Re: [PATCH v9 3/5] NFS: Convert buffered read paths to use netfs when fscache is enabled

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Ben,

Thanks for testing these patches.  More below.

On Sat, Nov 12, 2022 at 7:47 AM Benjamin Maynard <benmaynard@xxxxxxxxxx> wrote:
>
> Hi all,
>
> I've been doing some more testing with these patches, I applied all of
> the patches (v10 from
> https://patchwork.kernel.org/project/linux-nfs/list/?series=691729)
> apart from Patch 6 (the RFC patch) to version 6.0.8 of the kernel.
>
> I have the following setup:
>
> Source NFS Server <-- Re-Export Server (with FS-Cache) <-- NFS Client.
>
> I have a 500Gb file on the Source NFS Server, which I am then copying
> to the NFS Client via the Re-Export Server.
>
> On the first copy, I see heavy writes to /var/cache/fscache on the
> re-export server, and once the file copy completes I see that
> /var/cache/fscache is approximately 500Gb in size. All good so far.
>
> I then deleted that file from the NFS Client, and dropped the caches
> just to be safe (echo 3 > /proc/sys/vm/drop_caches on the NFS Client).
>
> I then performed another copy of the 500Gb file on the NFS Client,
> again via the Re-Export Server. What I expected would happen is that I
> would see heavy reads from the /var/cache/fscache volume as the file
> should be served from FS-Cache.
>
> However what I actually saw was no reads whatsoever, FS-Cache seems to
> be ignored and the file is pulled from the Source NFS Filer again. I
> also see heavy writes to /var/cache/fscache, so it appears that
> FS-Cache is overwriting its existing cache, and never using it.
>
Due to use of "drop_caches" this is almost certainly the known issue #1
I mentioned in the opening post of this series:
https://lore.kernel.org/all/20221103161637.1725471-1-dwysocha@xxxxxxxxxx/

The above issue will be fixed with the following patch which has not
been merged yet:
https://www.mail-archive.com/linux-cachefs@xxxxxxxxxx/msg03043.html

Do you have time to do another test to verify that is the case?
If so, I can re-post that patch on top of the first 5 patches in this series,
as well as a second patch that allows NFS to use it.


> I only have 104Gb of memory on the Re-Export Server (with FS-Cache) so
> it is not possible that the file is being served from the page cache.
>
> We saw this behaviour before on an older set of the patches when our
> mount between the Re-Export Server and the Source NFS Filer was using
> the "sync" option, but we are now using the "async" option and the
> same is happening.
>
> Mount options:
>
> Source NFS Server <-- Re-Export Server (with FS-Cache):
>
> 10.0.0.49:/files /srv/nfs/files nfs
> rw,noatime,vers=3,rsize=1048576,wsize=1048576,namlen=255,acregmin=600,acregmax=600,acdirmin=600,acdirmax=600,hard,nocto,proto=tcp,nconnect=16,timeo=600,retrans=2,sec=sys,mountaddr=10.0.0.49,mountvers=3,mountport=37485,mountproto=tcp,fsc,local_lock=none,addr=10.0.0.49
>
> Re-Export Server (with FS-Cache) <-- NFS Client:
>
> 10.0.0.3:/files /mnt/nfs nfs
> rw,relatime,vers=3,rsize=1048576,wsize=1048576,namlen=255,hard,proto=tcp,timeo=600,retrans=2,sec=sys,mountaddr=10.0.0.3,mountvers=3,mountport=20048,mountproto=tcp,local_lock=none,addr=10.0.0.3
>
> It is also worth noting this behaviour is not unique to the re-export
> use case. I see FS-Cache not being used with the following setup:
>
> Source NFS Server <-- Client (with FS-Cache).
>
> Thanks,
> Ben
>
>
> Kind Regards
>
> Benjamin Maynard
>
> Customer Engineer
>
> benmaynard@xxxxxxxxxx
>
> Google, Inc.
>
>
>
>
> On Mon, 31 Oct 2022 at 22:22, Trond Myklebust <trondmy@xxxxxxxxxxxxxxx> wrote:
> >
> >
> >
> > > On Oct 30, 2022, at 19:25, David Wysochanski <dwysocha@xxxxxxxxxx> wrote:
> > >
> > > On Sat, Oct 29, 2022 at 12:46 PM David Wysochanski <dwysocha@xxxxxxxxxx> wrote:
> > >>
> > >> On Fri, Oct 28, 2022 at 12:59 PM Trond Myklebust <trondmy@xxxxxxxxxx> wrote:
> > >>>
> > >>> On Fri, 2022-10-28 at 07:50 -0400, David Wysochanski wrote:
> > >>>> On Thu, Oct 27, 2022 at 3:16 PM Trond Myklebust <trondmy@xxxxxxxxxx>
> > >>>> wrote:
> > >>>>>
> > >>>>> On Mon, 2022-10-17 at 06:52 -0400, Dave Wysochanski wrote:
> > >>>>>> Convert the NFS buffered read code paths to corresponding netfs
> > >>>>>> APIs,
> > >>>>>> but only when fscache is configured and enabled.
> > >>>>>>
> > >>>>>> The netfs API defines struct netfs_request_ops which must be
> > >>>>>> filled
> > >>>>>> in by the network filesystem.  For NFS, we only need to define 5
> > >>>>>> of
> > >>>>>> the functions, the main one being the issue_read() function.
> > >>>>>> The issue_read() function is called by the netfs layer when a
> > >>>>>> read
> > >>>>>> cannot be fulfilled locally, and must be sent to the server
> > >>>>>> (either
> > >>>>>> the cache is not active, or it is active but the data is not
> > >>>>>> available).
> > >>>>>> Once the read from the server is complete, netfs requires a call
> > >>>>>> to
> > >>>>>> netfs_subreq_terminated() which conveys either how many bytes
> > >>>>>> were
> > >>>>>> read
> > >>>>>> successfully, or an error.  Note that issue_read() is called with
> > >>>>>> a
> > >>>>>> structure, netfs_io_subrequest, which defines the IO requested,
> > >>>>>> and
> > >>>>>> contains a start and a length (both in bytes), and assumes the
> > >>>>>> underlying
> > >>>>>> netfs will return a either an error on the whole region, or the
> > >>>>>> number
> > >>>>>> of bytes successfully read.
> > >>>>>>
> > >>>>>> The NFS IO path is page based and the main APIs are the pgio APIs
> > >>>>>> defined
> > >>>>>> in pagelist.c.  For the pgio APIs, there is no way for the caller
> > >>>>>> to
> > >>>>>> know how many RPCs will be sent and how the pages will be broken
> > >>>>>> up
> > >>>>>> into underlying RPCs, each of which will have their own
> > >>>>>> completion
> > >>>>>> and
> > >>>>>> return code.  In contrast, netfs is subrequest based, a single
> > >>>>>> subrequest may contain multiple pages, and a single subrequest is
> > >>>>>> initiated with issue_read() and terminated with
> > >>>>>> netfs_subreq_terminated().
> > >>>>>> Thus, to utilze the netfs APIs, NFS needs some way to accommodate
> > >>>>>> the netfs API requirement on the single response to the whole
> > >>>>>> subrequest, while also minimizing disruptive changes to the NFS
> > >>>>>> pgio layer.
> > >>>>>>
> > >>>>>> The approach taken with this patch is to allocate a small
> > >>>>>> structure
> > >>>>>> for each nfs_netfs_issue_read() call, store the final error and
> > >>>>>> number
> > >>>>>> of bytes successfully transferred in the structure, and update
> > >>>>>> these
> > >>>>>> values
> > >>>>>> as each RPC completes.  The refcount on the structure is used as
> > >>>>>> a
> > >>>>>> marker
> > >>>>>> for the last RPC completion, is incremented in
> > >>>>>> nfs_netfs_read_initiate(),
> > >>>>>> and decremented inside nfs_netfs_read_completion(), when a
> > >>>>>> nfs_pgio_header
> > >>>>>> contains a valid pointer to the data.  On the final put (which
> > >>>>>> signals
> > >>>>>> the final outstanding RPC is complete) in
> > >>>>>> nfs_netfs_read_completion(),
> > >>>>>> call netfs_subreq_terminated() with either the final error value
> > >>>>>> (if
> > >>>>>> one or more READs complete with an error) or the number of bytes
> > >>>>>> successfully transferred (if all RPCs complete successfully).
> > >>>>>> Note
> > >>>>>> that when all RPCs complete successfully, the number of bytes
> > >>>>>> transferred
> > >>>>>> is capped to the length of the subrequest.  Capping the
> > >>>>>> transferred
> > >>>>>> length
> > >>>>>> to the subrequest length prevents "Subreq overread" warnings from
> > >>>>>> netfs.
> > >>>>>> This is due to the "aligned_len" in nfs_pageio_add_page(), and
> > >>>>>> the
> > >>>>>> corner case where NFS requests a full page at the end of the
> > >>>>>> file,
> > >>>>>> even when i_size reflects only a partial page (NFS overread).
> > >>>>>>
> > >>>>>> Signed-off-by: Dave Wysochanski <dwysocha@xxxxxxxxxx>
> > >>>>>> Reviewed-by: Jeff Layton <jlayton@xxxxxxxxxx>
> > >>>>>
> > >>>>>
> > >>>>> This is not doing what I asked for, which was to separate out the
> > >>>>> fscache functionality, so that we can call that if and when it is
> > >>>>> available.
> > >>>>>
> > >>>> I must have misunderstood then.
> > >>>>
> > >>>> The last feedback I have from you was that you wanted it to be
> > >>>> an opt-in feature, and it was a comment on a previous patch
> > >>>> to Kconfig.  I was proceeding the best I knew how, but
> > >>>> let me try to get back on track.
> > >>>>
> > >>>>> Instead, it is just wrapping the NFS requests inside netfs
> > >>>>> requests. As
> > >>>>> it stands, that means it is just duplicating information, and
> > >>>>> adding
> > >>>>> unnecessary overhead to the standard I/O path (extra allocations,
> > >>>>> extra
> > >>>>> indirect calls, and extra bloat to the inode).
> > >>>>>
> > >>>> I think I understand what you're saying but I'm not sure.  Let me
> > >>>> ask some clarifying questions.
> > >>>>
> > >>>> Are you objecting to the code when CONFIG_NFS_FSCACHE is
> > >>>> configured?  Or when it is not?  Or both?  I think you're objecting
> > >>>> when it's configured, but not enabled (we mount without 'fsc').
> > >>>> Am I right?
> > >>>>
> > >>>> Also, are you objecting to the design that to use fcache we now
> > >>>> have to use netfs, specifically:
> > >>>> - call into netfs via either netfs_read_folio or netfs_readahead
> > >>>> - if fscache is enabled, then the IO can be satisfied from fscache
> > >>>> - if fscache is not enabled, or some of the IO cannot be satisfied
> > >>>> from the cache, then NFS is called back via netfs_issue_read
> > >>>> and we use the normal NFS read pageio interface.  This requires
> > >>>> we call netfs_subreq_terminated() when all the RPCs complete,
> > >>>> which is the reason for the small changes to pagelist.c
> > >>>
> > >>> I'm objecting to any middle layer "solution" that adds overhead to the
> > >>> NFS I/O paths.
> > >>>
> > >> Got it.
> > >>
> > >>> I'm willing to consider solutions that are specific only to the fscache
> > >>> use case (i.e. when the 'fsc' mount option is specified). However when
> > >>> I perform a normal NFS mount, and do I/O, then I don't want to see
> > >>> extra memory allocations, extra indirect calls and larger inode
> > >>> footprints.
> > >>>
> > >>> IOW: I want the code to optimise for the case of standard NFS, not for
> > >>> the case of 'NFS with cachefs additions'.
> > >>>
> > >> I agree completely.  Are you seeing extra memory allocations
> > >> happen on mounts without 'fsc' or is it more a concern or how
> > >> some of the patches look?  We should not be calling any netfs or
> > >> fscache code if 'fsc' is not on the mount and I don't see any in my
> > >> testing. So either there's a misunderstanding here, or there's a
> > >> bug I'm missing.
> > >>
> > >> If fscache is not configured, then nfs_netfs_read_folio() and
> > >> nfs_netfs_readahead() is a wrapper that returns -ENOBUFS.
> > >> If it's configured but not enabled, then the checks for
> > >> netfs_inode(inode)->cache should skip over any netfs code.
> > >> But maybe there's a non-obvious bug you're seeing and
> > >> somehow netfs is still getting called?  Because I cannot
> > >> see netfs getting called if 'fsc' is not on the mount in my
> > >> tests.
> > >>
> > >> int nfs_netfs_read_folio(struct file *file, struct folio *folio)
> > >> {
> > >>       if (!netfs_inode(folio_inode(folio))->cache)
> > >>               return -ENOBUFS;
> > >>
> > >>       return netfs_read_folio(file, folio);
> > >> }
> > >>
> > >> int nfs_netfs_readahead(struct readahead_control *ractl)
> > >> {
> > >>       struct inode *inode = ractl->mapping->host;
> > >>
> > >>       if (!netfs_inode(inode)->cache)
> > >>               return -ENOBUFS;
> > >>
> > >>       netfs_readahead(ractl);
> > >>       return 0;
> > >> }
> > >>
> > >>
> > >>>>
> > >>>> Can you be more specific as to the portions of the patch you don't
> > >>>> like
> > >>>> so I can move it in the right direction?
> > >>>>
> > >>>> This is from patch #2 which you didn't comment on.  I'm not sure
> > >>>> you're
> > >>>> ok with it though, since you mention "extra bloat to the inode".
> > >>>> Do you object to this even though it's wrapped in an
> > >>>> #ifdef CONFIG_NFS_FSCACHE?  If so, do you require no
> > >>>> extra size be added to nfs_inode?
> > >>>>
> > >>>> @@ -204,9 +208,11 @@ struct nfs_inode {
> > >>>>       __u64 write_io;
> > >>>>       __u64 read_io;
> > >>>> #ifdef CONFIG_NFS_FSCACHE
> > >>>> -       struct fscache_cookie   *fscache;
> > >>>> -#endif
> > >>>> +       struct netfs_inode      netfs; /* netfs context and VFS inode
> > >>>> */
> > >>>> +#else
> > >>>>       struct inode            vfs_inode;
> > >>>> +#endif
> > >>>> +
> > >>>
> > >>> Ideally, I'd prefer no extra size. I can live with it up to a certain
> > >>> point, however for now NFS is not unconditionally opting into the netfs
> > >>> project. If we're to ever do that, then I want to see streamlined code
> > >>> for the standard I/O case.
> > >>>
> > >> Ok and understood about standard I/O case.
> > >>
> > >> I was thinking how we might not increase the size, but I don't think
> > >> I can make it work.
> > >>
> > >> I thought we could change to something like the below, without an
> > >> embedded struct inode:
> > >>
> > >> @@ -204,9 +208,11 @@ struct nfs_inode {
> > >>       __u64 write_io;
> > >>       __u64 read_io;
> > >> #ifdef CONFIG_NFS_FSCACHE
> > >> -       struct fscache_cookie   *fscache;
> > >> -#endif
> > >> +       struct netfs_inode      *netfs; /* netfs context and VFS inode */
> > >> +#else
> > >>       struct inode            vfs_inode;
> > >> +#endif
> > >> +
> > >>
> > >> Then I would need to alloc/free a netfs_inode at the time of
> > >> nfs_inode initiation.  Unfortunately this has the issue that the NFS_I()
> > >> macro cannot work, because it requires an embedded "struct inode"
> > >> due to "container_of" use:
> > >>
> > >> +#ifdef CONFIG_NFS_FSCACHE
> > >> +static inline struct inode *VFS_I(struct nfs_inode *nfsi)
> > >> +{
> > >> +       return &nfsi->netfs.inode;
> > >> +}
> > >> +static inline struct nfs_inode *NFS_I(const struct inode *inode)
> > >> +{
> > >> +       return container_of(inode, struct nfs_inode, netfs.inode);
> > >> +}
> > >> +#else
> > >> +static inline struct inode *VFS_I(struct nfs_inode *nfsi)
> > >> +{
> > >> +       return &nfsi->vfs_inode;
> > >> +}
> > >> static inline struct nfs_inode *NFS_I(const struct inode *inode)
> > >> {
> > >>       return container_of(inode, struct nfs_inode, vfs_inode);
> > >> }
> > >> +#endif
> > >>
> > >>
> > >
> > > Actually Trond maybe we can achieve a "0 length increase" of
> > > nfs_inode if dhowells would take a patch to modify the definition
> > > of struct netfs_inode and netfs_inode_init(), something like the WIP
> > > patch below.  What do you think?
> >
> > That works for me.
> >
> > >
> > > I think maybe this could be a follow-on patch and if you/dhowells
> > > think it's an ok idea I can try to work out what is needed across
> > > the tree.  I thought about it more and I kinda agree that in the
> > > case for NFS where fscache is "configured but not enabled",
> > > then even though we're only adding 24 bytes to the nfs_inode
> > > each time, it will add up so it is worth at least a discussion.
> > >
> > > diff --git a/include/linux/netfs.h b/include/linux/netfs.h
> > > index f2402ddeafbf..195714f1c355 100644
> > > --- a/include/linux/netfs.h
> > > +++ b/include/linux/netfs.h
> > > @@ -118,11 +118,7 @@ enum netfs_io_source {
> > > typedef void (*netfs_io_terminated_t)(void *priv, ssize_t transferred_or_error,
> > >                                     bool was_async);
> > >
> > > -/*
> > > - * Per-inode context.  This wraps the VFS inode.
> > > - */
> > > -struct netfs_inode {
> > > -       struct inode            inode;          /* The VFS inode */
> > > +struct netfs_info {
> > >       const struct netfs_request_ops *ops;
> > > #if IS_ENABLED(CONFIG_FSCACHE)
> > >       struct fscache_cookie   *cache;
> > > @@ -130,6 +126,14 @@ struct netfs_inode {
> > >       loff_t                  remote_i_size;  /* Size of the remote file */
> > > };
> > >
> > > +/*
> > > + * Per-inode context.  This wraps the VFS inode.
> > > + */
> > > +struct netfs_inode {
> > > +       struct inode            inode;          /* The VFS inode */
> > > +       struct netfs_info       *netfs;         /* Rest of netfs data */
> > > +};
> > > +
> > > /*
> > > * Resources required to do operations on a cache.
> > > */
> > > @@ -312,10 +316,12 @@ static inline struct netfs_inode
> > > *netfs_inode(struct inode *inode)
> > > static inline void netfs_inode_init(struct netfs_inode *ctx,
> > >                                   const struct netfs_request_ops *ops)
> > > {
> > > -       ctx->ops = ops;
> > > -       ctx->remote_i_size = i_size_read(&ctx->inode);
> > > +       ctx->netfs = kzalloc(sizeof(struct netfs_info)), GFP_KERNEL);
> > > +       /* FIXME: Check for NULL */
> > > +       ctx->netfs->ops = ops;
> > > +       ctx->netfs->remote_i_size = i_size_read(&ctx->inode);
> > > #if IS_ENABLED(CONFIG_FSCACHE)
> > > -       ctx->cache = NULL;
> > > +       ctx->netfs->cache = NULL;
> > > #endif
> > > }
> > >
> > >
> > >
> > >>
> > >>>>
> > >>>>
> > >>>> Are you ok with the stub functions which are placed in fscache.h, and
> > >>>> when CONFIG_NFS_FSCACHE is not set, become either a no-op
> > >>>> or a 1-liner (nfs_netfs_readpage_release)?
> > >>>>
> > >>>> #else /* CONFIG_NFS_FSCACHE */
> > >>>> +static inline void nfs_netfs_inode_init(struct nfs_inode *nfsi) {}
> > >>>> +static inline void nfs_netfs_initiate_read(struct nfs_pgio_header
> > >>>> *hdr) {}
> > >>>> +static inline void nfs_netfs_read_completion(struct nfs_pgio_header
> > >>>> *hdr) {}
> > >>>> +static inline void nfs_netfs_readpage_release(struct nfs_page *req)
> > >>>> +{
> > >>>> +       unlock_page(req->wb_page);
> > >>>> +}
> > >>>> static inline void nfs_fscache_release_super_cookie(struct
> > >>>> super_block *sb) {}
> > >>>> static inline void nfs_fscache_init_inode(struct inode *inode) {}
> > >>>>
> > >>>>
> > >>>> Do you object to the below?  If so, then do you want
> > >>>> #ifdef CONFIG_NFS_FSCACHE here?
> > >>>>
> > >>>> -- a/fs/nfs/inode.c
> > >>>> +++ b/fs/nfs/inode.c
> > >>>> @@ -2249,6 +2249,8 @@ struct inode *nfs_alloc_inode(struct
> > >>>> super_block *sb)
> > >>>> #ifdef CONFIG_NFS_V4_2
> > >>>>       nfsi->xattr_cache = NULL;
> > >>>> #endif
> > >>>> +       nfs_netfs_inode_init(nfsi);
> > >>>> +
> > >>>>       return VFS_I(nfsi);
> > >>>> }
> > >>>> EXPORT_SYMBOL_GPL(nfs_alloc_i
> > >>>> node);
> > >>>>
> > >>>>
> > >>>> Do you object to the changes in fs/nfs/read.c?  Specifically,
> > >>>> how about the below calls to netfs from nfs_read_folio and
> > >>>> nfs_readahead into equivalent netfs calls?  So when
> > >>>> NFS_CONFIG_FSCACHE is set, but fscache is not enabled
> > >>>> ('fsc' not on mount), these netfs functions do immediately call
> > >>>> netfs_alloc_request().  But I wonder if we could simply add a
> > >>>> check to see if fscache is enabled on the mount, and skip
> > >>>> over to satisfy what you want.  Am I understanding what you
> > >>>> want?
> > >>>
> > >>> Quite frankly, I'd prefer that we just split out the functionality that
> > >>> is needed from the netfs code so that it can be optimised. However I'm
> > >>> not interested enough in the cachefs functionality to work on that
> > >>> myself. ...and as I indicated above, I might be OK with opting into the
> > >>> netfs project, once the overhead can be made to disappear.
> > >>>
> > >> Understood.
> > >>
> > >> If you think it makes more sense, I can move some of the nfs_netfs_*
> > >> functions into a netfs.c file as a starting point.  Or that can maybe
> > >> be done in a future patchset?
> > >>
> > >> For now I was equating netfs and fscache together so we can
> > >> move on from the much older and single-page limiting fscache
> > >> interface that is likely to go away soon.
> > >>
> > >>>>
> > >>>> @@ -355,6 +343,10 @@ int nfs_read_folio(struct file *file, struct
> > >>>> folio *folio)
> > >>>>       if (NFS_STALE(inode))
> > >>>>               goto out_unlock;
> > >>>>
> > >>>> +       ret = nfs_netfs_read_folio(file, folio);
> > >>>> +       if (!ret)
> > >>>> +               goto out;
> > >>>> +
> > >>>>
> > >>>> @@ -405,6 +399,10 @@ void nfs_readahead(struct readahead_control
> > >>>> *ractl)
> > >>>>       if (NFS_STALE(inode))
> > >>>>               goto out;
> > >>>>
> > >>>> +       ret = nfs_netfs_readahead(ractl);
> > >>>> +       if (!ret)
> > >>>> +               goto out;
> > >>>> +
> > >>>>
> > >> The above wrappers should prevent any additional overhead when fscache
> > >> is not enabled.  As far as I know these work to avoid calling netfs
> > >> when 'fsc' is not on the mount.
> > >>
> > >>>>
> > >>>> And how about these calls from different points in the read
> > >>>> path to the earlier mentioned stub functions?
> > >>>>
> > >>>> @@ -110,20 +110,13 @@ EXPORT_SYMBOL_GPL(nfs_pageio_reset_read_mds);
> > >>>>
> > >>>> static void nfs_readpage_release(struct nfs_page *req, int error)
> > >>>> {
> > >>>> -       struct inode *inode = d_inode(nfs_req_openctx(req)->dentry);
> > >>>>       struct page *page = req->wb_page;
> > >>>>
> > >>>> -       dprintk("NFS: read done (%s/%llu %d@%lld)\n", inode->i_sb-
> > >>>>> s_id,
> > >>>> -               (unsigned long long)NFS_FILEID(inode), req->wb_bytes,
> > >>>> -               (long long)req_offset(req));
> > >>>> -
> > >>>>       if (nfs_error_is_fatal_on_server(error) && error != -
> > >>>> ETIMEDOUT)
> > >>>>               SetPageError(page);
> > >>>> -       if (nfs_page_group_sync_on_bit(req, PG_UNLOCKPAGE)) {
> > >>>> -               if (PageUptodate(page))
> > >>>> -                       nfs_fscache_write_page(inode, page);
> > >>>> -               unlock_page(page);
> > >>>> -       }
> > >>>> +       if (nfs_page_group_sync_on_bit(req, PG_UNLOCKPAGE))
> > >>>> +               nfs_netfs_readpage_release(req);
> > >>>> +
> > >>>
> > >>> I'm not seeing the value of wrapping unlock_page(), no... That code is
> > >>> going to need to change when we move it to use folios natively anyway.
> > >>>
> > >> Ok, how about I make it conditional on whether fscache is configured
> > >> and enabled then, similar to the nfs_netfs_read_folio() and
> > >> nfs_netfs_readahead()?  Below is what that would look like.
> > >> I could inline the code in nfs_netfs_readpage_release() if you
> > >> think it would be clearer.
> > >>
> > >> static void nfs_readpage_release(struct nfs_page *req, int error)
> > >> {
> > >>       struct page *page = req->wb_page;
> > >>
> > >>       if (nfs_error_is_fatal_on_server(error) && error != -ETIMEDOUT)
> > >>               SetPageError(page);
> > >>       if (nfs_page_group_sync_on_bit(req, PG_UNLOCKPAGE))
> > >> #ifndef CONFIG_NFS_FSCACHE
> > >>               unlock_page(req->wb_page);
> > >> #else
> > >>               nfs_netfs_readpage_release(req);
> > >> #endif
> > >>       nfs_release_request(req);
> > >> }
> > >>
> > >>
> > >> void nfs_netfs_readpage_release(struct nfs_page *req)
> > >> {
> > >>   struct inode *inode = d_inode(nfs_req_openctx(req)->dentry);
> > >>
> > >>   /*
> > >>    * If fscache is enabled, netfs will unlock pages.
> > >>    */
> > >>   if (netfs_inode(inode)->cache)
> > >>       return;
> > >>
> > >>   unlock_page(req->wb_page);
> > >> }
> > >>
> > >>
> > >>>>       nfs_release_request(req);
> > >>>> }
> > >>>>
> > >>>> @@ -177,6 +170,8 @@ static void nfs_read_completion(struct
> > >>>> nfs_pgio_header *hdr)
> > >>>>               nfs_list_remove_request(req);
> > >>>>               nfs_readpage_release(req, error);
> > >>>>       }
> > >>>> +       nfs_netfs_read_completion(hdr);
> > >>>> +
> > >>>> out:
> > >>>>       hdr->release(hdr);
> > >>>> }
> > >>>> @@ -187,6 +182,7 @@ static void nfs_initiate_read(struct
> > >>>> nfs_pgio_header *hdr,
> > >>>>                             struct rpc_task_setup *task_setup_data,
> > >>>> int how)
> > >>>> {
> > >>>>       rpc_ops->read_setup(hdr, msg);
> > >>>> +       nfs_netfs_initiate_read(hdr);
> > >>>>       trace_nfs_initiate_read(hdr);
> > >>>> }
> > >>>>
> > >>>>
> > >>>> Are you ok with these additions?  Something like this would
> > >>>> be required in the case of fscache configured and enabled,
> > >>>> because we could have some of the data in a read in
> > >>>> fscache, and some not.  That is the reason for the netfs
> > >>>> design, and why we need to be able to call the normal
> > >>>> NFS read IO path (netfs calls into issue_read, and we call
> > >>>> back via netfs_subreq_terminated)?
> > >>>>
> > >>>> @@ -101,6 +101,9 @@ struct nfs_pageio_descriptor {
> > >>>>       struct pnfs_layout_segment *pg_lseg;
> > >>>>       struct nfs_io_completion *pg_io_completion;
> > >>>>       struct nfs_direct_req   *pg_dreq;
> > >>>> +#ifdef CONFIG_NFS_FSCACHE
> > >>>> +       void                    *pg_netfs;
> > >>>> +#endif
> > >>>>
> > >>>> @@ -1619,6 +1619,9 @@ struct nfs_pgio_header {
> > >>>>       const struct nfs_rw_ops *rw_ops;
> > >>>>       struct nfs_io_completion *io_completion;
> > >>>>       struct nfs_direct_req   *dreq;
> > >>>> +#ifdef CONFIG_NFS_FSCACHE
> > >>>> +       void                    *netfs;
> > >>>> +#endif
> > >>>>
> > >>>>
> > >>>> And these additions to pagelist.c?
> > >>>>
> > >>>> @@ -68,6 +69,10 @@ void nfs_pgheader_init(struct
> > >>>> nfs_pageio_descriptor *desc,
> > >>>>       hdr->good_bytes = mirror->pg_count;
> > >>>>       hdr->io_completion = desc->pg_io_completion;
> > >>>>       hdr->dreq = desc->pg_dreq;
> > >>>> +#ifdef CONFIG_NFS_FSCACHE
> > >>>> +       if (desc->pg_netfs)
> > >>>> +               hdr->netfs = desc->pg_netfs;
> > >>>> +#endif
> > >>>
> > >>> Why the conditional?
> > >>>
> > >> Not really needed and I was thinking of removing it, so I'll do that.
> > >>
> > >>>>
> > >>>>
> > >>>> @@ -846,6 +851,9 @@ void nfs_pageio_init(struct nfs_pageio_descriptor
> > >>>> *desc,
> > >>>>       desc->pg_lseg = NULL;
> > >>>>       desc->pg_io_completion = NULL;
> > >>>>       desc->pg_dreq = NULL;
> > >>>> +#ifdef CONFIG_NFS_FSCACHE
> > >>>> +       desc->pg_netfs = NULL;
> > >>>> +#endif
> > >>>>
> > >>>>
> > >>>> @@ -1360,6 +1369,9 @@ int nfs_pageio_resend(struct
> > >>>> nfs_pageio_descriptor *desc,
> > >>>>
> > >>>>       desc->pg_io_completion = hdr->io_completion;
> > >>>>       desc->pg_dreq = hdr->dreq;
> > >>>> +#ifdef CONFIG_NFS_FSCACHE
> > >>>> +       desc->pg_netfs = hdr->netfs;
> > >>>> +#endif
> > >>>
> > >>> Those all need wrapper functions instead of embedding #ifdefs.
> > >>>
> > >> Ok.
> > >>
> > >>
> > >>
> > >>>>
> > >>>>
> > >>>>> My expectation is that the standard I/O path should have minimal
> > >>>>> overhead, and should certainly not increase the overhead that we
> > >>>>> already have. Will this be addressed in future iterations of these
> > >>>>> patches?
> > >>>>>
> > >>>>
> > >>>> I will do what I can to satisfy what you want, either by fixing up
> > >>>> this patch or follow-on patches.  Hopefully the above questions
> > >>>> will clarify the next steps.
> > >>>>
> > >>>
> > >>> --
> > >>> Trond Myklebust
> > >>> Linux NFS client maintainer, Hammerspace
> > >>> trond.myklebust@xxxxxxxxxxxxxxx
> >
> >
> >
> > Trond Myklebust
> > CTO, Hammerspace Inc
> > 1900 S Norfolk St, Suite 350 - #45
> > San Mateo, CA 94403
> >
> > www.hammer.space
> >
> >
>





[Index of Archives]     [Linux Filesystem Development]     [Linux USB Development]     [Linux Media Development]     [Video for Linux]     [Linux NILFS]     [Linux Audio Users]     [Yosemite Info]     [Linux SCSI]

  Powered by Linux