Hi Sven- > On Jan 26, 2020, at 6:41 PM, Sven Breuner <sven@xxxxxxxxxxxx> wrote: > > Hi, > > I'm using the kernel NFS client/server and am trying to read as many small files per second as possible from a single NFS client, but seem to run into a bottleneck. > > Maybe this is just a tunable that I am missing, because the CPUs on client and server side are mostly idle, the 100Gbit (RoCE) network links between client and server are also mostly idle and the NVMe drives in the server are also mostly idle (and the server has enough RAM to easily fit my test data set in the ext4/xfs page cache, but also a 2nd read of the data set from the RAM cache doesn't change the result much). > > This is my test case: > # Create 1.6M 10KB files through 128 mdtest processes in different directories... > $ mpirun -hosts localhost -np 128 /path/to/mdtest -F -d /mnt/nfs/mdtest -i 1 -I 100 -z 1 -b 128 -L -u -w 10240 -e 10240 -C > > # Read all the files through 128 mdtest processes (the case that matters primarily for my test)... > $ mpirun -hosts localhost -np 128 /path/to/mdtest -F -d /mnt/nfs/mdtest -i 1 -I 100 -z 1 -b 128 -L -u -w 10240 -e 10240 -E > > The result is about 20,000 file reads per sec, so only ~200MB/s network throughput. What is the typical size of the NFS READ I/Os on the wire? Are you sure your mpirun workload is generating enough parallelism? > I noticed in "top" that only 4 nfsd processes are active, so I'm wondering why the load is not spread across more of my 64 /proc/fs/nfsd/threads, but even the few nfsd processes that are active use less than 50% of their core each. The CPUs are shown as >90% idle in "top" on client and server during the read phase. > > I've tried: > * CentOS 7.5 and 7.6 kernels (3.10.0-...) on client and server; and Ubuntu 18 with 4.18 kernel on server side > * TCP & RDMA > * Mounted as NFSv3/v4.1/v4.2 > * Increased tcp_slot_table_entries to 1024 > > ...but all that didn't change the fact that only 4 nfsd processes are active on the server and thus I'm getting the same result already if /proc/fs/nfsd/threads is set to only 4 instead of 64. > > Any pointer to how I can overcome this limit will be greatly appreciated. > > Thanks in advance > > Sven > -- Chuck Lever