.3.13.2049: Flags [P.], seq 14452:14652, ack 18561, win 501, options [nop,nop,TS val 834942034 ecr 1589769203], length 200: NFS request xid 3614904256 196 getattr fh 0,2/53 > 11:12:08.721251 IP 10.30.13.2.916 > 10.31.3.13.2049: Flags [P.], seq 14452:14652, ack 18561, win 501, options [nop,nop,TS val 834996306 ecr 1589769203], length 200: NFS request xid 3614904256 196 getattr fh 0,2/53 > 11:12:22.545394 IP 10.30.13.2.942 > 10.31.3.13.2049: Flags [S], seq 1375256951, win 64240, options [mss 1460,sackOK,TS val 835010130 ecr 0,nop,wscale 7], length 0 > 11:12:23.570199 IP 10.30.13.2.942 > 10.31.3.13.2049: Flags [S], seq 1375256951, win 64240, options [mss 1460,sackOK,TS val 835011155 ecr 0,nop,wscale 7], length 0 > 11:12:25.617284 IP 10.30.13.2.942 > 10.31.3.13.2049: Flags [S], seq 1375256951, win 64240, options [mss 1460,sackOK,TS val 835013202 ecr 0,nop,wscale 7], length 0 > 11:12:29.649219 IP 10.30.13.2.942 > 10.31.3.13.2049: Flags [S], seq 1375256951, win 64240, options [mss 1460,sackOK,TS val 835017234 ecr 0,nop,wscale 7], length 0 > 11:12:37.905274 IP 10.30.13.2.942 > 10.31.3.13.2049: Flags [S], seq 1375256951, win 64240, options [mss 1460,sackOK,TS val 835025490 ecr 0,nop,wscale 7], length 0 > 11:12:54.289212 IP 10.30.13.2.942 > 10.31.3.13.2049: Flags [S], seq 1375256951, win 64240, options [mss 1460,sackOK,TS val 835041874 ecr 0,nop,wscale 7], length 0 > 11:13:26.545304 IP 10.30.13.2.942 > 10.31.3.13.2049: Flags [S], seq 1375256951, win 64240, options [mss 1460,sackOK,TS val 835074130 ecr 0,nop,wscale 7], length 0 > > I tried changing tcp_retries2 as suggested in another thread from this list: > > # echo 3 > /proc/sys/net/ipv4/tcp_retries2 > > ...but it made no difference on either kernel. The 2 minute timeout also doesn't seem to match with what I'd calculate from the initial value of tcp_retries2, which should give a much higher timeout. > > The only clue I've been able to find is in the retry=n entry in the NFS manpage: > > " For TCP the default is 3 minutes, but system TCP connection timeouts will sometimes limit the timeout of each retransmission to around 2 minutes." > > What I'm not able to make sense of: > - The retry option says that it applies to mount operations, not read/write operations. However, in this case I'm seeing the 2 minute delay on read/write operations but *not* mount operations. > - A couple of hours of searching didn't lead me to any kernel settings that would result in a 2 minute timeout. > > Does anyone have any clues about a) what's happening and b) how to get our desired behaviour of being able to control both mount and read/write timeouts down to a few seconds? If the server is already mounted on that client at another mount point, then the client will share the transport amongst mounts of the same server. The first mount's options take precedent, and subsequent mounts re-use that mount's transport and the mount options that control it. -- Chuck Lever
