Re: [PATCH v14] vfs: fix copy_file_range() regression in cross-fs copies

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Amir Goldstein <amir73il@xxxxxxxxx> writes:

> From: Luis Henriques <lhenriques@xxxxxxx>
>
> A regression has been reported by Nicolas Boichat, found while using the
> copy_file_range syscall to copy a tracefs file.  Before commit
> 5dae222a5ff0 ("vfs: allow copy_file_range to copy across devices") the
> kernel would return -EXDEV to userspace when trying to copy a file across
> different filesystems.  After this commit, the syscall doesn't fail anymore
> and instead returns zero (zero bytes copied), as this file's content is
> generated on-the-fly and thus reports a size of zero.
>
> Another regression has been reported by He Zhe - the assertion of
> WARN_ON_ONCE(ret == -EOPNOTSUPP) can be triggered from userspace when
> copying from a sysfs file whose read operation may return -EOPNOTSUPP.
>
> Since we do not have test coverage for copy_file_range() between any
> two types of filesystems, the best way to avoid these sort of issues
> in the future is for the kernel to be more picky about filesystems that
> are allowed to do copy_file_range().
>
> This patch restores some cross-filesystem copy restrictions that existed
> prior to commit 5dae222a5ff0 ("vfs: allow copy_file_range to copy across
> devices"), namely, cross-sb copy is not allowed for filesystems that do
> not implement ->copy_file_range().
>
> Filesystems that do implement ->copy_file_range() have full control of
> the result - if this method returns an error, the error is returned to
> the user.  Before this change this was only true for fs that did not
> implement the ->remap_file_range() operation (i.e. nfsv3).
>
> Filesystems that implement only ->remap_file_range() (i.e. xfs) may still
> fall-back to the generic_copy_file_range() implementation when the copy
> is within the same sb, but filesystem cannot handle the reuqested copied
> range.  This helps the kernel can maintain a more consistent story about
> which filesystems support copy_file_range().
>
> nfsd and ksmbd servers are modified to fall-back to the
> generic_copy_file_range() implementation in case vfs_copy_file_range()
> fails with -EOPNOTSUPP or -EXDEV, which preserves behavior of
> server-side-copy.
>
> fall-back to generic_copy_file_range() is not implemented for the smb
> operation FSCTL_DUPLICATE_EXTENTS_TO_FILE, which is arguably a correct
> change of behavior.
>
> Fixes: 5dae222a5ff0 ("vfs: allow copy_file_range to copy across devices")
> Link: https://lore.kernel.org/linux-fsdevel/20210212044405.4120619-1-drinkcat@xxxxxxxxxxxx/
> Link: https://lore.kernel.org/linux-fsdevel/CANMq1KDZuxir2LM5jOTm0xx+BnvW=ZmpsG47CyHFJwnw7zSX6Q@xxxxxxxxxxxxxx/
> Link: https://lore.kernel.org/linux-fsdevel/20210126135012.1.If45b7cdc3ff707bc1efa17f5366057d60603c45f@changeid/
> Link: https://lore.kernel.org/linux-fsdevel/20210630161320.29006-1-lhenriques@xxxxxxx/
> Reported-by: Nicolas Boichat <drinkcat@xxxxxxxxxxxx>
> Reported-by: kernel test robot <oliver.sang@xxxxxxxxx>
> Signed-off-by: Luis Henriques <lhenriques@xxxxxxx>
> Fixes: 64bf5ff58dff ("vfs: no fallback for ->copy_file_range")
> Link: https://lore.kernel.org/linux-fsdevel/20f17f64-88cb-4e80-07c1-85cb96c83619@xxxxxxxxxxxxx/
> Reported-by: He Zhe <zhe.he@xxxxxxxxxxxxx>
> Signed-off-by: Amir Goldstein <amir73il@xxxxxxxxx>
> ---
>
> Hi Steve, Namje,
>
> I was going to ping Al about this patch when I remembered that we have
> another kernel file server that supports server side copy and needs to
> be adjusted. I also realized that v13 wrongly (?) falls back to
> generic_copy_file_range() in nfs/smb client code.
>
> It would be great if you could review my ksmbd change and run the fstests
> as below in your test setup.
>
> I tested knfsd with kvm-xfstests:
> $ kvm-xfstests -c nfs -g copy_range
> ...
> nfs/loopback: 11 tests, 2 skipped, 28 seconds
>   generic/430  Pass     3s
>   generic/431  Pass     4s
>   generic/432  Pass     3s
>   generic/433  Pass     4s
>   generic/434  Pass     3s
>   generic/553  Skipped  1s
>   generic/564  Pass     3s
>   generic/565  Pass     4s
>   generic/629  Skipped  1s
> Totals: 9 tests, 2 skipped, 0 failures, 0 errors, 26s
>
> These tests were run when local server fs is ext4 (no clone support)
> and when local server fs is xfs (clone support, but not cross-sb clone),
> which is relevant for cross-fs copy test generic/565.
>
> It would be great if someone could add smb config support to kvm-xfstests
> following the existing nfs/loopback config as reference.
>
> I rather make this change to copy_file_range() syscall and nfsd/ksmbd
> with a single patch, so I will be waiting for your review/test.
>
> Olga,
>
> It would be great if you can verify my test results and also test this
> patch with nfsd server-side-copy across different combination of exported
> fs. It would also be great if you can ack that the behavior change of
> "no fall back to generic_copy_file_range() in nfs42 client" is desired.
>
> Luis,
>
> I did not added your Tested-by and RVB from v13, because the patch had
> changed. Note that you are still the author of the patch, as I felt there
> is still more code in the patch from v12 than code that I have changed.
> If you would like me to change that let me know.

I'm OK either way, I'll just ask you to keep me on the CC list please.  I
haven't looked at this rev yet, I'll try to do so tomorrow, and run some
tests against cephfs.

Cheers,
-- 
Luís

>
> Thanks,
> Amir.
>
> Changes since v13 [1]:
> - Rebased and tested over 5.19-rc1
> - Never fallback from ->copy_file_range() to generic_copy_file_range()
> - Added fallback to generic_copy_file_range() in ksmbd
> - Typo fixes in commit message and comments
>
> [1] https://lore.kernel.org/linux-fsdevel/20220520082111.2066400-1-amir73il@xxxxxxxxx/
>
>  fs/ksmbd/smb2pdu.c | 16 ++++++++--
>  fs/ksmbd/vfs.c     |  4 +++
>  fs/nfsd/vfs.c      |  8 ++++-
>  fs/read_write.c    | 77 ++++++++++++++++++++++++++--------------------
>  4 files changed, 68 insertions(+), 37 deletions(-)
>
> diff --git a/fs/ksmbd/smb2pdu.c b/fs/ksmbd/smb2pdu.c
> index e6f4ccc12f49..17f42f5b02fe 100644
> --- a/fs/ksmbd/smb2pdu.c
> +++ b/fs/ksmbd/smb2pdu.c
> @@ -7806,14 +7806,24 @@ int smb2_ioctl(struct ksmbd_work *work)
>  		src_off = le64_to_cpu(dup_ext->SourceFileOffset);
>  		dst_off = le64_to_cpu(dup_ext->TargetFileOffset);
>  		length = le64_to_cpu(dup_ext->ByteCount);
> -		cloned = vfs_clone_file_range(fp_in->filp, src_off, fp_out->filp,
> -					      dst_off, length, 0);
> +		/*
> +		 * XXX: It is not clear if FSCTL_DUPLICATE_EXTENTS_TO_FILE
> +		 * should fall back to vfs_copy_file_range().  This could be
> +		 * beneficial when re-exporting nfs/smb mount, but note that
> +		 * this can result in partial copy that returns an error status.
> +		 * If/when FSCTL_DUPLICATE_EXTENTS_TO_FILE_EX is implemented,
> +		 * fall back to vfs_copy_file_range(), should be avoided when
> +		 * the flag DUPLICATE_EXTENTS_DATA_EX_SOURCE_ATOMIC is set.
> +		 */
> +		cloned = vfs_clone_file_range(fp_in->filp, src_off,
> +					      fp_out->filp, dst_off, length, 0);
>  		if (cloned == -EXDEV || cloned == -EOPNOTSUPP) {
>  			ret = -EOPNOTSUPP;
>  			goto dup_ext_out;
>  		} else if (cloned != length) {
>  			cloned = vfs_copy_file_range(fp_in->filp, src_off,
> -						     fp_out->filp, dst_off, length, 0);
> +						     fp_out->filp, dst_off,
> +						     length, 0);
>  			if (cloned != length) {
>  				if (cloned < 0)
>  					ret = cloned;
> diff --git a/fs/ksmbd/vfs.c b/fs/ksmbd/vfs.c
> index dcdd07c6efff..8d57347231ce 100644
> --- a/fs/ksmbd/vfs.c
> +++ b/fs/ksmbd/vfs.c
> @@ -1777,6 +1777,10 @@ int ksmbd_vfs_copy_file_ranges(struct ksmbd_work *work,
>  
>  		ret = vfs_copy_file_range(src_fp->filp, src_off,
>  					  dst_fp->filp, dst_off, len, 0);
> +		if (ret == -EOPNOTSUPP || ret == -EXDEV)
> +			ret = generic_copy_file_range(src_fp->filp, src_off,
> +						      dst_fp->filp, dst_off,
> +						      len, 0);
>  		if (ret < 0)
>  			return ret;
>  
> diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c
> index 840e3af63a6f..b764213bcc55 100644
> --- a/fs/nfsd/vfs.c
> +++ b/fs/nfsd/vfs.c
> @@ -577,6 +577,7 @@ __be32 nfsd4_clone_file_range(struct svc_rqst *rqstp,
>  ssize_t nfsd_copy_file_range(struct file *src, u64 src_pos, struct file *dst,
>  			     u64 dst_pos, u64 count)
>  {
> +	ssize_t ret;
>  
>  	/*
>  	 * Limit copy to 4MB to prevent indefinitely blocking an nfsd
> @@ -587,7 +588,12 @@ ssize_t nfsd_copy_file_range(struct file *src, u64 src_pos, struct file *dst,
>  	 * limit like this and pipeline multiple COPY requests.
>  	 */
>  	count = min_t(u64, count, 1 << 22);
> -	return vfs_copy_file_range(src, src_pos, dst, dst_pos, count, 0);
> +	ret = vfs_copy_file_range(src, src_pos, dst, dst_pos, count, 0);
> +
> +	if (ret == -EOPNOTSUPP || ret == -EXDEV)
> +		ret = generic_copy_file_range(src, src_pos, dst, dst_pos,
> +					      count, 0);
> +	return ret;
>  }
>  
>  __be32 nfsd4_vfs_fallocate(struct svc_rqst *rqstp, struct svc_fh *fhp,
> diff --git a/fs/read_write.c b/fs/read_write.c
> index b1b1cdfee9d3..f7bcca1bf0e2 100644
> --- a/fs/read_write.c
> +++ b/fs/read_write.c
> @@ -1397,28 +1397,6 @@ ssize_t generic_copy_file_range(struct file *file_in, loff_t pos_in,
>  }
>  EXPORT_SYMBOL(generic_copy_file_range);
>  
> -static ssize_t do_copy_file_range(struct file *file_in, loff_t pos_in,
> -				  struct file *file_out, loff_t pos_out,
> -				  size_t len, unsigned int flags)
> -{
> -	/*
> -	 * Although we now allow filesystems to handle cross sb copy, passing
> -	 * a file of the wrong filesystem type to filesystem driver can result
> -	 * in an attempt to dereference the wrong type of ->private_data, so
> -	 * avoid doing that until we really have a good reason.  NFS defines
> -	 * several different file_system_type structures, but they all end up
> -	 * using the same ->copy_file_range() function pointer.
> -	 */
> -	if (file_out->f_op->copy_file_range &&
> -	    file_out->f_op->copy_file_range == file_in->f_op->copy_file_range)
> -		return file_out->f_op->copy_file_range(file_in, pos_in,
> -						       file_out, pos_out,
> -						       len, flags);
> -
> -	return generic_copy_file_range(file_in, pos_in, file_out, pos_out, len,
> -				       flags);
> -}
> -
>  /*
>   * Performs necessary checks before doing a file copy
>   *
> @@ -1440,6 +1418,27 @@ static int generic_copy_file_checks(struct file *file_in, loff_t pos_in,
>  	if (ret)
>  		return ret;
>  
> +	/*
> +	 * Although we now allow filesystems to handle cross sb copy, passing
> +	 * a file of the wrong filesystem type to filesystem driver can result
> +	 * in an attempt to dereference the wrong type of ->private_data, so
> +	 * avoid doing that until we really have a good reason.
> +	 *
> +	 * nfs and cifs define several different file_system_type structures
> +	 * and several different sets of file_operations, but they all end up
> +	 * using the same ->copy_file_range() function pointer.
> +	 */
> +	if (file_out->f_op->copy_file_range) {
> +		if (file_in->f_op->copy_file_range !=
> +		    file_out->f_op->copy_file_range)
> +			return -EXDEV;
> +	} else if (file_in->f_op->remap_file_range) {
> +		if (file_inode(file_in)->i_sb != file_inode(file_out)->i_sb)
> +			return -EXDEV;
> +	} else {
> +                return -EOPNOTSUPP;
> +	}
> +
>  	/* Don't touch certain kinds of inodes */
>  	if (IS_IMMUTABLE(inode_out))
>  		return -EPERM;
> @@ -1505,26 +1504,38 @@ ssize_t vfs_copy_file_range(struct file *file_in, loff_t pos_in,
>  	file_start_write(file_out);
>  
>  	/*
> -	 * Try cloning first, this is supported by more file systems, and
> -	 * more efficient if both clone and copy are supported (e.g. NFS).
> +	 * Cloning is supported by more file systems, so we implement copy on
> +	 * same sb using clone, but for filesystems where both clone and copy
> +	 * are supported (e.g. nfs,cifs), we only call the copy method.
>  	 */
> +	if (file_out->f_op->copy_file_range) {
> +		ret = file_out->f_op->copy_file_range(file_in, pos_in,
> +						      file_out, pos_out,
> +						      len, flags);
> +		goto done;
> +	}
> +
>  	if (file_in->f_op->remap_file_range &&
>  	    file_inode(file_in)->i_sb == file_inode(file_out)->i_sb) {
> -		loff_t cloned;
> -
> -		cloned = file_in->f_op->remap_file_range(file_in, pos_in,
> +		ret = file_in->f_op->remap_file_range(file_in, pos_in,
>  				file_out, pos_out,
>  				min_t(loff_t, MAX_RW_COUNT, len),
>  				REMAP_FILE_CAN_SHORTEN);
> -		if (cloned > 0) {
> -			ret = cloned;
> +		if (ret > 0)
>  			goto done;
> -		}
>  	}
>  
> -	ret = do_copy_file_range(file_in, pos_in, file_out, pos_out, len,
> -				flags);
> -	WARN_ON_ONCE(ret == -EOPNOTSUPP);
> +	/*
> +	 * We can get here if filesystem supports clone but rejected the clone
> +	 * request (e.g. because it was not block aligned).
> +	 * In that case, fall back to kernel copy so we are able to maintain a
> +	 * consistent story about which filesystems support copy_file_range()
> +	 * and which filesystems do not, that will allow userspace tools to
> +	 * make consistent desicions w.r.t using copy_file_range().
> +	 */
> +	ret = generic_copy_file_range(file_in, pos_in, file_out, pos_out, len,
> +				      flags);
> +
>  done:
>  	if (ret > 0) {
>  		fsnotify_access(file_in);
> -- 
>
> 2.25.1
>





[Index of Archives]     [Linux Filesystem Development]     [Linux USB Development]     [Linux Media Development]     [Video for Linux]     [Linux NILFS]     [Linux Audio Users]     [Yosemite Info]     [Linux SCSI]

  Powered by Linux