[PATCH] statx, inode: document the new STATX_VERSION field

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I'm proposing to expose the inode change attribute via statx [1]. Document
what this value means and what an observer can infer from it changing.

Signed-off-by: Jeff Layton <jlayton@xxxxxxxxxx>

[1]: https://lore.kernel.org/linux-nfs/d9c065939af2728b1c0768d5ef7526995b634902.camel@xxxxxxxxxx/T/#t
---
 man2/statx.2 | 13 +++++++++++++
 man7/inode.7 | 31 +++++++++++++++++++++++++++++++
 2 files changed, 44 insertions(+)

Another RFC posting to hopefully nail down the desired semantics. I
purposefully left out verbiage around atomicity, with the expectation
that we should be able to make the existing filesystems that support
i_version bump the counter after a write instead of before.

Also, for v5:
- drop _INO/_ino from the name (it's redunant)
- add STATX_ATTR_VERSION_MONOTONIC

diff --git a/man2/statx.2 b/man2/statx.2
index 0d1b4591f74c..b2fdb5ddf97a 100644
--- a/man2/statx.2
+++ b/man2/statx.2
@@ -62,6 +62,7 @@ struct statx {
     __u32 stx_dev_major;   /* Major ID */
     __u32 stx_dev_minor;   /* Minor ID */
     __u64 stx_mnt_id;      /* Mount ID */
+    __u64 stx_version; /* Inode change attribute */
 };
 .EE
 .in
@@ -247,6 +248,7 @@ STATX_BTIME	Want stx_btime
 STATX_ALL	The same as STATX_BASIC_STATS | STATX_BTIME.
 	It is deprecated and should not be used.
 STATX_MNT_ID	Want stx_mnt_id (since Linux 5.8)
+STATX_VERSION	Want stx_version (DRAFT)
 .TE
 .in
 .PP
@@ -407,10 +409,16 @@ This is the same number reported by
 .BR name_to_handle_at (2)
 and corresponds to the number in the first field in one of the records in
 .IR /proc/self/mountinfo .
+.TP
+.I stx_version
+The inode version, also known as the inode change attribute. See
+.BR inode (7)
+for details.
 .PP
 For further information on the above fields, see
 .BR inode (7).
 .\"
+.TP
 .SS File attributes
 The
 .I stx_attributes
@@ -489,6 +497,11 @@ without an explicit
 See
 .BR mmap (2)
 for more information.
+.TP
+.BR STATX_ATTR_VERSION_MONOTONIC " (since Linux 6.?)"
+The stx_version value monotonically increases over time and will never appear
+to go backward, even in the event of a crash. This can allow an application to
+make a better determination about ordering when viewing different versions.
 .SH RETURN VALUE
 On success, zero is returned.
 On error, \-1 is returned, and
diff --git a/man7/inode.7 b/man7/inode.7
index 9b255a890720..ec7f80dacaa8 100644
--- a/man7/inode.7
+++ b/man7/inode.7
@@ -184,6 +184,12 @@ Last status change timestamp (ctime)
 This is the file's last status change timestamp.
 It is changed by writing or by setting inode information
 (i.e., owner, group, link count, mode, etc.).
+.TP
+Inode version (version)
+(not returned in the \fIstat\fP structure); \fIstatx.stx_version\fP
+.IP
+This is the inode change counter. See the discussion of
+\fBthe inode version counter\fP, below.
 .PP
 The timestamp fields report time measured with a zero point at the
 .IR Epoch ,
@@ -424,6 +430,31 @@ on a directory means that a file
 in that directory can be renamed or deleted only by the owner
 of the file, by the owner of the directory, and by a privileged
 process.
+.SS The inode version counter
+.PP
+The
+.I statx.stx_version
+field is the inode change counter. Any operation that would result in a
+change to \fIstatx.stx_ctime\fP must result in an increase to this value.
+The value must increase even in the case where the ctime change is not
+evident due to coarse timestamp granularity.
+.PP
+An observer cannot infer anything from amount of increase about the
+nature or magnitude of the change. If the returned value is different
+from the last time it was checked, then something has made an explicit
+data and/or metadata change to the inode.
+.PP
+In the event of a system crash this value can appear to go backward,
+if it were queried before being written to the backing store. If
+the value were then incremented again after restart, then an observer
+could miss noticing a change. Applications that persist stx_version values
+across a reboot should take care to mitigate this problem. If the filesystem
+reports \fISTATX_ATTR_VERSION_MONOTONIC\fP in stx_attributes, then it is not
+subject to this problem.
+.PP
+The stx_version is a Linux extension and is not supported by all filesystems.
+The application must verify that the \fISTATX_VERSION\fP bit is set in the
+returned \fIstatx.stx_mask\fP before relying on this field.
 .SH STANDARDS
 If you need to obtain the definition of the
 .I blkcnt_t
-- 
2.37.3




[Index of Archives]     [Linux Filesystem Development]     [Linux USB Development]     [Linux Media Development]     [Video for Linux]     [Linux NILFS]     [Linux Audio Users]     [Yosemite Info]     [Linux SCSI]

  Powered by Linux