Signed-off-by: Ard Biesheuvel <ardb@xxxxxxxxxx>
---
drivers/crypto/bcm/cipher.c | 96 +-------------------
drivers/crypto/bcm/cipher.h | 1 -
drivers/crypto/bcm/spu.c | 23 +----
drivers/crypto/bcm/spu.h | 1 -
drivers/crypto/bcm/spu2.c | 12 +--
drivers/crypto/bcm/spu2.h | 1 -
6 files changed, 6 insertions(+), 128 deletions(-)
diff --git a/drivers/crypto/bcm/cipher.c b/drivers/crypto/bcm/cipher.c
index a353217a0d33..f73b4bd86482 100644
--- a/drivers/crypto/bcm/cipher.c
+++ b/drivers/crypto/bcm/cipher.c
@@ -165,10 +165,6 @@ spu_skcipher_rx_sg_create(struct brcm_message *mssg,
return -EFAULT;
}
- if (ctx->cipher.alg == CIPHER_ALG_RC4)
- /* Add buffer to catch 260-byte SUPDT field for RC4 */
- sg_set_buf(sg++, rctx->msg_buf.c.supdt_tweak, SPU_SUPDT_LEN);
-
if (stat_pad_len)
sg_set_buf(sg++, rctx->msg_buf.rx_stat_pad, stat_pad_len);
@@ -317,7 +313,6 @@ static int handle_skcipher_req(struct iproc_reqctx_s *rctx)
u8 local_iv_ctr[MAX_IV_SIZE];
u32 stat_pad_len; /* num bytes to align status field */
u32 pad_len; /* total length of all padding */
- bool update_key = false;
struct brcm_message *mssg; /* mailbox message */
/* number of entries in src and dst sg in mailbox message. */
@@ -391,28 +386,6 @@ static int handle_skcipher_req(struct iproc_reqctx_s *rctx)
}
}
- if (ctx->cipher.alg == CIPHER_ALG_RC4) {
- rx_frag_num++;
- if (chunk_start) {
- /*
- * for non-first RC4 chunks, use SUPDT from previous
- * response as key for this chunk.
- */
- cipher_parms.key_buf = rctx->msg_buf.c.supdt_tweak;
- update_key = true;
- cipher_parms.type = CIPHER_TYPE_UPDT;
- } else if (!rctx->is_encrypt) {
- /*
- * First RC4 chunk. For decrypt, key in pre-built msg
- * header may have been changed if encrypt required
- * multiple chunks. So revert the key to the
- * ctx->enckey value.
- */
- update_key = true;
- cipher_parms.type = CIPHER_TYPE_INIT;
- }
- }
-
if (ctx->max_payload == SPU_MAX_PAYLOAD_INF)
flow_log("max_payload infinite\n");
else
@@ -425,14 +398,9 @@ static int handle_skcipher_req(struct iproc_reqctx_s *rctx)
memcpy(rctx->msg_buf.bcm_spu_req_hdr, ctx->bcm_spu_req_hdr,
sizeof(rctx->msg_buf.bcm_spu_req_hdr));
- /*
- * Pass SUPDT field as key. Key field in finish() call is only used
- * when update_key has been set above for RC4. Will be ignored in
- * all other cases.
- */
spu->spu_cipher_req_finish(rctx->msg_buf.bcm_spu_req_hdr + BCM_HDR_LEN,
ctx->spu_req_hdr_len, !(rctx->is_encrypt),
- &cipher_parms, update_key, chunksize);
+ &cipher_parms, chunksize);
atomic64_add(chunksize, &iproc_priv.bytes_out);
@@ -527,9 +495,6 @@ static void handle_skcipher_resp(struct iproc_reqctx_s *rctx)
__func__, rctx->total_received, payload_len);
dump_sg(req->dst, rctx->total_received, payload_len);
- if (ctx->cipher.alg == CIPHER_ALG_RC4)
- packet_dump(" supdt ", rctx->msg_buf.c.supdt_tweak,
- SPU_SUPDT_LEN);
rctx->total_received += payload_len;
if (rctx->total_received == rctx->total_todo) {
@@ -1853,26 +1818,6 @@ static int aes_setkey(struct crypto_skcipher *cipher, const u8 *key,
return 0;
}
-static int rc4_setkey(struct crypto_skcipher *cipher, const u8 *key,
- unsigned int keylen)
-{
- struct iproc_ctx_s *ctx = crypto_skcipher_ctx(cipher);
- int i;
-
- ctx->enckeylen = ARC4_MAX_KEY_SIZE + ARC4_STATE_SIZE;
-
- ctx->enckey[0] = 0x00; /* 0x00 */
- ctx->enckey[1] = 0x00; /* i */
- ctx->enckey[2] = 0x00; /* 0x00 */
- ctx->enckey[3] = 0x00; /* j */
- for (i = 0; i < ARC4_MAX_KEY_SIZE; i++)
- ctx->enckey[i + ARC4_STATE_SIZE] = key[i % keylen];
-
- ctx->cipher_type = CIPHER_TYPE_INIT;
-
- return 0;
-}
-
static int skcipher_setkey(struct crypto_skcipher *cipher, const u8 *key,
unsigned int keylen)
{
@@ -1895,9 +1840,6 @@ static int skcipher_setkey(struct crypto_skcipher *cipher, const u8 *key,
case CIPHER_ALG_AES:
err = aes_setkey(cipher, key, keylen);
break;
- case CIPHER_ALG_RC4:
- err = rc4_setkey(cipher, key, keylen);
- break;
default:
pr_err("%s() Error: unknown cipher alg\n", __func__);
err = -EINVAL;
@@ -1905,11 +1847,9 @@ static int skcipher_setkey(struct crypto_skcipher *cipher, const u8 *key,
if (err)
return err;
- /* RC4 already populated ctx->enkey */
- if (ctx->cipher.alg != CIPHER_ALG_RC4) {
- memcpy(ctx->enckey, key, keylen);
- ctx->enckeylen = keylen;
- }
+ memcpy(ctx->enckey, key, keylen);
+ ctx->enckeylen = keylen;
+
/* SPU needs XTS keys in the reverse order the crypto API presents */
if ((ctx->cipher.alg == CIPHER_ALG_AES) &&
(ctx->cipher.mode == CIPHER_MODE_XTS)) {
@@ -2872,9 +2812,6 @@ static int aead_authenc_setkey(struct crypto_aead *cipher,
goto badkey;
}
break;
- case CIPHER_ALG_RC4:
- ctx->cipher_type = CIPHER_TYPE_INIT;
- break;
default:
pr_err("%s() Error: Unknown cipher alg\n", __func__);
return -EINVAL;
@@ -3573,25 +3510,6 @@ static struct iproc_alg_s driver_algs[] = {
},
/* SKCIPHER algorithms. */
- {
- .type = CRYPTO_ALG_TYPE_SKCIPHER,
- .alg.skcipher = {
- .base.cra_name = "ecb(arc4)",
- .base.cra_driver_name = "ecb-arc4-iproc",
- .base.cra_blocksize = ARC4_BLOCK_SIZE,
- .min_keysize = ARC4_MIN_KEY_SIZE,
- .max_keysize = ARC4_MAX_KEY_SIZE,
- .ivsize = 0,
- },
- .cipher_info = {
- .alg = CIPHER_ALG_RC4,
- .mode = CIPHER_MODE_NONE,
- },
- .auth_info = {
- .alg = HASH_ALG_NONE,
- .mode = HASH_MODE_NONE,
- },
- },
{
.type = CRYPTO_ALG_TYPE_SKCIPHER,
.alg.skcipher = {
@@ -4495,15 +4413,9 @@ static void spu_counters_init(void)
static int spu_register_skcipher(struct iproc_alg_s *driver_alg)
{
- struct spu_hw *spu = &iproc_priv.spu;
struct skcipher_alg *crypto = &driver_alg->alg.skcipher;
int err;
- /* SPU2 does not support RC4 */
- if ((driver_alg->cipher_info.alg == CIPHER_ALG_RC4) &&
- (spu->spu_type == SPU_TYPE_SPU2))
- return 0;
-
crypto->base.cra_module = THIS_MODULE;
crypto->base.cra_priority = cipher_pri;
crypto->base.cra_alignmask = 0;
diff --git a/drivers/crypto/bcm/cipher.h b/drivers/crypto/bcm/cipher.h
index b6d83e3aa46c..035c8389cb3d 100644
--- a/drivers/crypto/bcm/cipher.h
+++ b/drivers/crypto/bcm/cipher.h
@@ -388,7 +388,6 @@ struct spu_hw {
u16 spu_req_hdr_len,
unsigned int is_inbound,
struct spu_cipher_parms *cipher_parms,
- bool update_key,
unsigned int data_size);
void (*spu_request_pad)(u8 *pad_start, u32 gcm_padding,
u32 hash_pad_len, enum hash_alg auth_alg,
diff --git a/drivers/crypto/bcm/spu.c b/drivers/crypto/bcm/spu.c
index e7562e9bf396..fe126f95c702 100644
--- a/drivers/crypto/bcm/spu.c
+++ b/drivers/crypto/bcm/spu.c
@@ -222,10 +222,6 @@ void spum_dump_msg_hdr(u8 *buf, unsigned int buf_len)
cipher_key_len = 24;
name = "3DES";
break;
- case CIPHER_ALG_RC4:
- cipher_key_len = 260;
- name = "ARC4";
- break;
case CIPHER_ALG_AES:
switch (cipher_type) {
case CIPHER_TYPE_AES128:
@@ -919,21 +915,16 @@ u16 spum_cipher_req_init(u8 *spu_hdr, struct spu_cipher_parms *cipher_parms)
* @spu_req_hdr_len: Length in bytes of the SPU request header
* @isInbound: 0 encrypt, 1 decrypt
* @cipher_parms: Parameters describing cipher operation to be performed
- * @update_key: If true, rewrite the cipher key in SCTX
* @data_size: Length of the data in the BD field
*
* Assumes much of the header was already filled in at setkey() time in
* spum_cipher_req_init().
- * spum_cipher_req_init() fills in the encryption key. For RC4, when submitting
- * a request for a non-first chunk, we use the 260-byte SUPDT field from the
- * previous response as the key. update_key is true for this case. Unused in all
- * other cases.
+ * spum_cipher_req_init() fills in the encryption key.
*/
void spum_cipher_req_finish(u8 *spu_hdr,
u16 spu_req_hdr_len,
unsigned int is_inbound,
struct spu_cipher_parms *cipher_parms,
- bool update_key,
unsigned int data_size)
{
struct SPUHEADER *spuh;
@@ -948,11 +939,6 @@ void spum_cipher_req_finish(u8 *spu_hdr,
flow_log(" in: %u\n", is_inbound);
flow_log(" cipher alg: %u, cipher_type: %u\n", cipher_parms->alg,
cipher_parms->type);
- if (update_key) {
- flow_log(" cipher key len: %u\n", cipher_parms->key_len);
- flow_dump(" key: ", cipher_parms->key_buf,
- cipher_parms->key_len);
- }
/*
* In XTS mode, API puts "i" parameter (block tweak) in IV. For
@@ -981,13 +967,6 @@ void spum_cipher_req_finish(u8 *spu_hdr,
else
cipher_bits &= ~CIPHER_INBOUND;
- /* update encryption key for RC4 on non-first chunk */
- if (update_key) {
- spuh->sa.cipher_flags |=
- cipher_parms->type << CIPHER_TYPE_SHIFT;
- memcpy(spuh + 1, cipher_parms->key_buf, cipher_parms->key_len);
- }
-
if (cipher_parms->alg && cipher_parms->iv_buf && cipher_parms->iv_len)
/* cipher iv provided so put it in here */
memcpy(bdesc_ptr - cipher_parms->iv_len, cipher_parms->iv_buf,
diff --git a/drivers/crypto/bcm/spu.h b/drivers/crypto/bcm/spu.h
index b247bc5b9354..dd132389bcaa 100644
--- a/drivers/crypto/bcm/spu.h
+++ b/drivers/crypto/bcm/spu.h
@@ -251,7 +251,6 @@ void spum_cipher_req_finish(u8 *spu_hdr,
u16 spu_req_hdr_len,
unsigned int is_inbound,
struct spu_cipher_parms *cipher_parms,
- bool update_key,
unsigned int data_size);
void spum_request_pad(u8 *pad_start,
diff --git a/drivers/crypto/bcm/spu2.c b/drivers/crypto/bcm/spu2.c
index 59abb5ecefa4..c860ffb0b4c3 100644
--- a/drivers/crypto/bcm/spu2.c
+++ b/drivers/crypto/bcm/spu2.c
@@ -1170,21 +1170,16 @@ u16 spu2_cipher_req_init(u8 *spu_hdr, struct spu_cipher_parms *cipher_parms)
* @spu_req_hdr_len: Length in bytes of the SPU request header
* @isInbound: 0 encrypt, 1 decrypt
* @cipher_parms: Parameters describing cipher operation to be performed
- * @update_key: If true, rewrite the cipher key in SCTX
* @data_size: Length of the data in the BD field
*
* Assumes much of the header was already filled in at setkey() time in
* spu_cipher_req_init().
- * spu_cipher_req_init() fills in the encryption key. For RC4, when submitting a
- * request for a non-first chunk, we use the 260-byte SUPDT field from the
- * previous response as the key. update_key is true for this case. Unused in all
- * other cases.
+ * spu_cipher_req_init() fills in the encryption key.
*/
void spu2_cipher_req_finish(u8 *spu_hdr,
u16 spu_req_hdr_len,
unsigned int is_inbound,
struct spu_cipher_parms *cipher_parms,
- bool update_key,
unsigned int data_size)
{
struct SPU2_FMD *fmd;
@@ -1196,11 +1191,6 @@ void spu2_cipher_req_finish(u8 *spu_hdr,
flow_log(" in: %u\n", is_inbound);
flow_log(" cipher alg: %u, cipher_type: %u\n", cipher_parms->alg,
cipher_parms->type);
- if (update_key) {
- flow_log(" cipher key len: %u\n", cipher_parms->key_len);
- flow_dump(" key: ", cipher_parms->key_buf,
- cipher_parms->key_len);
- }
flow_log(" iv len: %d\n", cipher_parms->iv_len);
flow_dump(" iv: ", cipher_parms->iv_buf, cipher_parms->iv_len);
flow_log(" data_size: %u\n", data_size);
diff --git a/drivers/crypto/bcm/spu2.h b/drivers/crypto/bcm/spu2.h
index 03af6c38df7f..6e666bfb3cfc 100644
--- a/drivers/crypto/bcm/spu2.h
+++ b/drivers/crypto/bcm/spu2.h
@@ -200,7 +200,6 @@ void spu2_cipher_req_finish(u8 *spu_hdr,
u16 spu_req_hdr_len,
unsigned int is_inbound,
struct spu_cipher_parms *cipher_parms,
- bool update_key,
unsigned int data_size);
void spu2_request_pad(u8 *pad_start, u32 gcm_padding, u32 hash_pad_len,
enum hash_alg auth_alg, enum hash_mode auth_mode,
--
2.17.1
