Re: Regression in 5.1.20: Reading long directory fails

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




> On Sep 11, 2019, at 12:25 PM, Benjamin Coddington <bcodding@xxxxxxxxxx> wrote:
> 
> On 6 Sep 2019, at 16:50, Chuck Lever wrote:
> 
>>> On Sep 6, 2019, at 4:47 PM, Jason L Tibbitts III <tibbs@xxxxxxxxxxx> wrote:
>>> 
>>>>>>>> "JBF" == J Bruce Fields <bfields@xxxxxxxxxxxx> writes:
>>> 
>>> JBF> Those readdir changes were client-side, right?  Based on that I'd
>>> JBF> been assuming a client bug, but maybe it'd be worth getting a full
>>> JBF> packet capture of the readdir reply to make sure it's legit.
>>> 
>>> I have been working with bcodding on IRC for the past couple of days on
>>> this.  Fortunately I was able to come up with way to fill up a directory
>>> in such a way that it will fail with certainty and as a bonus doesn't
>>> include any user data so I can feel OK about sharing packet captures.  I
>>> have a capture alongside a kernel trace of the problematic operation in
>>> https://www.math.uh.edu/~tibbs/nfs/.  Not that I can particularly tell
>>> anything useful from that, but bcodding says that it seems to point to
>>> some issue in sunrpc.
>>> 
>>> And because I can easily reproduce this and I was able to do a bisect:
>>> 
>>> 2c94b8eca1a26cd46010d6e73a23da5f2e93a19d is the first bad commit
>>> commit 2c94b8eca1a26cd46010d6e73a23da5f2e93a19d
>>> Author: Chuck Lever <chuck.lever@xxxxxxxxxx>
>>> Date:   Mon Feb 11 11:25:41 2019 -0500
>>> 
>>>   SUNRPC: Use au_rslack when computing reply buffer size
>>> 
>>>   au_rslack is significantly smaller than (au_cslack << 2). Using
>>>   that value results in smaller receive buffers. In some cases this
>>>   eliminates an extra segment in Reply chunks (RPC/RDMA).
>>> 
>>>   Signed-off-by: Chuck Lever <chuck.lever@xxxxxxxxxx>
>>>   Signed-off-by: Anna Schumaker <Anna.Schumaker@xxxxxxxxxx>
>>> 
>>> :040000 040000 d4d1ce2fbe0035c5bd9df976b8c448df85dcb505 7011a792dfe72ff9cd70d66e45d353f3d7817e3e M      net
>>> 
>>> But of course, I can't say whether this is the actual bad commit or
>>> whether it just introduced a behavior change which alters the conditions
>>> under which the problem appears.
>> 
>> The first place I'd start looking is the XDR constants at the head of fs/nfs/nfs4xdr.c
>> having to do with READDIR.
> 
> Well, one thing is that I wonder about decode_readdir_maxsz including
> decode_verifier_maxsz since it is part of READDIR4resok, and so should be
> included in the page data.. but that really doesn't matter here, I think we
> just end up with a larger head.  Moving the start of the tail two words
> forward doesn't seem to fix things..
> 
> I think the mic's xdr_buf_subsegment is getting partially split between
> leftover space in the pages and the tail, so the checks for the length of
> the subbuf do not match the length of mic.  In that case, we usually just
> have extra room in the tail to copy it over, but now that rslack is not so
> slack, the only extra room (as determined in xdr_buf_read_netobj()) would be
> extra space in the page data, which we can't use.
> 
> The problem is that xdr_buf_read_netobj() is using xdr_buf_subsegment() with
> an offset in the response data to the mic, but xdr_buf_subsegement() decides
> what to do based on offsets in the already set-up xdr_buf.  If the server's
> response leaves a hole in the page_len less than the mic, then the mic
> subsegment straddles the page and the tail.  Then we try to copy it to the
> end of the tail, but now there's not enough room.
> 
> Instead, I think we want to make sure the mic falls squarely into the tail
> every time.

I'm not clear how you could do that. The length of the page data is not
known to the client before it parses the reply. Are you suggesting that
gss_unwrap should do it somehow?


> xdr_buf_read_netobj() is only used for the mic, so it seems like we can
> refactor it to just use the tail, or get rid of it altogether.  I'll see if
> I can do that.
> 
> Read on, if you want some numbers to check my work..
> 
> Here's how to reproduce:
> Init an xdr_buf of 176, so rq_rcvsize is:
> 4  RPC_REPHDRSIZE
> 19  auth->au_rslack
> 21  .p_replen
> -----
> 44<<2 = 176
> 
> Then xdr_inline_pages() with:
> - offset 140:
>    21  resp.hdr
>     4  RPC_REPHDRSIZE
>    11  auth->au_ralign
>    -1  xdr pad fixup
>    -----
>    35<<2 = 140
> 
> - base of 88 (that's static entries for . and ..)
> - len of 262056 (64 pages - base of 88)
> 
> This gives us the following xdr_buf:
> 
> struct xdr_buf {
>    head->iov_len = 140,
>    tail->iov_len = 32,
>    page_len = 262056,
>    buflen = 262232
> }
> 
> Then, get a READDIR response of total length 232208:
> 
> 56 bytes to GSS data
> 76 bytes to READDIR4resok
> 262044 bytes of READDIR4resok
> 32 bytes of mic
> 
> That puts the mic at offset 262176.
> 
> That all looks right, and the response is well-formed.
> 
> Things go badly in xdr_read_netobj() with offset 262176:
> 
> We return -ENOMEM when
> obj->len (28) is > than buf->buflen (262232) - buf->len (262208)
> 
> Ben

--
Chuck Lever







[Index of Archives]     [Linux Filesystem Development]     [Linux USB Development]     [Linux Media Development]     [Video for Linux]     [Linux NILFS]     [Linux Audio Users]     [Yosemite Info]     [Linux SCSI]

  Powered by Linux