From: Anna Schumaker <Anna.Schumaker@xxxxxxxxxx> These patches implement a tool that can be used to read and write the sysfs files, with subcommands! The following subcommands are implemented: rpcctl client rpcctl switch rpcctl switch set rpcctl xprt rpcctl xprt set So you can print out information about every switch with: anna@client ~ % rpcctl switch switch 0: xprts 1, active 1, queue 0 xprt 0: local, /var/run/gssproxy.sock [main] switch 1: xprts 1, active 1, queue 0 xprt 1: local, /var/run/rpcbind.sock [main] switch 2: xprts 1, active 1, queue 0 xprt 2: tcp, 192.168.111.1 [main] switch 3: xprts 4, active 4, queue 0 xprt 3: tcp, 192.168.111.188 [main] xprt 4: tcp, 192.168.111.188 xprt 5: tcp, 192.168.111.188 xprt 6: tcp, 192.168.111.188 And information about each xprt: anna@client ~ % rpcctl xprt xprt 0: local, /var/run/gssproxy.sock, port 0, state <CONNECTED,BOUND>, main Source: (einval), port 0, Requests: 2 Congestion: cur 0, win 256, Slots: min 2, max 65536 Queues: binding 0, sending 0, pending 0, backlog 0, tasks 0 xprt 1: local, /var/run/rpcbind.sock, port 0, state <CONNECTED,BOUND>, main Source: (einval), port 0, Requests: 2 Congestion: cur 0, win 256, Slots: min 2, max 65536 Queues: binding 0, sending 0, pending 0, backlog 0, tasks 0 xprt 2: tcp, 192.168.111.1, port 2049, state <CONNECTED,BOUND>, main Source: 192.168.111.222, port 959, Requests: 2 Congestion: cur 0, win 256, Slots: min 2, max 65536 Queues: binding 0, sending 0, pending 0, backlog 0, tasks 0 xprt 3: tcp, 192.168.111.188, port 2049, state <CONNECTED,BOUND>, main Source: 192.168.111.222, port 921, Requests: 2 Congestion: cur 0, win 256, Slots: min 2, max 65536 Queues: binding 0, sending 0, pending 0, backlog 0, tasks 0 xprt 4: tcp, 192.168.111.188, port 2049, state <CONNECTED,BOUND> Source: 192.168.111.222, port 726, Requests: 2 Congestion: cur 0, win 256, Slots: min 2, max 65536 Queues: binding 0, sending 0, pending 0, backlog 0, tasks 0 xprt 5: tcp, 192.168.111.188, port 2049, state <CONNECTED,BOUND> Source: 192.168.111.222, port 671, Requests: 2 Congestion: cur 0, win 256, Slots: min 2, max 65536 Queues: binding 0, sending 0, pending 0, backlog 0, tasks 0 xprt 6: tcp, 192.168.111.188, port 2049, state <CONNECTED,BOUND> Source: 192.168.111.222, port 934, Requests: 2 Congestion: cur 0, win 256, Slots: min 2, max 65536 Queues: binding 0, sending 0, pending 0, backlog 0, tasks 0 You can use the `set` subcommand to change the dstaddr of individual xprts: anna@client ~ % sudo rpcctl xprt --id 4 xprt 4: tcp, 192.168.111.188, port 2049, state <CONNECTED,BOUND> Source: 192.168.111.222, port 726, Requests: 2 Congestion: cur 0, win 256, Slots: min 2, max 65536 Queues: binding 0, sending 0, pending 0, backlog 0, tasks 0 anna@client ~ % sudo rpcctl xprt set --id 4 --dstaddr server2.nowheycreamery.com xprt 4: tcp, 192.168.111.186, port 2049, state <CONNECTED,BOUND> Source: 192.168.111.222, port 726, Requests: 2 Congestion: cur 0, win 256, Slots: min 2, max 65536 Queues: binding 0, sending 0, pending 0, backlog 0, tasks 0 Or for changing the dstaddr of all xprts attached to a switch: anna@client % rpcctl switch --id 3 switch 3: xprts 4, active 4, queue 0 xprt 3: tcp, 192.168.111.188 [main] xprt 4: tcp, 192.168.111.188 xprt 5: tcp, 192.168.111.188 xprt 6: tcp, 192.168.111.188 anna@client % sudo rpcctl switch set --id 4 --dstaddr server2.nowheycreamery.vm switch 3: xprts 4, active 4, queue 0 xprt 2: tcp, 192.168.111.186 [main] xprt 3: tcp, 192.168.111.186 xprt 5: tcp, 192.168.111.186 xprt 6: tcp, 192.168.111.186 Changes in v5: - Rename from 'rpcctl' to 'rpcctl' - Rename subcommands 'xprt-switch" to 'switch' and 'rpc-client' to 'client' - Clean up how the displayed strings are generated - Handle kernels that don't yet have the srcaddr patch Thoughts? Anna Anna Schumaker (9): rpcctl: Add a rpcctl.py tool rpcctl: Add a command for printing xprt switch information rpcctl: Add a command for printing individual xprts rpcctl: Add a command for printing rpc client information rpcctl: Add a command for changing xprt dstaddr rpcctl: Add a command for changing xprt switch dstaddrs rpcctl: Add a command for changing xprt state rpcctl: Add a man page rpcctl: Add installation to the Makefile .gitignore | 2 + configure.ac | 1 + tools/Makefile.am | 2 +- tools/rpcctl/Makefile.am | 20 ++++++++ tools/rpcctl/client.py | 27 +++++++++++ tools/rpcctl/rpcctl | 5 ++ tools/rpcctl/rpcctl.man | 88 ++++++++++++++++++++++++++++++++++ tools/rpcctl/rpcctl.py | 23 +++++++++ tools/rpcctl/switch.py | 51 ++++++++++++++++++++ tools/rpcctl/sysfs.py | 42 ++++++++++++++++ tools/rpcctl/xprt.py | 101 +++++++++++++++++++++++++++++++++++++++ 11 files changed, 361 insertions(+), 1 deletion(-) create mode 100644 tools/rpcctl/Makefile.am create mode 100644 tools/rpcctl/client.py create mode 100644 tools/rpcctl/rpcctl create mode 100644 tools/rpcctl/rpcctl.man create mode 100755 tools/rpcctl/rpcctl.py create mode 100644 tools/rpcctl/switch.py create mode 100644 tools/rpcctl/sysfs.py create mode 100644 tools/rpcctl/xprt.py -- 2.33.1
